hi all i wanna share something interesting that had happened

so this was what happened
i have a AMD athlon x2 7750BE + ECS A780-gma ultra and i tried to oc it just now but no got some not so good results with ACC set to auto and special ACC disabled
so i just decided to lower its vcore to 1.3 from the stock 1.3375 to get a better temp at stock speed and stress tested it with prime95 blend for around 30 mins
after i confirmed its max temp to be safe which is around <50C i restarted the pc
when it booted up i went and check my temp again with Speedfan and i found 4 cores shown
have a look at the screenies i took awhile ago

as u can see the vcore is 1.55 which is plenty high and the clock speed is lowered to 1.6ghz (multi x8)
i'm little worried as the temps are unreadable with the core unlocked while the vcore is that high

i wanna ask is there anyway i can read the temp of my cores
and also is there any way i can lower the vcore as u can see adjusting the vcore from AOD is futile

thx ya guys

This post has been edited by PhenomII: Feb 14 2011, 07:03 PM


Attached thumbnail(s)

ya its downclocked to 1.6ghz by default
actually this is the 2nd time this has happened to me
i experienced the same thing some time ago last year while fiddling with my AOD settings
but as soon as i restart the pc it returned back to x2 7750 kuma at 2.7ghz

also wanna ask is 1.55vcore safe for the processor?
i'm using a hyper 212 with push pull config using 2*44cfm fans
normally what kind of temperature does 1.55v yield for a 65nm core?

This post has been edited by PhenomII: Feb 15 2011, 01:10 AM