for now im not going anywhere far..
myb just go around shah alam only..
really busy with work.. got a lot of things to do..

now already back to normal..
myb its because of weak battery..
i just check.. the water just left little..
later wanna refill back..

---

Added on March 3, 2011, 2:35 ambut.. lately.. when i press my throttle.. revving..
got asap hitam keluar from my exhaust..
is it the carbon right? is it normal?

This post has been edited by budakmentah: Mar 3 2011, 02:35 AM

my filter is new.. just around 1 month.. and also i just done topset.. clean my block and carb..
other possible?

already ask my friend.. he said that carbon is normal..

all moped bike using this brand for disk brake system..

dun try y-teq.. im using it.. but no more.. later wanna take out use lining brake much better

the problem with y teq is on its master pump and its brake caliper..
maybe u can find ori master.. replace with ori.. about the calliper.. im not so sure..
sometimes when use.. the calliper not cengkam the disk.. brake not so makan..

that the price..
even if u buy at thai there..
the price range is around rm1800-rm2000..

the material is the same if im not wrong..
but the set of its handle is the different from lc..
new meter, new handle. that why.. peoples said..
x1r if u use to play corner.. much syiok.. can lean until hit jalan

never heard ppl use 3.5 on rear..
so far the biggest i know.. people use tzm/fz

use 2.5 also already enough..
120/70 may fit nicely..

just play with ur sprocket and carb..
u cant have both top n pickup.. u had to sacrifice either pickup or top..
if u want stable.. just use stock size of sprocket.. 15-39..
but change ur chain to 415.. or just buy sss 415 sprocket..

for carb.. u try find a good foremen that pro in setting carb..

---

Added on March 9, 2011, 12:31 pmya meh? use 110@100/70 already good..
can cecah lutut..

---

Added on March 9, 2011, 12:35 pm I MUST CHOOSE MAXXIS!


This post has been edited by budakmentah: Mar 9 2011, 12:35 PM

already change to superbike..
then give me ur 60mm block!

---

Added on March 9, 2011, 11:34 pmwat tyre u use?
metzler?

This post has been edited by budakmentah: Mar 9 2011, 11:34 PM

Info Spoket

Heres a table of sprocket combination for reference.
the stock gear ratio is 2.6(in bold)
15 39 = 2.6 Stock gear ratio

---------------------------------------------------------------------------------------------------------

The (color green) gear ratio are high speed sprocket combination.
16 35 = 2.19
16 36 = 2.25
16 37 = 2.31
15 35 = 2.33
16 38 = 2.38
15 36 = 2.4
16 39 = 2.44
15 37 = 2.47
16 40 = 2.5
14 35 = 2.5
15 38 = 2.53
16 41 = 2.56
14 36 = 2.57

---------------------------------------------------------------------------------------------------------
so if you want more top speed than stock settings
use 14t front and 36t rear
or 16t front and 41t rear
---------------------------------------------------------------------------------------------------------

The (color red) are low speed sprocket combination.
16 42 = 2.63
14 37 = 2.64
15 40 = 2.67
16 43 = 2.69
14 38 = 2.71
15 41 = 2.73
16 44 = 2.75
14 39 = 2.79
15 42 = 2.8
16 45 = 2.81
14 40 = 2.86
15 43 = 2.87
16 46 = 2.88
14 41 = 2.93
15 44 = 2.93
15 45 = 3
14 42 = 3
15 46 = 3.07
14 43 = 3.07
14 44 = 3.14
14 45 = 3.21
14 46 = 3.29

---------------------------------------------------------------------------------------------------------
the higher the gear ratio the more low speed. (good acceleration, less speed)
---------------------------------------------------------------------------------------------------------
the lower the gear ratio, the more high speed (top speed, less acceleration)
---------------------------------------------------------------------------------------------------------
BIGGER TIRES (100/80 and up): use color red
SMALLER TIRES (80/80 and below): use color gree

This post has been edited by budakmentah: Mar 10 2011, 09:56 AM

green is the upper size.. which mean the one below (green)
while red is the lower size.. below (red)

for standart engine..
u can consider ur sprocket size based on the word that i BOLD

wanna change ur monoshock?
ur standart mono still in good condition right?
if u wanna change.. then give me ur standart mono..
wanna change back to standart mono..
currently im using yss 7 step..
but im not much like it.. because a bit higher than standrt..

This post has been edited by budakmentah: Mar 10 2011, 11:58 AM

u already lowered ur standart mono?

---

Added on March 10, 2011, 12:39 pmim afraid i cant followed u guys..
already so busy lately..
got a lot of work to do.

This post has been edited by budakmentah: Mar 10 2011, 12:39 PM

yup.. most of shop that i went.. at sek 7 is most cheap i found.
u know where is UiTM shah alam?

x1r also rm700-800? wtf..
last time i survey for single x1r around rm280-350..

i buy ori x1r (not single) is rm400 include install.. thats 2yrs ago.. now the price if im not wrong is around rm360..
then if ori single x1r around 300+..

the link u that u post previous page is reliable..
recorn.. i know him.. he is supplier for my club sticker..