Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 -+♦+- LYN PROTON PERSONA CLUB V11 in 2011 -+♦+-,, A venue for Persona owners and fans

views
     
forumyen
post Jan 17 2011, 05:53 PM

New Member
*
Junior Member
26 posts

Joined: Sep 2010
Hi All,
I am new here, i book a persona Bline AT,
suppose i ask the SA to buy the number plate 8X8X, but today the SA call me and told me that the admin of his office dunno that i wan buy number plate,,and the admin already register my car with number 4917,,,,
To me 4917 is a not very good number,,,,so is it possible to ask the SA to change the number plate back to 8X8X?

Such a bad experience for buying a first car sad.gif

update,,,
the SA called me and told me either they change the number 8X8X for me ( the fee rm800 will bear by them,)
OR
they give me rm800 and take the number 4197 ....
forumyen
post Jan 17 2011, 08:18 PM

New Member
*
Junior Member
26 posts

Joined: Sep 2010
Went to the sa there, suppose the car is ready now, so I juz ask them to change back the number pplate I wan...so need them to go to Jpj then need a few day to process..
I think the insurance policy also need to change cause the policy is written with wuu4917....
Hope can get my car next few days smile.gif

@@ btw, manage to look at the car , got a bit scratch on the roof, they say it's the treler when transporting the car the tree branches scratch it,,,so I juz ask them to make sure it can be polish and when I get the car iq dun wan those scratches...

Haha,,,first time buy car already already like this,,nightmare!,,
forumyen
post Feb 1 2011, 01:25 PM

New Member
*
Junior Member
26 posts

Joined: Sep 2010
-Hi all, finally get my car last week saturday....persona bline black....
maybe its old stock gua...got a few scratches,,,everywhere. hood,front bonet and side...
-So far, the car is ok but have the knocking sound when turning on uneven road,,,need to change the power steering assembly rite?
-now waiting for 1k service then onli can test the performance smile.gif.
-Wonder is there any good shop to do polishing and wax for the scracthes..
-Black color really hard to maintain,,,,sikit sikit see so dirty,,,,,then scratches also so visible.....
-So far still ok for the car,,,juz my eyes too good, can see the scratches if near to it..
-Plan to do tinting, the SA give the voucher for tinting brand "RONO" , nvr heard b4, for full car around rm500,,,of coz the cheapest one,,,but wonder it will block the heat or not, cause i usually no go out on afternoon, but on weekend go shopping will suffer lar,,,cause last week trap in jam n under a very very hot sun,,,till headache..
forumyen
post Feb 1 2011, 05:18 PM

New Member
*
Junior Member
26 posts

Joined: Sep 2010
QUOTE(scattygirl @ Feb 1 2011, 03:52 PM)
I just finish doing tinted on my car RM550 with 10 yrs warranty.
Side and back:
VLT = 55%
UVR = 99%
IHR = 68%
Tickness = 5mil

Front:
VLT = 57%
UVR = 99%
IHR = 75%
Tickness = 5mil

Looks like I do a bit expensive worr....you only do RM450...and all 75%....
*
Hmmm,,,,IHR stand for wat ar?

i juz need a film which reject heat well,,
i know most of the shop will tell u this IRR is how many %, n so on,.
but i search in the internet, they say TSER is the main point to reject heat, this is due to IRR has many type of way to calculate it, so its not so accurate.
TSER is a more accurate way to calculate heat rejecttion.
smile.gif i m no pro, plz correct me if i m wrong.
BTW did any one of u that use tint film which is:
1-less than rm500 or better still less than rm400 biggrin.gif
2- good heat rejecttion
3-compliant with JPJ (side more than 50% and front more than 70%)

its because feedback from owner is the most valuable answer compare to the specification written on the brochure smile.gif
forumyen
post Feb 1 2011, 05:56 PM

New Member
*
Junior Member
26 posts

Joined: Sep 2010
QUOTE(ZenGTMM @ Feb 1 2011, 05:34 PM)
Hmmm.. Okok also the pay.. Better than my current intern job.  tongue.gif
As long as its near enough my house then ok lah.. Im staying in bukit jalil ady.. Not sure how far it is from cyber..
IHR is Infrared Head reduction.. Same meaning as IRR =infrared reduction.
TSER is Total solar energy reflected..
Solar energy consist of heat, light and UV blah blah blah.. To make sure the car is cool, u want to remove heat.. Heat energy is 95% transferred through infrared wave to u.. Thats y the IRR/IHR is the most important factor...
Example A:
VLT 50%
IRR 68%
UV 99%
TSER 20%
Color: reflective black

Example B: (My car)
VLT 20%
IRR 75%
UV 99%
TSER 15%
Color: deep black/ non reflective/ non glossy black (like my car).

By right u will think expA is better cos TSER higher, but then u must know that its TSER is higher cos its results is boosted by the reflective film which reflects light energy also.. Visible light energy plays a minimal factor in reducing heat transfer..Therefore the higher the IRR the better it is.. Thats y higher IRR films are moer expensive..
I can feel the heat is very much lesser eventhough im driving in KL.. My other car in JB IRR 52% only.. And it feels like there is barely any noticeable difference.. Still feel very hot..
*
Icic,
but TSER is not the LAST result of heat rejected calculated after add in the IRR,VLT and the reflective?

but hard to look for those tint IRR more than 70% in less than RM400...
Did anyone of u using high IRR tint with low price which included then front screen. cause some shoop say irr is lets say 75%, but its for side n rear window, the fron one they give u cheap cheap tine with low IRR.
anyone recommendation?

This post has been edited by forumyen: Feb 1 2011, 05:59 PM
forumyen
post Feb 6 2011, 01:19 AM

New Member
*
Junior Member
26 posts

Joined: Sep 2010
QUOTE(ngeo88 @ Feb 4 2011, 11:27 PM)
My persona WUQ lagi old loh it only just over 2600km now got WUW hai...  sad.gif
the ori metal no. plate is use double side tape to fix, only the plate holder use screw to fix, if they use the double side tape with black colour sponge it will be ok.  nod.gif


Added on February 4, 2011, 11:29 pm

check the eagleeye website it cost RM600  sweat.gif !


Added on February 4, 2011, 11:41 pm
which edar you collect ur PE? the tinit is it Rihno or RONO ?
*

The tint is rono..
After drove for 2 weeks found out,,
1- knocking sound when turning..
2- yesterday my driver lock does not come up or down when click on the key button..others door working fine...
3- hmmm,,this is a bit hard to say, I drove up to genting first work, park the car, then after 9 hours I go back kl, when going back , in the genting first world parking from b3 all the way down to b9 to exit,
I could hear some metal sound at my left side wheel (the sound is some sharp metal knocking) WHEN I brake n turn left at the same time (u know lar when u going down to the lower leve such like b3 to b4 l u have to turn right to the max n brake becoz first world parking is a bit tight)

Currently is juz this 3 main problem, others minor sound such as aircon rattling I juz leave it first cause it juz cum n go..

So now my car mileage is 1400 km ,,still haven't done my 1k service sad.gif becoz balk kampung n the proton service no open,, so I had to wait Monday to service my car,,,i have a few concern,,
1- is there any good service center that is nearby ss2 which can fix my problem mention n service my car?scared they dun have spare part for the door lock,,
2- how long will it take to service my car, cause I no take any leave,,,,,
3- may I service my car on Saturday? But the mileage will be around,,,,1.7k,,,I scared they will void my warranty cause I do the 1k service on 1.7k,,,,

Thanks in advance smile.gif
2-
forumyen
post Feb 7 2011, 12:04 PM

New Member
*
Junior Member
26 posts

Joined: Sep 2010
Today went to the sc in ss13 pj to service my car.
Reach there at 9am.
Pass the reception the service booklet and the 1k free service voucher.
Waited 1 hour and my booklet is still in the reception table waiting for the service advisor to pick it then key into the system.
The service in ss13 seem so bad.Wait till 10 am,,then at 10am saw a few technician go out yumcha.
Then I just go to the reception , take back my service booklet then drive the car away.
I just wasted 1 hour there just to wait for them to key iin my service request into the system, and its still not key in.
I then drive to another service center at sea park. pass the booklet to them, then the supervisor took by booklet and the technician direct service for me. not even 30 min....all "kau tim " smile.gif

Now looking for good tint below rm400.
is RONO tint a good brand? cause i got a voucher from the SA.
forumyen
post Feb 9 2011, 12:03 AM

New Member
*
Junior Member
26 posts

Joined: Sep 2010
I when braking also go sound when on straight road. Sound like small metal sound.
Seem like more problem coming into the repair list.
1- metal knocking when turning
2- braking got some small sound
3- car seem sluggish, but sum time it won't, maybe it's becoz different petrol.
4- alignment is straight, but the steering is not so straight
Maybe wait for 5k service then repair all together. Or can we go anytime?

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0475sec    0.56    7 queries    GZIP Disabled
Time is now: 5th December 2025 - 07:51 AM