Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 LYN Proton Saga/Iswara Drivers' Forum! V23, The first Proton car in production

views
     
chypp
post May 9 2011, 02:12 PM

Getting Started
**
Junior Member
67 posts

Joined: Aug 2005


Hi Sifus. Need help here on my 2003 iswara. The problem relates to handling.

It started recently when i drive from penang to KL. The best way to describe the problem maybe: the handling feels weird, response when cornering not like normal car. It is most obivious when driving above 90kmh and overtaking a car; feels like the car is out of control. Feels like slow response from steering, or an oversteer. What is the most probable reason?

few infos:
1) The steering had been changed to power steering in 2008. Was good back then, only minor leaking.
2) The abs are rojak. Front is std lmst (gas), rear is std iswara (oil).. or the opposite. I cant remember. Same with the coils.
3) Alignment is OK. Checked with a trusty alignment workshop. The shop did check a bit, and said the rear axel is not ok. I saw the rubber seal have oil leakage. But the shop didnt seem confident, and said cant do it that day coz got 2 cars overhaul. Repair cost almost RM300 btw.

So based on the infos, what is possible problem? What should i check so that i wont waste money repairing unrelated issue(s)?

Any trusty workshop to recommend area puchong/kajang/serdang/bangi? Might want to change clutch, and maybe some tuning also at the same time. If all OK and still got extra budget, might interested to performance upgrade to improve comfort/safety (no idea yet).

Thanks a bunch.

This post has been edited by chypp: May 9 2011, 02:13 PM
chypp
post May 10 2011, 11:40 AM

Getting Started
**
Junior Member
67 posts

Joined: Aug 2005


QUOTE(the_catacombs @ May 10 2011, 06:56 AM)
check all 4 tyres for correct tyre pressure... check if all 4 tyres got thread or not...
check front and rear absorber see if they are working or dead (damaged/leaking)...
check wheel alignment as well as camber setting...
check front lower arm bushing and rear trailing arm bushing....
hmmm.. most stuff relating to tyre/alignment already check. as for trailing arm, i saw the middle part (which got some rubber) is oily and kinda damaged. To repair, what item should i replace? found something relate to "rear axle kit", should i ask for it at shop? Last time the shop said need to replace "rear axle" (whoa!) so im a bit skeptical..

will feedback later. thanks ya.

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0480sec    0.82    7 queries    GZIP Disabled
Time is now: 13th December 2025 - 10:57 AM