Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
14 Pages « < 3 4 5 6 7 > » Bottom

Outline · [ Standard ] · Linear+

 ▐▐ ★HTC Desire Official Thread V8 ★▐▐, -3rd&4th Posts Updated With Tips&Themes-

views
     
tyja
post Jan 24 2011, 02:28 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(netken @ Jan 24 2011, 02:17 PM)
its double the size of our standard battery ... i normally take about 1 hour plus on plug in - not USB.

i bought from a fellow bro here .. i think lebih kurang rm300.00

http://www.tracyandmatt.co.uk/blogs/media/...over-fits_2.jpg

it closes nicer than the above pic though - but the back cover pin i broke it .. sigh..
*
its look like a TANK!..
if the pic was not there, i still can imagine how big it is.
psp also like that. psp slip vs psp phat.
tyja
post Jan 24 2011, 03:36 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



i dont know whether somebody already use this application, but it seem not work for my surround wifi.

penetrate

This post has been edited by tyja: Jan 24 2011, 03:39 PM
tyja
post Jan 24 2011, 03:44 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



anybody on miui that using n1table move dalvik cache to cache partition?
what is balance cache did you have after all application been restore?
tyja
post Jan 24 2011, 04:02 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



one more thing, anybody know application that i can use to photo as widget?


Added on January 24, 2011, 4:15 pmjust try muiu to compare power usage, it seem miui is good on battery consumption

This post has been edited by tyja: Jan 24 2011, 04:15 PM
tyja
post Jan 24 2011, 04:28 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(djlah @ Jan 24 2011, 04:22 PM)
got, I'm...
checking the balance cache for you, 1sec...
how about your device on Latest CM7 Nightly?
how to compare or check power usage?
*
balance cache on cm7 = 50mb.
balance cache on miui = 5mb.

power usage - base on battery monitor widget
cm7 draw much current while on screen. so far miui much less than cm7

djlah,
you on n1table, but you didnt move dalvik cache to cache parttion. you dalvik move to either sd or data partition.
if you are using class 6 card and above, you are good to move to sd. but for people like me who use class 2, move dalvik to sd is not recommended.

This post has been edited by tyja: Jan 24 2011, 04:34 PM
tyja
post Jan 24 2011, 04:37 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(djlah @ Jan 24 2011, 04:32 PM)
are you trying miui now? why your balance cache only left 5mb?
*
yes, because im tired to charge.. tongue.gif
becuase i active cachepart to cache partition. otherwise my cache partition will be waste like that
unlike cm7, rom will automatic detect cache partition more that 60mb, dalvik will be moved to cache partition.
dalvik size is around 40-50mb, and after restore all application, my cache partition will still left 50mb.
maybe dark tremor script still have a problem.

This post has been edited by tyja: Jan 24 2011, 04:38 PM
tyja
post Jan 24 2011, 04:47 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(djlah @ Jan 24 2011, 04:44 PM)
oh, ya. forgot that.
firstly install the rom, I'm using move dalvik cache to cache partition
but while restoring app, found that still not enough.
as you said, higher class sd, good to move. so I just move dalvik caache to sd.
which version of dark tremor script?
mine is 2.7.5.2.
maybe you can try firecat if ur dark tremor still have problem.
*
im using 2.7.5.3 beta 2. i think i just stick my dalvik at data partition.
most of none use application already removed. left the precious one only.
tyja
post Jan 24 2011, 05:00 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(djlah @ Jan 24 2011, 04:57 PM)
Battery Monitor Widget, look good with the graph display, gonna try it.
thx for sharing...
which version of MIUI u installed?
*
mate,
latest latest one 1.1.22 r1. miui-au.com
tyja
post Jan 24 2011, 06:10 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(ShinnKQ @ Jan 24 2011, 05:56 PM)
dvd can? :[ I no CD..sighhhh~~!@~
*
yes you can.
even you want to use dvd blue ray also can.
just burn what cd you have.


Added on January 24, 2011, 6:11 pm
QUOTE(djlah @ Jan 24 2011, 05:06 PM)
I saw several issue report on 1.1.21 and fix on 1.1.22.
is everything working fine on 1.1.22 now?
I still at 1.1.14. if 1.1.22 are stable and less issue, gonna ready flash it soon....
*
so far no problem.
but i notice photo frame widget do not work


This post has been edited by tyja: Jan 24 2011, 06:11 PM
tyja
post Jan 25 2011, 08:10 AM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(pandazhun @ Jan 25 2011, 12:45 AM)
hrm....how to partition via recovery then? - go to partition option under advanced mode. if i can remember on cwm.i'm using amon ra
how do i know my nandroid is working? - you need to restore the nandroid if want to know whether it is good or not

Added on January 25, 2011, 12:48 amafter load leedroid 2.3d and reboot now, my phone lag at the leedroid start up screen....... tak boleh pakai la...... - how long?lee droid usually takes time on first boot


Added on January 25, 2011, 12:51 amnw should I choose use sense or laucher pro and my home screen is so different now, not so used to it
phone low in memory after load the rom. - there's many launcer out there. try all.

Added on January 25, 2011, 12:57 amhavent really noted the major advantage of using leedroid and mayb gotta spend more time to find out..
go to sleep 1st as spend a lot time doing this.....
thx pals.
*
refer to my blue reply.

This post has been edited by tyja: Jan 25 2011, 08:10 AM
tyja
post Jan 25 2011, 10:55 AM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(pandazhun @ Jan 25 2011, 10:50 AM)
I press volme down + power , then choose rcovery then choose advance, but didn't see partition sd....how how?
*
you on what cwm version?
tyja
post Jan 25 2011, 02:17 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



guys, what the most widget you like?
one people one widget...no tiru tiru or copy copy eh..

tyja
post Jan 25 2011, 02:25 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



lai lai, come come...others..

tyja
post Jan 25 2011, 02:31 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(hazril @ Jan 25 2011, 02:27 PM)
how to post only one...i got many i laik u noe... biggrin.gif
*
ok ok..
you may post as many as you like..BUT
put a reason why

example

current widget - to monitor current as widget.
LPP - now have screen transition.
tyja
post Jan 25 2011, 02:43 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(kokifung @ Jan 25 2011, 02:38 PM)
Hmm.. swap 0 then ext2, ext2 to 3.. ext3 to 4.
Swap 0 Ext 2, Ext 2 to 3..
Then swap 0 , Ext 2 ??

Correct?
*
swap always 0, depend on you whether want ext 3 or 4
by default amon ra partition to ext 2.

This post has been edited by tyja: Jan 25 2011, 02:44 PM
tyja
post Jan 25 2011, 02:46 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(phgmail @ Jan 25 2011, 02:44 PM)
power widget..
if i use ROM that dont have notification power widget..

hazril,
u post about swype to screen off before.
how to use it?
i dont understand and tried but didnt work..
*
as i understand swype work if you use normal english. if got market language, it didn't recognize. maybe need to dload language library and learn from sms.
tyja
post Jan 25 2011, 02:59 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(hazril @ Jan 25 2011, 02:49 PM)
you need to cover the light sensor...the fastest is 1 second...you need to run the app and do some settings to it...
he was refering to the app i posted a few pages back...the proximity sensor screen off thingy... biggrin.gif
*
yeke.. then i read wrongly la..
haha
tyja
post Jan 25 2011, 04:05 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(phgmail @ Jan 25 2011, 03:28 PM)
Tyja,
this is after i flashed cm7 and install app.
why my system is very low? Is my sd-ext not working?
i install kali-'s script.
*
the latest legacy or previous data2sd?

paste your output here. run command on adb

adb shell df -h | grep /dev/block/mmcblk0p2

edit : if you using data2sd

after flash on recovery, run on terminal

e2label /dev/block/mmcblk0p2 sd-ext

both need to run after flash gapps.


This post has been edited by tyja: Jan 25 2011, 04:12 PM
tyja
post Jan 25 2011, 04:19 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(djlah @ Jan 25 2011, 04:13 PM)
ya, it's true. slower when hot are normal.
what I found for my device is, the most heat area is my sd card. surprising battery not that hot.
realize that there is really different on the speed of the class. my class 10 is more hot than my previous class 4 and class 2.
it's happen only when huge number of app restoring non-stop. 
hey,
anymore widget sharing from everyone?
*
yeah, still waiting liow..
tyja
post Jan 25 2011, 04:41 PM

-I Just Want To Share-
*****
Senior Member
913 posts

Joined: Dec 2008
From: Nusa Indah, Johor Bahru



QUOTE(phgmail @ Jan 25 2011, 04:26 PM)
dev/block/mmcblk0p2    458.1M      8.0M    425.6M  2% /sd-ext

Only 2% of my sd ext is used.it is mean my app still in system?
i used latest legacy on cwm 3.
my step flash rom,gapps and legacy.
i thought a2sd is working cause is it displayed in quick info..
*
do you know why kali ask to partition using cw3?
it is because cwm3 will put label sd-ext on ext partition.
if before this you partition using other recovery or tool, you need to manually add label onto ext partition
try run below on terminal

e2label /dev/block/mmcblk0p2 sd-ext

then check again

adb shell df -h | grep /dev/block/mmcblk0p2

if got output as below.

Filesystem Size Used Available Use% Mounted on
/dev/block/mmcblk0p2 751.9M 146.9M 566.8M 21% /sd-ext
/dev/block/mmcblk0p2 751.9M 146.9M 566.8M 21% /data/app
/dev/block/mmcblk0p2 751.9M 146.9M 566.8M 21% /data/app-private

meaning you are good to go. uninstall all application and try restore a few application first. check whether application a2sd being reduce

if doesnt work, just use firerat. firerat still a legend script.

http://forum.cyanogenmod.com/topic/2636-fr...-issues-i-hope/




14 Pages « < 3 4 5 6 7 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0437sec    0.33    7 queries    GZIP Disabled
Time is now: 9th December 2025 - 05:47 AM