Theres headlamp cleaner to polish it from yellowish to clear . But the yellowish will come back after a while ( i know because i polish till bored already ) . Better change new headlamps ( Thats what i did ) . If you wan cheap you can find Arbin in forum i bought mine Rm 220 for a pair in February this year .

This post has been edited by Peekab0o: May 19 2011, 01:31 PM

I can't find ur post
whr is the link?

---

Added on May 19, 2011, 1:48 pmcant find

This post has been edited by heavenly91: May 19 2011, 01:48 PM

Here .

Do the problems re-occur after u change it?

This post has been edited by Lowenkreuz: May 19 2011, 02:06 PM

So far so good haven turn yellowish because the RM 220 / pair is plastic also not glass . Planning to get Osram Nightbreaker got some UV protection wont make our " plastic " yellowish . Halogen bulbs are hot especially for our plastic cover headlamps 60w long term they tend to turn yellowish . Thats why you dont see glass headlamps turn yellow .

[quote=Peekab0o,May 19 2011, 02:17 PM]
Do the problems re-occur after u change it?

[/quote]
So far so good haven turn yellowish because the RM 220 / pair is plastic also not glass . Planning to get Osram Nightbreaker got some UV protection wont make our " plastic " yellowish . Halogen bulbs are hot especially for our plastic cover headlamps 60w long term they tend to turn yellowish . Thats why you dont see glass headlamps turn yellow .

[/quote]
get glasss 1
it outside turn yellow
becuse factory come got spray 1 layer dunno what ?
can sent to porfesiional polish it out
we diy polish useing diy liquid the chemical just melt the layer of protection
they polish use buffer and sandpaper so will last longer

S.A seksyen bape rozz? Ok gak tu.. Pm pon number pls. Huhu

saya tolong jawab
depat kilang proton

aiyo I mean I want to cabut the whole thing.

in the PROTON factory or nearby the factory? huhu

nearby only

any difference between the two types of LMST headlamps?
I mean the chrome one which comes wiht the 07 model, or the grey one that comes with my 04 model.
I think they solve the problem with the 07 model right?

Instaled K&N.....only Little Improvement maybe due to the hot weather.....doesn't encounter the 'shhhhhh' sound that Peekaboo Mentioned

Then maybe my filter dirty liao gg ady .


@Lowenkrunz : Yes i think 07 model they used glass never seen any 07 model turn yellow so far grey inside is the previous smoked version i prefer the 07 one chrome looks nicer .

Ur extractor and mid bullet got change? K&N alone will not gain tat much, juz car felt lighter and better response..'shhh' sound? more like 'vroom' sound..try run 100km above..

mid bullet change for what purpose?....no not going to change extractor.....Stock extractor and mid bullet no good?

But my car is the n-line LMST wo, the silver one. isnt chrome on silver is abit glittery overkill? what u think? cuz i cnt imagine it...

mid bullet mainly for silencer/better air flow, I took the straight flow mid bullet for better air flow compare to the stock..for me, stock not vry good. after changing it better pick up and speed..

---

Added on May 19, 2011, 8:10 pmPicture search on google


All sifu, how to adjust Auto Choke RPM? So far I have tighthen the blue circle screw cuz my morning start rpm at 200, Is it the correct screw for it? should I tighthen the red color screw too?

This post has been edited by EnochKeng: May 19 2011, 08:14 PM

tighten the blue screw if u want to adjust the autochoke. turn around few times ok already. it will only works once the engine is cold. so if you adjusted it wrong, need to readjust and then check it back on the next day.

whats the red one for?