Jul 29 2011, 12:49 PM
QUOTE(yngwie @ Jul 29 2011, 07:50 AM)
estimate price according to market price sometime early of this year.
if you want to change front and rear altogether, it will cost around 2k or so.
and you will only saved about 38 bucks or so on re-alignment cost.
here is an estimate breakdown for the rear ;
2x2 = 4pcs suspension link( short and long) - 100 bucks x2 = 200
rear absorber x rubber protector - 180x2 = 360
rear suspension arm - 1xx bucks x 2 = 2xx
rear arb linkage x 2 - 65x2 = 130
labour around 150 bucks or so.
and since you're working on suspension changes, why not change the arb bushes
in a go? check with elton for a good arb pu bushes for more 'responsive handling feel.
i don't know which area you're staying, how could i recommend a workshop?
200 bucks is an estimate price for both side. its not an original proton but will last for another 5 years or so.
good thing you get rid of the noisy sound when driving over those thick yellow lines.
i don't suggest changing the bushes alone on old lower arm. those worn out arm bearing can't be swapped.
new proton ori cost in the region of 2xx bucks for a pair. not sure if there is a different between abs and non-abs thou.
Im ard Kota damansara and ss2 area...I dun mind travel abit far if the workshop is good and cheap...Must change absorber for all 4?as I just change last year man.... if you want to change front and rear altogether, it will cost around 2k or so.
and you will only saved about 38 bucks or so on re-alignment cost.
here is an estimate breakdown for the rear ;
2x2 = 4pcs suspension link( short and long) - 100 bucks x2 = 200
rear absorber x rubber protector - 180x2 = 360
rear suspension arm - 1xx bucks x 2 = 2xx
rear arb linkage x 2 - 65x2 = 130
labour around 150 bucks or so.
and since you're working on suspension changes, why not change the arb bushes
in a go? check with elton for a good arb pu bushes for more 'responsive handling feel.
i don't know which area you're staying, how could i recommend a workshop?
200 bucks is an estimate price for both side. its not an original proton but will last for another 5 years or so.
good thing you get rid of the noisy sound when driving over those thick yellow lines.
i don't suggest changing the bushes alone on old lower arm. those worn out arm bearing can't be swapped.
new proton ori cost in the region of 2xx bucks for a pair. not sure if there is a different between abs and non-abs thou.
This post has been edited by brewoe_1988: Jul 29 2011, 12:55 PM
Quote
0.0307sec
0.59
6 queries
GZIP Disabled