Outline ·
[ Standard ] ·
Linear+
So you're interested in ARCHITECTURE? Version 3, A guide to becoming an Architect
|
josephlau7966
|
 Feb 5 2013, 03:22 PM
|
Getting Started
|
I am working as engineer in M&E consulting firm and always deal with architect. We are working together as a team in a construction project. During construction stage, I feel like our scope of work is more inclined towards construction and resources management. Since I was in engineering school and learned nothing about construction. It is quite tough for me as a junior to handle the job. I can say technical design stuff is quite easy as there would be no engineering math, calculus, finite element analysis and all other in depth subject in engineering. All math calculations are quite straight forward even a form 5 student can grasp it. For the time being, I am quite interested to venture into green building and energy efficiency in building. I reckon this is where the essence of building services engineering knowledge lies within.
|
|
|
|
|
|
josephlau7966
|
Oct 27 2014, 11:34 AM
|
Getting Started
|
Can we discuss the computer spec for running Autocad drawings. I am doing research to buy one for my working usage.
|
|
|
|
|
|
josephlau7966
|
Oct 27 2014, 12:11 PM
|
Getting Started
|
QUOTE(azarimy @ Oct 27 2014, 11:41 AM) sure. just pop the questions and i'm sure people will answer. Azarimy, what is your recommendation for laptop? I am now looking at Lenovo gaming laptop at the moment. But I am not into computer games. I just need high spec for Autocad drawing graphic. I am now using dell inspiron. |
|
|
|
|
|
josephlau7966
|
Oct 28 2014, 11:20 AM
|
Getting Started
|
QUOTE(azarimy @ Oct 27 2014, 12:19 PM) depends what u wanna use it for: 2D autocad or 3D with renderings? if it's only 2D, then literally any laptop built in the last 5 years can handle anything u throw at it. for 3D, then u need to find the best processor (preferably i7 family) with a lot of RAM (preferably 16GB). Well, Arazimy, actually I am M&E engineer for building. As you know, we work closely with architect in building construction projects. Currently I am using AutoCAD LT for work, just deal with all 2D drawings and it is sufficient for Malaysia construction industry. However, I am all the while interested in 3D layout and dealing with AutoCAD MEP revit to be more professional. So a high spec laptop might be helpful. Do you think Malaysia building construction industry is going towards utilizing this kind of advance technology? Sometimes, it is quite sad to compare with the other countries while their construction technology are far more ahead of us. And we are still lagging behind to use all the conventional methods for cost saving purpose. |
|
|
|
|
|
josephlau7966
|
Nov 11 2014, 08:52 PM
|
Getting Started
|
QUOTE(azarimy @ Nov 6 2014, 08:55 AM) sure. but there are many bim software out there, each has its own library and community. thing is, unlike sketchup, bim is directly related to local practice. meaning, u would want local product libraries with prices in RM and u can contact the manufacturers directly. we still lack those, as the msian bim community is still small. but we do borrow lots from sgpore... Is Autodesk Revit the most popular at the moment? I am thinking over to learn that in the near future. |
|
|
|
|
|
josephlau7966
|
Nov 11 2014, 10:33 PM
|
Getting Started
|
QUOTE(azarimy @ Nov 11 2014, 10:07 PM) so far in malaysia, it's the most dominant one. but revit is almost exclusive to PC users. there are many companies out there that are non-PC based. but simply put, u learn one, it's not hard to learn the other. Non-PC based? can you elaborate on this? I would like to find out that the design generated by Revit can be imported or transferred to Autocad LT. |
|
|
|
|
|
josephlau7966
|
Apr 21 2016, 09:41 AM
|
Getting Started
|
QUOTE(azarimy @ Apr 20 2016, 12:33 AM) personally i dont see much difference between competitiveness of those two schools in getting job placements. u should not worry about it. the most important thing people need to know about architecture is at the end of the day it's YOU that determines your chances of landing a job. employers now look for skills, abilities and attitude - it doesn't matter where you came from. there's a checklist of things u need to cover before u sit for part 2. as long as u have these covered, u should fare well in the exams. En Azarimy, is there any opportunity to be involve in practicing in construction project since you are working as academician in UTM? what is the ratio between these two workload for your position now? |
|
|
|
|
|
josephlau7966
|
Sep 28 2020, 09:38 PM
|
Getting Started
|
QUOTE(azarimy @ Sep 26 2020, 07:56 PM) It depends on your job spec and responsibilities. First, the best way to ensure you've acquired experience as a part 1 holder, is to work under an architect. Preferably part 3, but part 2 is acceptable too. This does not mean you have to work in an architecture firm. It could be a developer, interior designer, landscape architect, contractor or anything under the built environment. In fact, you could work in Tesco or Ikea, if they have a design/architecture/building department. It all boils down to the experience you acquired throughout. Even if you worked in a big firm, but you became the driver for the boss or tukang bancuh kopi, you wouldnt be able to acquire proper working experience to qualify for the masters programme! Some job roles are too specific. Let's say if you work as a design architect only, you could hardly deal with site and contractual issues like a project architect. Thus, the experience you gain is not "all-rounded" enough to sit for exam. You are lacking of project management skill. The only thing you can do is to change company. |
|
|
|
|
|
josephlau7966
|
Sep 28 2020, 10:50 PM
|
Getting Started
|
QUOTE(azarimy @ Sep 28 2020, 10:32 PM) You could inform the management that you need a wider scope for your job in order to gain better experience to continue to part 2. Most firms would be more than willing to accommodate, but some don't. Careful with those that don't. This is a typical sign where they want you to be where you are: a low wage worker for as long as they can. Not giving an opportunity to advance is a tell-tale sign of a bad employer. More the reason to change company. Hi Azarimy, thanks for your reply. Your opinion is very much appreciated. This post has been edited by josephlau7966: Sep 28 2020, 10:56 PM |
|
|
|
|
Quote
0.0664sec
0.65
7 queries
GZIP Disabled