Wassup.
I am back for some modding.
After a month of using my modified ICE.
The sound is still sux because the stupid back speaker is Proton Clarion 4 inch speaker.
The sound will crack if the music too much bass.
Here comes me to change the fate of my ICE =D

Bye bye old speaker.

hi there beautiful haha xD
RM 60 bought imitation from tunersandtoy shop at ara damansara (who cares about ori or fake sound abt the same)

do wiring. cut the current wire and make it lonnger by adding another wire. easy job.

notice I have elongated the wire and used duct tape to seal it.
the wood panel I made a hole on it.

tada.
cantik le?
hehe
at first I tot want ask ppl install for me but I du lan cause he say want cut my metal piece that support the wood.
So I ownself DIY lo.
Quite easy to do.
Luckily I do myself.
If you guys need to fix it urself can ask me first how to do it.
I will post here to help u hehe ^^

This post has been edited by heavenly91: Apr 3 2011, 05:36 PM

yesterday wangan let FD2 tapau...

but i didnt full throttle laa... he was pulling away at 180kmh.... my car swaying heavily at 170kmh due to worn steering bush (i think)... or mayb alignment lari liao after peksan bukit putus...

Bro,did you remove the metal and install it on the wood?or u made new supporting wood for it?

U won't go wrong with this tires. Unless driver problem hahahahahaa....

interested on how to relocate the supporting metal bar...

hi everyone. could someone explain to me the most
suitable setup for adjusting the tapet?
4g15 engine with 275 degree cam jasma.
sounds a bit noisy nowadays.. planning to send
my car to mech for tapet adjustment.
i highly appreciate your concern..
thx~

zaini, i might go for ATR sport la if i change to 16 inch.....

Good question you got there.
Well as you can see, the speaker is too big that it will definitely overlap the metal supporter right?

(Overlapping adi)
I don't believe the assemblyman cause he talk crap want remove the metal and say later the wood might fall off cz no more supporter so ask me buy another wood?
It is just a gimmick so that we have to buy another wood from them that costs RM50? WTF.

Actually we can remove the metal supporter with pliers.
But first you have to open up the cloth that covers the wood.
After that use the screwdriver to cungkil the dead bolt to remove the whole thing.
After removing the metal supporter, start drilling and makes holes for your speaker.
As you can see there is a line stain that shows the previous location of my metal supporter.

Once you done with the hole and making sure the speaker is in place, take out the speaker and put back the metal supporter with screw and nut.
Get from DIY shop la.

Tada. I refit the thing.
Remember you have to drill another hole to fit it.
Overall DIY yourself is better

Yes, confirm. I always belasah my car higher than these speeds.
Always notice 4k @ 140kmh.

besss wor..... bukit putus... the road nice ah?

Thanks for the info and pic bro

guys.. i have a saga n i would like to repair my cushion.. u guys know where to repair?
or where can i get a 2nd hand cushion that are almost the same as my original 1? i only need front driver seat.
or u guys know where i can get the full cushion cover? cheap 1 will do. would love to repaint my car also.
btw, my car is saga 92 1.5 auto. thanks.

emm... 5gear@4000rpm = 140kmj... mine only 130kmj.. what wrong huh...? sifu2 also dont give any feedback yet... quiet je huh..

buy recaro sports seat
paint job?
I think hor u can check at the automotive garage forum there.
Type search la.
Sure can find forur car d;)

---

Added on April 4, 2011, 10:24 pmwelcome:)
hmmm now i duno wat to mod liao

This post has been edited by heavenly91: Apr 4 2011, 10:28 PM

[quote=heavenly91,Apr 4 2011, 10:23 PM]
buy recaro sports seat
paint job?
I think hor u can check at the automotive garage forum there.
Type search la.
Sure can find forur car d;)

T.T
recaro sports seat is exp la.. juz looking for the same replacement..
no other option??
will search it.. thanks..

noisy in what way ???
tat tat sound or noisy lumpy cam
what kind of visous oil rating u using ????

---

Added on April 4, 2011, 11:40 pmcan but u have no cushion to use when u sent it for repair
they take ur seat kasi buang all the old sponge and the cloth
then they use back ur ori frame and kasi restore it back la
if normal cloth change is around 70 to 100 for 1 seat
ask around cushion repair shop
or if u want get go halfcut shop get ae111 , fto , gen 2 seat and kasi mod

---

Added on April 4, 2011, 11:43 pmcarb out of tune , plug old liaw , distridutor not in great shape , bla bla bla
my 1.3 can hit 140 very easily but 1.5 although higher cc but find it difficult to so it because the 1.3 carb are servise and retune by the previous forman

This post has been edited by sinister_sid: Apr 4 2011, 11:43 PM

my car can go 120km/h 5th gear @ 3.5k rpm .. this level engine noisy d.. huhuhu

change better oil , change gb oil then very stim 1 after that
no more sound

oh... ic ic.. any recommendation?? and price of coz..

[quote=chicky86,Apr 4 2011, 11:02 PM]
[quote=heavenly91,Apr 4 2011, 10:23 PM]
buy recaro sports seat
paint job?
I think hor u can check at the automotive garage forum there.
Type search la.
Sure can find forur car d;)

T.T
recaro sports seat is exp la.. juz looking for the same replacement..
no other option??
will search it.. thanks..

[/quote]

Try search mudah as I did saw someone wanted to sell the proton saga seat.

http://www.mudah.my/Seat+proton+saga+iswara-9200764.htm