Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 ❤ LYN Proton INSPIRA: Owners/Fan Thread V5 ❤, SMART GUYS GET IT! | Got yours yet?

views
     
shahie
post Mar 28 2011, 07:46 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
Hi,

Can someone let me know their temperature reading on their info panel ? mine shown up to 39C during normal day, seem to be incorrect reading.
shahie
post Mar 28 2011, 08:21 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(ckk125 @ Mar 28 2011, 08:08 PM)
er...y not?it is normal
*
if not mistaken, the sensor is on the front bumper right? i think it sense the engine compartment temperature too. otherwise our normal temp is not that high right ?
shahie
post Apr 8 2011, 04:01 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(Pip_X @ Apr 8 2011, 02:45 PM)
I ter-tested the ABS system twice yesterday.
Stupid Alza suddenly masuk my lane right after green light, s/he wanna belok kanan while s/he was at lorong kiri. Teakn break, ABS light come out. Babi.
Then 5 minutes later I was on a straight lane doing 120kmh suddenly a Myvi at the slow lane cut to my fast lane to try to masuk the junction next to me. Tekan break ABS light come out again. Babi.
If I can think clearly that time, I langgar terus so that I can claim their insurance and take Evo X bumper...
Both also Produa cars. I fking hate Produa owners now.
*
Anyone can confirm, did ABS light came out is normal under that situation ? or if there is any mulfunction with ABS system then that light come out ?
shahie
post Apr 8 2011, 06:59 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(rockets @ Apr 8 2011, 04:23 PM)
during hard braking, when the ABS kicks in you can feel your brake pedal vibrate. that's usually an indication your ABS is working.
*
But... did the ABS Light come up ?
shahie
post Apr 13 2011, 12:26 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(DM3 @ Apr 13 2011, 11:20 AM)

mine is only 2.5k at the moment, i think i cannt wait til 10k. Worry damage the gear
*
The thing has been design for certain mileage, 40K in this case, you may change at 30K is too good already, unless you want to make proton /eon rich. how bad it is? maybe it's only your feeling?

This post has been edited by shahie: Apr 13 2011, 12:28 PM
shahie
post Apr 18 2011, 02:10 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(lonetitans @ Apr 18 2011, 02:01 PM)
Engine light on, not enough engine oil due to leak is it?
*
Don't confuse, that check engine light. MUT Test can do well to check which sensor fail
shahie
post Apr 23 2011, 01:25 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(Matrix @ Apr 23 2011, 01:15 PM)
I second that. Be proud of Proton mah! Changing emblem is so Ah Beng/Ah Lian.... tongue.gif
*
my friend at brunei bought mitsubishi lancer GT changed label to proton, i can't say anything.. except LoL

This post has been edited by shahie: Apr 23 2011, 01:27 PM
shahie
post Apr 24 2011, 08:59 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(cle900706 @ Apr 24 2011, 08:46 PM)
user posted image
get this when my bro driving it around 180-200, his driving it like his civic. drove it around 1hour++

driving style shifting gears like mad babe~
but as i know for lancer, they will limit ur speed at 110 untill the warning sign goes off. then only can drive fast back~

though the warning sign came out, still my bro maintain at 160 then 140 for around 15mins, then the warning sigh never appear again later on eventhough for another 180-200 speed.

as i can say from this, well, proton did improve on the cvt cooling which is obviously better than lancer, but not completely. kinda shock when see this.
p/s:this will happen if u drive shifting lots of times during high speed i guess. b4 tis i never get this b4. salute my bro aka Gouki  doh.gif  doh.gif  sweat.gif  sweat.gif
*
My advise to you is, visit SC to change your CVT oil. It is a sign of burning already.
shahie
post Apr 25 2011, 07:11 AM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(cle900706 @ Apr 24 2011, 11:59 PM)
lol~ skve~

my mileage oni 2k bro........ seriously must change asap?
*
If you love your CVT, better change ASAP, you heat your CVT oil temp to the max already. It less than RM300 to change compare to new CVT gearbox cost you 20k
shahie
post Apr 25 2011, 10:55 AM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(cle900706 @ Apr 25 2011, 08:26 AM)
sad lo. suddenly nid use more money on nex service. =..=! and need to drive like auntie from now onwards
*
You happy got highway to test your car, mine in Miri, speeding 100KM/h for 2 minute also no chance. until now i only can rev my car not come to 3k RPM. still virgin even my milage is 2k now.. LoL
shahie
post Apr 25 2011, 06:25 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(Matrix @ Apr 25 2011, 05:32 PM)
Guys...how long it takes for you guys to wait loan approval and get the car?? This waiting is killing me...and now my missus suddenly very anxious to get the car to drive outstation over the weekend (Holiday on Monday)....if can get by this Friday, it's a miracle i suppose!
*
Read this... It may help you to get the answer

http://www.inspiraclub.com/viewtopic.php?f=7&t=269
shahie
post Apr 25 2011, 08:08 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(Matrix @ Apr 25 2011, 07:38 PM)
Just choose the one who can give you lowest rates + max discount!!!  tongue.gif


Added on April 25, 2011, 7:42 pm
Yeah,,, all the old info mostly during launch time. Anyway, i told my SA...whether can get by this Friday...haha...she cannot confirm with me (at least, no empty promise!). But advise me to get ready downpayment in bank draft instead of cheque, which needs 2-3 days clearing time. So once i signed the contract with bank, can straight go there to pay (and provided she got the car stock arrived...).
*
Did your SA bring you to the stockyard to choose your car ? They should bring you there once your loan is approved unless no car at stock yard.
shahie
post Apr 25 2011, 08:55 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(Matrix @ Apr 25 2011, 08:18 PM)
Loan not approved yet lar, just submitted today only and the banker called me this afternoon. Can choose like that? I dun think so rite, they'll need to register a specific car for allocation. How to choose, it's all the same, unless u spend whole day inspecting all the cars....sweat.gif...
*
Mine the other day, my SA picked me up and bring me to his stockyard, that time only got 2 units of 2.0CVT silver color (chassis no 303x & 304x), i have a freedom to choose which chassis no i want. btw i'm getting from proton edar.

This post has been edited by shahie: Apr 25 2011, 08:56 PM
shahie
post Apr 27 2011, 04:32 PM

On my way
****
Junior Member
506 posts

Joined: Feb 2005
QUOTE(skcs1985 @ Apr 27 2011, 02:38 PM)
original lancer material PP i think.

i still cant find any LGT front bumper seller
*
I like the GT front bumper too but can we put proton logo there? Anyone manage to do that and don't mine to share their foto?

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0210sec    0.66    7 queries    GZIP Disabled
Time is now: 12th December 2025 - 06:36 PM