never ever ever use wd40 on any rubber parts / materials especially on timing belts or accessory belts. it will deteriorate the material very fast. if needed, use only silicone based lubes as it is safe for use.

FYI, timing belt do not or ever makes any noises (be it squealing, "chit chit chit noises") in the morning like some forumer states in here. only accessory belts will make noises after some time. to solve it is very simple really and you dun even have to replace it just because it makes noises. either use silicone based lubes / spray OR rub some candle wax under the belt where it runs over the pulleys. kawtim.

Eh ur adams digital is amp ah.. i thought pre-amp only.. How much of difference between adams and rockford?
Ur adams amp is what model? I want to check out the specs a bit.
Haha.. Really want meh? Want to create a profile or just a group only?

ya..now i know the change gear at the correct rpm is very important..if i rev to 5.5k then change gear,sure i can overtake him ady..he oso wonder why his wira 1.6 manual will lose to my persona auto even the distance of me n him was quite far..v tried from 60-120,60-140 many times,if i'm in front,sure i can drag the distance of me n him,if i'm at bec,sure i can manage to keep cucuk him even he accelerate 1st..my fren who sat my car oso comment i can easily to chase my cousin car even my cousin accelerate 1st

i forgot to ask fren to record..hehe..but i'm happy since our persona even auto oso can beat wira 1.6 manual lo..hehe

No worries.. Service as long don't exceed 2k kms on first service can d.. But where u went lah 2 days 400 KMs? 

I'm thinking ur fuel pump got problem. Mine also the same thing. Gonna have it replaced tomorrow. Before this it was fine..
I'm checking on Hotbits tomorrow. Will let u know. Loan approved d?

My car's mods now:

1. Denso Iridium Spark Plugs
2. Simota Air Filter (But de-modded for a few days cos I'm claiming IAFM warranty tomorrow. Using stock filter now.)
3. Hotbits Extractor + 1 spiral bullet, 1 midbox muffler, stock tail pipe.
4. Front & Rear Rockford Fosgate Prime 6.5 inch 2-way speakers.
5. Rockford Fosgate Punch P400-2 2-Channel Amplifier.
6. Viper 2-Way Alarm with Tilt & Shock sensor.
7. 16" R3 Rims on 205/50/16 Yokohama S-Drive.

What's in my engine now:

1. Castrol Edge 5W-30, to be replaced with Caltex Havoline 10W-40 tomorrow.

What's in my boot now:

1. Rockford Fosgate Prime R300-4 4-Channel Amplifier (For Sale)
2. MA Audio Monoblock 2000 Watts Amplifier (For Sale)
3. Adam's Digital AD 100-4 TX 4-Channel Amplifier (For Sale)
4. Adam's Digital 5-Band Pre-Amp (For Sale)
5. Shell Helix Ultra 5W-40 (For Sale)
6. Henessy V.S.O.P. (For Emo Purposes only )

Total stuffs in my boot weighs over 30 KGs, not including spare tyre.
Here's the story:

Just now I was at Genting Klang, line clear so thought can test 0-100 KM/h time. Shifted to L, waited for traffic light to turn green. Then go. On first gear, I pushed the gear lever to 2 at around 5k RPM, but the car sticks to L/1st gear & pushed a little more till 6.2K RPM, I had to lift my foot off the gas pedal for a while before it changes to 2nd gear. On 2nd gear to 3rd gear perfect shift at 5.5k RPM. Real 0-100KM/h time not known, butt-dyno feels that it's around 9 seconds, or maybe even less. Air-cond was off.

Why I did this test? Because I raced with a Swift Sport on Duke today. Was on my way back from D'sara, entered Duke highway. Then this white Swift Sport tailed me from behind while approaching the corner into Duke. Ok lah, then I show him what Lotus handling is like lor. Bantai corner, he was left eating dust behind. Whenever he take a corner, his car almost always understeer into outer lane. Reaching Duke, 80-140 I had the kick, pick-up was fine. But 140 onwards he overtook me with ease. Probably due to the fact that his car is lighter & have higher stock HP than mine (125HP, comparable to CPS). And that Swift was modified, exhaust changed. Hotbits stuff, can see the black lining before the muffler tip. Not sure if he piggyback an aftermarket ECU. Knowing my car have less than 100 WHP, weighs around 300 KGs more & still can smoke a manual Swift Sport with at least 125 HP at 80-140 KM/h.

Have you ever seen a small car travelling at speeds around 160 KM/h? It's scary, I tell you. Duke highway is not exactly that smooth, his car bumps & jumps on high speed very badly. He definitely invested too much on performance but didn't spend a dime on handling.

Xandras ur rims is it like this one???

LoL.. It's around RM 2k for Rims only.

Piggyback ECU i might consider.. But not camshaft lah..

---

Added on March 9, 2011, 10:31 amProton mechanics taking a break now Like, LITERALLY!! All the mechanics are sitting behind me lol

=D Google is my FUBU. LOL!!

---

Added on March 9, 2011, 10:45 amInstall stroker kit. Make our 1.6 Campro become 1.8

ya lo..i think i onli can afford to use cap ayam brand 

470 for extrator, 2 bullets for auto.. rm150 per bullet.. rm250 for stainless steel full piping..
Come let me feel it.. hehe.. I want to feel the power. XD
470 extractor, auto 2bullet, manual 1 bullet, 1 bullet is rm150.. stainless steel piping rm250.. total 1020 for full set excluding muffler..

Makes sense. Still haven't tune my ecu tho. Sigh. Eh anywhere got recommendations to tune ecu n a/f ratio?

---

Added on March 11, 2011, 6:40 pm

Need ecu e manage d. I wan wei.. anywhere from 7-15 hp increase..

---

Added on March 11, 2011, 7:25 pmSeriously, I think I will go for ECU first if all goes well. Cos I prefer to have power over noise actually, & I'm worried that full hotbits set will be too noisy. Maybe piggyback an ECU first, then only see how.

---

Added on March 11, 2011, 7:35 pm

As required by sam.

Who say cannot use? LoL.. E-manage is pretty much universal wat.. Not sure about the price yet, will go discuss with the person tomorrow.

change extractor,drop in filter and iridium plug  then u will gain the low end pick up..

Yeah sure.. Start making one soon.. hehe..
rm100 for works engineering air filter, rm140 for spark plugs.
Ok sure.. XD I will add a list then u all start spamming me lah.. XD
Time for 4-2-1 and 2 bullet with s-flow muffler.. 

Hehehe.. One of the first batches of guinea pigs.. XD.

4-2-1 with nanas and 2 swilrl bullet (12inch followed by 8inch/6inch) and rear muffler box with s-flow muffler..  Either use back the 1.7inch ori piping or change with stainless steel lah.. Same diameter.

[attachmentid=2093334]
this thing only u can afford