my expert bro, i'm newbie here n need recommendation to OC my tracer 4x1gb 800mhz with P5N32E-SLI n QX6700. minimum setting will do because never OC before. i tried oredi but cannot boot my vista la...................

my setting is in the tweaker extreme window, AI Overclock [AI OC] n SLI ready [CPUOC 1%]. is that all that i have to set?

should i follow this setting? but where to set the CPU OC?
AI Overclock: Manual
CPU Ratio: 8
FSB Strap: 333
FSB frequency: 400
PCI-E Frequency: 100
DRAM: DDR2 800MHz
Dram Command: 2
dram timing: Auto 5-5-5-18-3-42-6-3-3
Dram static Enabled
Transaction booster: Auto ( At 400fsb it will find the lowest.. so no worries)
CPU Voltage: 1.35
CPU PLL: 1.6
FSB Termination: 1.2/1.3 try both (until u can load into windows)
NB: 1.4v
Clockovercharging voltage: Disabled
Load line calibration (i think this is voltage dampener): Enabled
CPU GTL Voltage: 0.67
NB GLL Voltage Reference: Auto
Spread spectrum for both cpu and gpu disabled