Welcome Guest ( Log In | Register )

63 Pages « < 53 54 55 56 57 > » Bottom

Outline · [ Standard ] · Linear+

 So you're interested in ARCHITECTURE? Version 3, A guide to becoming an Architect

views
     
TSazarimy
post May 18 2016, 02:07 PM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(bluetiang @ May 18 2016, 01:10 PM)
Hi Sir Azari,

I am a diploma holder and I applied to UTM as my first choice via UPU. I understand that the Sept. intake's interview is going on now. So I called UPU to check my application status, and the officer said that I'll have an interviews in UTM next week. But the fact that I haven't get any call or text from UPU or UTM is making me quite confusing.

I assumed that UTM will interview all the qualified candidates from UPU; or UTM will do another round of filtration?

I've tried to call the Intake Department, but seems like no one is picking up the phone. Can you help me with explaining how does these procedure works? Cause if the interview is held by next week, then I'll have to start preparing my interview by NOW.

Sorry for trouble and thanks.
*
this week is the interview session for 1st year intake (STPM/matrics). so that's why a lot of people are a bit busy and not picking up their phones (i think lah). do call UTM > FAB > academic office. they will know the exact status of ur application.

sorry i'm away, cant find the number for u.
TSazarimy
post May 25 2016, 06:41 AM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(tomaserif @ May 25 2016, 01:16 AM)
Hi Mr Azarimy,

As per link below, I couldn't see BSc Arch being offered for Sept '16 intake.
http://www.utmspace.edu.my/intake/Maklumat...ranProgram.aspx

Not this year either?  sad.gif
*
They are in the final stages of offering it. It will open once they get the greenlight from everyone.
TSazarimy
post May 25 2016, 08:02 AM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


No estimates yet.
TSazarimy
post May 30 2016, 07:58 AM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(tomaserif @ May 30 2016, 07:54 AM)
Do you guys have any deadline for the final stage? I'm checking UTMSpace website every other day.
*
Because UTM SPACE is relatively a private school, their intake is more fluid and not under UPU. In the past, they do open running intake sessions. Meaning if u are interested, come to the open day, bawak sijil etc, sit for an interview and register right then and there.

All in one day.

Meaning worst case scenario, they'll do another session like this. And even if u missed it, they can always arrange for something.
TSazarimy
post May 30 2016, 08:04 AM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(tomaserif @ May 30 2016, 08:02 AM)
Thanks, Ill continue checking the website then.
*
I expect an update after raya. But do checkup once a week, or here as well.
TSazarimy
post May 30 2016, 11:17 AM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(bluetiang @ May 30 2016, 11:04 AM)
Hi Mr. Azarimy

I'm wondering if the interview calling has ended for every category? Im applying degree in architecture from UTM with my diploma.
*
diploma intake interview is this thursday (for fulltime programme). you should check your status with the academic office.
TSazarimy
post Jun 21 2016, 01:27 PM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(Gundam Masta @ Jun 21 2016, 11:24 AM)
Hi, not sure whether i can ask here, im in b.arch second yr, doing a video for a subject called computer applications, so im trying to use lumion, but when i import my 3d building and place on the terrain, but it always appear in the sky, even i trie changing height in lumion, it has a limit of the height displacement which is still in the sky. hopefully any seniors here are able to help out, thanks smile.gif
*
i dont use lumion. but if i were to venture a guess, could u check the origin of the building model? i suspect the origin has been accidentally moved (translated) elsewhere. try either put the origin back near or on the building, or bring the building near to the origin.
TSazarimy
post Jun 23 2016, 11:38 PM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(elsinor @ Jun 23 2016, 11:04 PM)
Would like to check if i am taking part  3 exam next year and right now thinking of changing job,  can i venture into developer company and work as their in house architect? Got an offer and was told that all design and drawings are solely done by the in house  architect. Im not sure if it would affect the part 3 exam as it requires all architects who are going for part 3 exam to work for 2 years under an archi firm.
*
if i recall correctly, u need to work for 2 years under the supervision of a practicing part 3 architect. if not, all those JKR people shouldnt be able to qualify.

switching jobs are fine. people do that all the time. but make sure the new office has a practicing part 3 architect to supervise u, even if it's only a developer company.
TSazarimy
post Jun 25 2016, 11:57 PM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(zackngbs @ Jun 25 2016, 11:24 PM)
Sir , bachelor of science in architecture of UTM is actually in KL or Johor ?
*
johor.

the only architecture program we hold in KL is diploma.
TSazarimy
post Jul 11 2016, 08:57 AM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(cend @ Jul 11 2016, 02:13 AM)
Hello.

I am finishing my Part 1 Bachelor Degree in Architecture soon.

My lecturer commended me on having quite good on design theory and developing concept statements. However he did gave me an advice that Malaysian's field of study on architecture are more focused on the technical side, compared to the ones abroad which pushes more on the design concepts. I know that LAM no longer accredits Part 2 RIBA courses, but he did say I am more geared to UK school of thought based on how I did my project and possibly faces challenge if I study locally (or even practice).

I would like to ask, is Malaysian architecture industry isn't really that interested in new concepts and ideas? Rather design another building (based on existing ones), only the cladding/skin and facade is "designed" to give meaning instead of utilising whatever we studied. It's unlike how I've seen and read about other international firms do their design development especially on competitions.

I don't know. My strength isn't there because I loathe this situation as I have experienced in my practical training. I didn't doubt about my ability to delve deeper in architecture, but the expectation of the industry to accept me specifically in local context.

I am still learning who knows nothing much and just only got the gist of architecture, but I'm really worried about my career path. I think I'm ill suited to continue for my Masters/Part 2  sad.gif
*
This is a bit tricky, because the issue about technical competency isnt unique in msia. It is also a problem in the UK. But what makes it more of a problem in msia (or any asian countries) for that matter is that we are easily pushed over.

And by that i mean by other consultants. U will immediately notice this when u go into practice soon. Without technical competency, u cant even supervise a diploma holder on whether their working dwgs that they just completed for u is correct or not.

Then there's the civil engineers who will refuse to figure out ur slightly different beam structure; and the mechanical eng who will bitch about the otherwise simple plumbing system; or the QS who just dont give a damn about ur design and just say "its too expensive"!

Basically, if u dont have the technical expertise, u can forget about those design theories bcoz u'll get bulldozed by others.

Why is it less prevalent in the UK? Bcoz the programme makes them resourceful architects who can learn what they need when they need it and have the BALLS to push through. And they have consultants and builders who are eager to realize YOUR dreams (and get paid doing so).

So if u wanna study locally, find schools that are both technically and theoretically strong.
TSazarimy
post Jul 22 2016, 04:09 PM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(tammy30 @ Jul 22 2016, 02:09 PM)
But I have seldom seen any architect driving less than a Mercedes Benz in Msia.
*
architects dont do what normal people do. when everyone wears colour, he'll wear black. when everyone drinks starbucks, he'll go coffee bean. when everyone drives mercedez, he'll probably drive an audi wink.gif.
TSazarimy
post Jul 30 2016, 09:55 AM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


Update:

LAM will proceed in revoking automatic accreditation of foreign degrees as previously mentioned first thing next year (1 jan 2017). CAAEM is currently in the process of validating overseas schools which is part of international recognition programme.

at the moment, ONE university have acquired validation for both LAM part 1 and 2:

Monash University
Monash Art Design and Architecture (MADA)
Australia.

please note that accreditation and validation does not trickle down to its sister/branch schools. meaning dont enroll to monash malaysia and assume it's also accredited! more schools are in the validation pipeline, so please bear with us.
TSazarimy
post Jul 30 2016, 01:36 PM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(akioen @ Jul 30 2016, 01:17 PM)
Hi Mr Aza, may i know when is the intake of UTM Part 2 this year?
I'm graduated from UM Part 1 in year 2013, and have been working in Singapore for 3 years, I would like to go back to finish my Part 2.
*
September intake is closed already. Next is february. U may start applying in sept. But be quick, it fills up quite fast.
TSazarimy
post Jul 30 2016, 05:20 PM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(akioen @ Jul 30 2016, 05:14 PM)
thank you. What are the main criteria they are looking for the Part 2 Candidate in UTM? As in the working experience aspect?
*
generally, working experience-wise, we're looking at diversity of projects involved, preferably at multiple levels. meaning u could be involved in housing, commercial and institutional. at the same time, u're involved during ideation process with the client, as technical designer, or site inspector. the more diverse ur portfolio, the better.

and if u can, show urself in leadership roles in the office. like managing a meeting alone. or was incharge in certain aspects in the practice (like in charge of working drawing production) and so on.

projects do not have to be big. what we're looking for is diversity and depth.
TSazarimy
post Aug 5 2016, 01:09 PM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(W2Y1123 @ Aug 5 2016, 12:32 PM)
Dear Mr.Aza,

I am a Part I architect which have been working in an architecture firm 2.5years, and now looking to further my studies for Master Architecture (Part II).

I am applying for USM, UPM and UKM. I know 3 of these Uni the Master Part II r not accredited by LAM, I wondering why since UKM have stated their Part II by Year 2005,  but they still can't get the accreditation by LAM Part II until now? While Taylor's just started the Part II on Year 2013, and now they got the accreditation by LAM. Could Mr.Aza enlighten me the problem? Thank You.
*
i'm not aware that UKM has been offering part 2 since 2005. let me check first.

i know UKM only recently started the part 2 masters programme, but they need to produce the 1st cohort before accreditation can take place. like taylor's, started 2013, produced 1st grad recently and immediately go for accreditation and got it. so i'm sure UKM would do the same too.

but like i said earlier, i'm not particularly certain about its previous part 2 programme.


TSazarimy
post Aug 8 2016, 01:44 AM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(W2Y1123 @ Aug 5 2016, 02:58 PM)
[attachmentid=7253700]

Mr.Aza, thanks for your replied. I am according to the UKM official website, the introduction of department of architecture. This is why i curious about their accreditation for part II.

By the way, is Mr.Aza know is there a min. students required to start a course? and any min. numbers of student required to call for accreditation from LAM during the final semester? TQ.
*
sorry for the late reply. been away for a while.

i did a check, and there was indeed several batches produced by UKM. however, the reason(s) why they didnt get LAM part 2 is unclear to me. but from what i understand, currently they're going for masters and try to go for that accreditation directly.

to qualify for accreditation, the school must at least produce a sizable cohort that would be statistically sound in order to determine that the programme offered meets the standard set. normally this would be around 15-20 graduating students. but we have seen a number as low as 8 students only. basically, if the number is to small, we cant be sure if the students were inherently good before they start or they became good because of the programme.

so at 15-20 students passing, they would be confident enough that it is not a fluke or statistical anomaly.
TSazarimy
post Aug 8 2016, 12:48 PM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(zackngbs @ Aug 8 2016, 12:28 PM)
Hi Mr. Azari, UPU result came out today at 12pm noon.
It gave me UTM- kejuruteraan awam which is my 2nd choice.
What can I do to maybe re-appeal to get my first choice UTM - architecture ?
*
try and check under UPU, there should be a rayuan button somewhere.

but at the moment, we have maxed out our architecture placements. so even if u merayu now, u wont get a placement unless somebody rejects our offer.
TSazarimy
post Aug 8 2016, 01:00 PM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(zackngbs @ Aug 8 2016, 12:56 PM)
Agak how long does it take to know whether rayuan success or not ?
*
usually about 1-2 weeks after the programme has begun. that's when we know who actually rejected our offers. then we will know how many people we should call for 2nd intake.

and bear in mind, the 2nd intake line-up is huge. just hope ur name is somewhere on top of that list.
TSazarimy
post Aug 8 2016, 07:14 PM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(Ivy Beh @ Aug 8 2016, 07:11 PM)
So happy to get in utm architecture course ... Can't wait for that
*
Congrats and welcome to hell.
TSazarimy
post Aug 9 2016, 12:29 AM

mister architect: the arrogant pr*ck
Group Icon
Elite
10,672 posts

Joined: Jul 2005
From: shah alam - skudai - shah alam


QUOTE(zackngbs @ Aug 8 2016, 11:15 PM)
Congrats ! Ivy Beh
Btw, Mr Azari. I think this year got new rule.
Those who get a place in Universiti Awam are not allowed to rayuan.
No hope anymore I guess ? :')
*
sorry, i think it's still the same. rayuan can only be done IF you didn't get any offers.

63 Pages « < 53 54 55 56 57 > » Top
 

Change to:
| Lo-Fi Version
0.0710sec    0.50    7 queries    GZIP Disabled
Time is now: 7th December 2025 - 09:51 PM