lolsss i also never expected so many ppl wan OCT...

both is OEM alarm system... just pick which u prefer...

carvox is also 2 way... Elton showed me the carvox alarm which it is previously known as RadioStar alarm.... Tenon alarm is inherited from 1st generation 2 way Wheels alarm system. Steelmate is an OEM alarm too but for the best quality i will choose steelmate

Now i am using Ori CrimeFighter not the imitation taiwan ones...

Get engine kosong or upgrade to 4G93 1.8 SOHC for waja.... there is a person selling the engine with installation for RM2xxx..... better do that rather than spending on the damage engine.... i think u hit and jammed the oil squitter....

if you cant start at the 1st place means something big problem edi....... you can troubleshoot the car on ur own if you have basic technical knowledge.

below is the contact of the guy who sell the engine... it seems that he had only 1 unit left

4G93 SOHC 16 Valve
Multi-Point Injection (MPI)
Total Displacement - 1834cc
Bore - 81.0mm
Stroke - 89.0mm
Compression Ratio - 9.5:1
Maximum Output - 86 kW (117 PS; 115 bhp) @ 5,500 rpm
Maximum Torque - 161 N·m (119 ft·lbf) @ 4,500 rpm

source : http://en.wikipedia.org/wiki/Mitsubishi_4G9_engine







maxis-2375631

Elton says he get ur order edi mahhhh

duplicate post

This post has been edited by mxsteven: Feb 5 2011, 02:12 PM

oil pump return path....

No idea... but what he mention that he hitted something that punchered the oil filter is something serious.... the oil sump below the car is very sensitive... if u hitted something below the oil sump... the return oil squitter might jammed or u might hit the oil sump filter netting loose and run into the crankcase and damage the whole engine.... oil squitter tends to jam or clogged up if the person never take care of the oil or like to change the oil grade too frequent...

plausible

---

Added on February 5, 2011, 6:40 pmoverhaul workmanship is about 1k..... not including parts so prepare 2k at least

This post has been edited by mxsteven: Feb 5 2011, 06:40 PM

i agree.... thats what i told Elton

Auto oil 20k but try to change at 10k or 6 month... timing belt 100k but recommended to replace at 60-80k or 1 year

dun tell me while u remove the cat con the person damage ur o2 sensor

TD04L also had 2 type of bearing.... Ball Bearing and Journal Bearing. Ball bearing would spool faster but create lower HP output compare to the same size of the turbine using Journal Bearing. Fast spooling dosent mean good for any setup.

_______________________________________________
Mitsubishi TD04HL-16T with a 218/60 wastegate, these cars use the same turbines but diffrent compressors to be able to increase the power from 240 -250 hp without exceeding the maximum rpm on the turbo. You´r talking about the increas of powewr in the LPT engines, why they only can increase the power up to approximatrly 230 hp is that the turbo is too small"


(the following come from mitsubishi web site!!!!)
"organization output(ps)22-100
amount of exaust(cc) 1.500cc
highest rotation speed(rpm) 200000
highest temp of gas(centigrade) 200,000
maximum compression ratio 2.4"

" The TD04hl family is probably comparable to the Garrett T28"(garrett T28 can produce up to 630 cfm ans is good of 350-375 hp range)

"The latest development involves higher technology internal parts that increase the efficiency range of the turbos. One such development is the ball bearing center cartridge. Ball bearing center cartridges spool up faster and are able to spin to higher rpm without overheating. . The TD04HL series by Mitsubishi is fitted to some late model Saabs and is also a higher efficiency range turbo that can spin to much higher rpm than an ordinary TD04H. I assume it has some sort of ball bearing center section".

source "superhonda.com"

---

Added on February 7, 2011, 8:56 amsomething not correct hahaha T-28 630CFM hmmmmmm let me check lols

---

Added on February 7, 2011, 8:59 amFound....

T28 is 31lbs/min...... so roughly 448.632cfm

---

Added on February 7, 2011, 9:06 amsome goodies for everyone http://www.ztechz.net/id1.html

This post has been edited by mxsteven: Feb 7 2011, 09:06 AM

afraid that they damage the o2 sensor by overheating while doing the weld job. There is no other reason for makan minyak xcept o2 failed and goes to open loop mode.

better save up the money for something better

owh.... then better dun mod.... save up to get another car lols

---

Added on February 7, 2011, 2:27 pmNope my side mirror can fold as well hahahaha my side mirror also got heater one leh

---

Added on February 7, 2011, 2:40 pmwhy cannot install? i dont see any problem there!!! AFC 5 button is same with SAFC and NEO wiring... the only different is

SAFC = 16 afr setting - monochrome
NEO = 16 afr setting + VTEC capable - colour
AFC 5 butang = 5 afr setting + no colour at all hahahaha

This post has been edited by mxsteven: Feb 7 2011, 02:40 PM

alif currently have only 2 button hahahahaha

colour ade... casing n wire colour lah hahahaha

---

Added on February 7, 2011, 4:03 pmyea green red.... can change the led to blue n white hahahaha

This post has been edited by mxsteven: Feb 7 2011, 04:03 PM

orangcina hahaha... mine is pecah edi 1 lols