Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 NDSL Calibration Problem, im sry if this the worng place to ask..

views
     
TSazshahmi
post Jan 14 2011, 10:38 AM, updated 15y ago

Getting Started
**
Junior Member
77 posts

Joined: Dec 2009



hi.

the calibration is runn of around 3mm, anything that small or smaller will not hit it ( must be 4mm or biger can hit it )
so did some googleing i found that the prob is due to dust stuck at the side? is it true?
or the touch screen alrdy "F" up? i alrdy try to recalibrateing still its the same...

so now im trying to fix my self if possible notworthy.gif

This post has been edited by azshahmi: Jan 20 2011, 08:22 PM
Pr1me_Minister
post Jan 14 2011, 12:13 PM

Casual
Group Icon
Staff
314 posts

Joined: Feb 2006
Try using a small brush to clean the sides of the screen, dusts may get stuck in there and messes up with the calibration.
TSazshahmi
post Jan 14 2011, 02:32 PM

Getting Started
**
Junior Member
77 posts

Joined: Dec 2009



QUOTE(Pr1me_Minister @ Jan 14 2011, 12:13 PM)
Try using a small brush to clean the sides of the screen, dusts may get stuck in there and messes up with the calibration.
*
ya jz now try that. i even use abit water hopefuly the dust will stick to it guess im wrong..
im pretty sure it is dust problem .. if i see useing bare eyes cant rly see the dust but when im useing torch light
i can see the dust is filled shakehead.gif ( right side only, left side pretty clean and yes the calibration run off right side! )
i do some more googleing some pple use toothbrush =.="
is there any other way? i dont want to broke it apart sweat.gif
hteekay
post Jan 17 2011, 11:47 AM

Getting Started
**
Junior Member
66 posts

Joined: Jan 2011
I guess if after you clean off the dust and yet the calibration still doesn't work, then you have a faulty touch screen there my friend. Not much more you can do about except to bring it to the shop and hope that they can fix it for you.
I'm not accusing of anyone or any shop but from my experience of buying game consoles and handphones in KL especially in Sungei Wang shopping mall has been a dissapointing one.
especially the one NDSL i bought which has a custom casing. The box is not an original box and they have a ugly manual inside.. and the console turns off by itself whenever it feel like it. I brought it to the shop to fix it until my warranty expired and yet they still can't fix it. sad.gif
PS. don't buy NDS with the custom casing one.. unless you are sure that it is an official custom casing from nintendo.
Oh and I think the R4 "original" that you got from them is not an "original".The original R4 has stopped producing the flash cart years ago and all the R4 sold here is a clone.. go to GBAtemp to look for a better R4 clone..


TSazshahmi
post Jan 20 2011, 01:22 PM

Getting Started
**
Junior Member
77 posts

Joined: Dec 2009



QUOTE(hteekay @ Jan 17 2011, 11:47 AM)
I guess if after you clean off the dust and yet the calibration still doesn't work, then you have a faulty touch screen there my friend. Not much more you can do about except to bring it to the shop and hope that they can fix it for you.
I'm not accusing of anyone or any shop but from my experience of buying game consoles and handphones in KL especially in Sungei Wang shopping mall has been a dissapointing one.
especially the one NDSL i bought which has a custom casing. The box is not an original box and they have a ugly manual inside.. and the console turns off by itself whenever it feel like it. I brought it to the shop to fix it until my warranty expired and yet they still can't fix it. sad.gif
PS. don't buy NDS with the custom casing one.. unless you are sure that it is an official custom casing from nintendo.
Oh and I think the R4 "original" that you got from them is not an "original".The original R4 has stopped producing the flash cart years ago and all the R4 sold here is a clone.. go to GBAtemp to look for a better R4 clone..
*
hmm im pretty sure it can be done if send it to shop they will open it and clean it from the inside..
if the touch screen faulty i can buy it off eBay only RM10 XD~!! but only my concern like u say.. if i sent it to shop i scare someting else broke whistling.gif .. and about the R4 im pretty sure its original ( or myb 1:1 clone? ) bcoz i can use latest firmware ( Woods V1.22 ) and i dload it from gbatemp website not woods for clone tongue.gif

» Click to show Spoiler - click again to hide... «


 

Change to:
| Lo-Fi Version
0.0193sec    0.25    5 queries    GZIP Disabled
Time is now: 5th December 2025 - 09:32 PM