Not available yet. The SRP is RM 779...some ppl think it is expensive...you interested?

I use TJ08-E. No interior setup picture I can provide for now. It's very good for MATX owner like me. Moreover I use PP05 short cable set to keep the cabling neat. Temperature wise, I'm happy with it. Since it's small the air cycle is fast enough, I own a Cosmos S with 3 120x120 intake fan. This casing is as good as that



This post has been edited by Vigilant: Dec 23 2011, 07:25 PM

thanks bro..now i can see hows small it is by compare it next to black widow i like this TJ08-E design...aluminium...

Keep 1 thing in mind though for future buyer for this casing, the RAM clearance is very minimal for tall heatsink due to the hard drive cage. I have 4 HDD installed, and the drives are already touching my Dominator heatsink. Vengeance is known not to fit in.

But you can have the HDD cage removed just in case

Still weighing the options available. Looking around for a SFF casing that can suit my needs.

The SRP of 779 is higher than the SG07, due to the thicker aluminium face plate? lol...

silverstone case fan.huhu

this is my simple raven 02 ----->

Ask and you shall receive!







My Force GT hiding in the mount.

Anyways, Its a really solid case. Since the outer part has been posted above, i decided to post the guts of this case. Yes it would fit 1 NH-D14 and the GTX580 perfectly. The only drawback is that, once you mount the NH-D14, you have to remove the HDD cage, and thus you can only mount 1 HDD and 1 SSD. Perfect for someone who don't have multiple HDDs.

Overall, I love this case and wouldn't be trading it for anything soon.

---

Added on December 25, 2011, 1:34 amOh yea, AVNGL is my nickname on another forum where this pictures were originally posted.

This post has been edited by kembar4: Dec 25 2011, 01:34 AM

Very nice. The spec is very good too. Great job.

yeah.very nice.good job boss

Thank you. Just a side note though for those who are interested to build a system like this.

With a Noctua NH-D14, once you insert a graphic card, such as the GTX 580, make sure to insulate the metal frames from the cooler as they might come into contact with the GPU.

When you want to remove the GPU, you're going to have a hard time. You have to remove the NH-D14 to get the GPU out.

Hi Arvin, where did you hide your SSD? What VGA is that? Or is it that GTX580? Anyway what's your spec?

This post has been edited by Vigilant: Dec 25 2011, 02:04 PM

and i think looks like factory reference GTX580

Hello. That was the Gtx580 that i sold you.

And the SSD is hidden at the bottom mount. Look up at my previous post and you'll see it. Its the one in Red.

Specs:

Asus Maximus IV Gene-z Gen3
i5 2500k @ 4.8GHz
Noctua NH-D14
2 x Kingston 4GB DDR3 Value Ram
2 x Kingston 4GB DDR3 Server RAM (ECC) --> Salvaged from my previous Server
Silverstone TJ08-E
Corsair GS700
Samsung F3 1TB HDD
Corsair Force GT 120GB
Leadtek Nvidia GTX580 3GB (Sold)

I see, I have a hair or something stuck inside the intake fan lol, I can hear a rattling noise but just a little, not loud at all. Kind of lazy to dismantle the case to clear it up.

BTW both of the front panel USB is 3.0 port right? I can't utilize that, my motherboard only have 2.0, I can't see any pins for the front panel USB.

This post has been edited by Vigilant: Dec 25 2011, 03:53 PM

Hmm.. About the hair, Whenever I remove my dust filter to clean it, and then once i put it back to its position, i would hear some sort of rattling sound for awhile. It would come randomly for a few minutes. Then it goes away. Happened for a few minutes. I have no idea what causes this but since it goes away after a few minutes, i don't want to fix something that isn't broken.

Front are usb 3.0. I think there is a mount included to enable usb 2.0 support for those whose mobo don't support the usb 3.0.

Mount? Does it come with the case? If that so, I'm going to check it later.

Yes it does.

See here



Source: http://www.pugetsystems.com/labs/articles/...tone-TJ08-E-101

its not a mount, its an adapter or u can say a converter

This post has been edited by iaknesnah: Dec 26 2011, 03:24 AM

omg..u even installed monstrous Noctua NH-D14 inside... salute to ur rig.
btw, u still can add one more exhaust fan at the rear...
great airflow then it will be.

Actually, i did that. I installed an Artic F12 PWM fan at the rear to act as an exhaust.

Works beautifully.

This post has been edited by kembar4: Dec 27 2011, 04:39 PM