can teach me step by step ?
thank you !
Sandy Bridge Overclocking V1, 2500K/2600K/2700K | LGA1155 P67.Z68.Z77
|
|
 Jul 9 2012, 08:48 PM
Return to original view | Post
#1
|
 
Junior Member
107 posts Joined: Nov 2009 
|
can someone teach me how to overclock my CPU
can teach me step by step ? thank you ! |
Quote|
|
|
|
|
Jul 10 2012, 02:58 AM
Return to original view | Post
#2
|
|
Junior Member
107 posts Joined: Nov 2009
|
QUOTE(owikh84 @ Jul 9 2012, 10:35 PM) Then you should let us know what's your PC specs. i gone through all it.. but still dont understand ohh there are some OC guides in the post #1 so you should go through it.   CPU: Intel Core i5 2500k MOBO: ASUS P8Z68-V LX COOLER: V6GT with TX-2 Thermal Compound RAM: 8 GB Kingston (4GBx2) GPU: Palit GTX 550 Ti (1024MB GDDR5) STORAGE: Western Digital 500GB Black OPTICAL DRIVE: Samsung DVD PSU: eXtreme Power Plus 550W Cooler Master CASE: CM Strom Enforcer |
|
|
Jul 10 2012, 02:11 PM
Return to original view | Post
#3
|
|
Junior Member
107 posts Joined: Nov 2009
|
QUOTE(CyntrixTech @ Jul 10 2012, 03:42 AM) 4.6ghz is probably the best your cooler can do. Your PSU is really bad btw. Most info can be found online. If you just want a cheat sheet, this should work for you. The V-LX bios should be quite similar to the M. thanks ! but before i do the tweaks, how to detect that the cpu running on stable condition ? what's are the ' symptoms ' that cpu running on unstable mode ? , can damage the cpu ? and regarding temperature, what temperature should i aware after i overclocked it ?http://www.facebook.com/media/set/?set=a.3...67942523&type=3 and yeah i liked already your page on facebook !   This post has been edited by zain_azmira94: Jul 10 2012, 02:12 PM |
|
|
Jul 12 2012, 12:08 AM
Return to original view | Post
#4
|
|
Junior Member
107 posts Joined: Nov 2009
|
QUOTE(unequalteck @ Jul 11 2012, 10:36 PM) BSOD will happen if insufficient vcore, it wont damage the cpu if the temperature don over 90C maybe? i see.. meaning after i overclocked my cpu then my temp is <90 consider stable right ? |
|
|
Jul 12 2012, 01:14 AM
Return to original view | Post
#5
|
|
Junior Member
107 posts Joined: Nov 2009
|
QUOTE(unequalteck @ Jul 12 2012, 12:16 AM) ya, but not directly check the temp after adjust the multiplier, run prime95 blend test for 12/24 hours and monitor the temperature will try what CyntrixTech recommend me the settings, and will run prime95.. will state the what's the result after done with it.. but right now, have to clean inside the rig, found out that the cooler is full of dust ... thank you so much !  |
|
Topic ClosedOptions
|
| Change to: |  0.1839sec
 0.86
 7 queries
 GZIP Disabled
Time is now: 10th December 2025 - 07:30 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.