You have to send to them and show them the problem, you can't order first then change unless you realy want to pay for it, for warranty claim you must always let the service center to check and let them order the parts. If they can't solve the proble try to visit orther better reputation service center.

HI

mind to share ur no1. problem how u know it was came from ECU? i'm facing the sound when the rpm drop at the zone 2500 to 1500, sound like airoplane engine slow down, but when i increase pass the 1500 to 2500 rpm zone it was no sound.

For the no2. problem i also face the same thing but when i chack my self the power steering hose are very tight and firm can't even try to shake by hand and it already got some rubber insulation at all the bracket and touching area, don't know after chnage to rubber hose assembly the sound is still there or not.

Burning smell also same like mine one I thing this is because the rush proofing material spry around the extractor under the car got heaten up becaus i notice when raining time the smell is gone, My sis Myvi also have the same smell during the car still new but now the smell is gone.

Wiper tik tik sound same like mine PE this is the sound of the timer relay to energise the wiper motor because it was in the intermitten on off thas whay we notice the sound, if we turn it to normal and fast there are no need to usr the timer relay to energise the wiper motor.

Yik, yik sound hanppen to me after i first time to bring down the back seat, when my car was new and i never bring down the back seat i got no this problem.

my driver side skirting at front eadge get peel out can see the double side tape.

lol... but i'm doub the wiring and fuse rating could be under size for the HID fog lamp.

My persona WUQ lagi old loh it only just over 2600km now got WUW hai...
the ori metal no. plate is use double side tape to fix, only the plate holder use screw to fix, if they use the double side tape with black colour sponge it will be ok.

---

Added on February 4, 2011, 11:29 pmcheck the eagleeye website it cost RM600 !

---

Added on February 4, 2011, 11:41 pmwhich edar you collect ur PE? the tinit is it Rihno or RONO ?

This post has been edited by ngeo88: Feb 4 2011, 11:41 PM

My PE got is now over 2600km and into 2nd month start getting those common proble like sound from right engine compartment when conering on unevent surface, back seat "yik yik" sound, beside of that problem as below:

1. When my car on moving and accelerate it over 3000rpm then release the throtter rpm start drop till 2500 and will hear "EEEeee..." sound like plane engine slown down but when the rpm decrese below 1800 the sound will gone, i try to stop the car and shift to N and rev the engine it dosn't have the sound, what is the problem? changing belt will help ?

2. I expiriance one time when i shift to R position and press on break the engine will shake and can hear a scary shaking sound from front eingine, i try shift to D and go fwd and stop to N and shift back to R go back ward and press break the sound came back, then i stop the engine for 1 min. try start it again the proble still the same. Then i let it over night till next morning all the problem gone ! anyone face this problem before ? what is the problem ?

3. I got "tik tik" sound from the dashboard look like behind the meter cluster when my car in moving every time i accelerate the "tik" sound like relay will came out, the sound just one "tik" every time i accelerate the car, i try to stop the car at N and rev engine it is no "tik" sound.




This post has been edited by ngeo88: Feb 5 2011, 12:20 AM

timing belt ? is it the cranking pully belt or the cam pully belt ?

This post has been edited by ngeo88: Feb 7 2011, 04:18 AM

Check this out PE at 210KM/h @ 5100rpm, did any one try this before?

http://www.youtube.com/watch?v=QSp1oUcyeU0&feature=related



[/quote]

---

Added on February 7, 2011, 4:20 amwhich sc u go, already booking?

This post has been edited by ngeo88: Feb 7 2011, 04:20 AM

That is auto cruse ON indicating, when it turn green it meanse auto cruse in control.

are u manual? my auto till now also 8.8L/100km very hard to 7.9L/100km i travel 80% highway 20 % normal, i had try use auto cruse at 90km/h only can reach 7.5L/100km very boring to drive car at the speed of 90km/h on highway.

I notice that every time i press hard the average will go higer very fast but it will very slove to get the reading lower a bit but nomether how long time you take it will never go back to the reading before you press hard is it normal ?
exp: 8.5 then i press the accelerator hard and it will jump up the reading to 8.9, after some distance i stick it to 90km/h it will drop to 8.7, but foreever it will stick it at 8.7 or higer it will never go down below 8.7 unless i reset it and let it count a gain

---

Added on February 9, 2011, 6:57 pmwhat is the antibac treament ? how many km you service ? look cheap ma

---

Added on February 9, 2011, 7:02 pmHow about the stainless steel filter it just look like the pic but without the blue colour fiber filter is that kind of filter good ?

Any one try oo using the Qmax nano air and nano fuel ? was it ok can save fuel ?

This post has been edited by ngeo88: Feb 9 2011, 07:02 PM

Tik-tik sound, Yik-yik sound, Knock-knock sound go away......

Booking Puchong SC on 9/2 tell them got complain need to check the car, appointment 10/2 9:00. Yesterday 8:55a.m. arrive lot of ppl already there for waiting, all Proton SC staff report to work, 5 SA, 1 cashier, 1 reception, 1 tea lady, serve at customer waiting area but don't know how many mechanic, also up stair still got some people working, tell the SA i got the tik-tik sound when accelerate and the knocking sound when corner on uneven road, they wrote down and estimate 2hrs to finish, SA with me got to car for checking the item in car and write down the meter reading, all the SA look friendly 2 of the SA was the young malay lady.

The waiting area are clouded and only with 42 inch LCD tv, find a place sit down the tea lady will come and ask you tea or coffee or milo, their service head report to work 9:30a.m. all the work shop full of car and all the SA busy checking their customer's car none of them sitting at their place only the cashier and tea lady at the waiting area to serve customer, tea lady always come to ask customer want some more drink, don't know how many cup of tea i had drink. Around 10:30a.m. 5 Chinese mechanics reported in SC one of then the shirt written COSE Body shop, they come together with some spare parts, i guess they must send from COSE to backup the branches.

Around 11:00a.m. the reception come and ask those waiting customer car number plate so she will go to work shop to follow up the status and come back report to the customer with estimated finish time(this is good) . Walk down the workshop all the mechanic are busy including those just arrive from COSE. Finally my car finish at 11:45a.m. at that time i guest sure they will tell me they need to order the parts to replace the steel hose and so on, but surprisingly the service report written the hose assembly has been changed and the tik-tik sound due to the loosen fuel line bracket and it has been tighten back, although the job has taken more that the estimated 2 hrs but all the problem settle and no need to go second time is reasonable for me, overall I can said the Puchong SC are good, the only thing to comment are the waiting area too small, no WiFi and no canteen like COSE, anyway i visit again for next service.

not sure, but i see lot ppl use syntium 800 and bring back the free gift don't know what is the free gift it is in the box 7inch. (H) X 6inch.(W) X 6inch.(D); there are promotion now for FALKEN tyer i see the banner written 4 pcs tyer only RM115, again don't know what size lah.... coz i no need to change tyer now.

What is the meaning of the 2 red arrow ? i had try to take out the 2 screw but still cannnot take out the aircond panel. any screw hidden in the control knob ? and how to reach these screw? I need to change the amber illuminate LED to white clolour this is the remaining parts that still in amber colour in my car except the radio lah.

where is the place

is the SC branches or authorise service center ? how come my price and yours is difference exp: the sundries and drain plug gasket, if service at branches is it no need to paid for sundries ? attached my 1k service bill at authorised SC.

[attachmentid=2039052]

[attachmentid=2039233]
this is the fuel line bracket, if not tightening when accelerate will have tik-tik sound due to knoking the fire wall body.
[attachmentid=2039238]
warp this latch will elaminate the back seat yik-yik sound.
[attachmentid=2039239]
These is the power steerling fluid return hose after changing to rubber house, original is aluminium pipe when conering it will hit the body and create knock- knock sound.
[attachmentid=2039248]
service report stated what has been done.

This post has been edited by ngeo88: Feb 12 2011, 06:00 PM

i'm at Puchong but going to sleep soon now is 3:00am !

---

Added on February 13, 2011, 3:07 amif not mistaken u refer to the new Vios right...

This post has been edited by ngeo88: Feb 13 2011, 03:07 AM

umzaisiami, wah if got over 20 ppl bulk buy how you gonna send courier also not cheap lah.. any way estimate how much leh.

did ur invoice stated upgrade ECU ?

Update ECU standrad procedure at COSE ? how about others braches is it standrad as well ?

---

Added on February 14, 2011, 7:04 pmMe also on Rhinepro but dono what model of tint , original safetint still in so total 2 layer liao..

This post has been edited by ngeo88: Feb 14 2011, 07:04 PM