Sandy Bridge Overclocking V1, 2500K/2600K/2700K | LGA1155 P67.Z68.Z77
|
|
 May 21 2011, 01:13 PM
Return to original view | Post
#1
|
 
Junior Member
152 posts Joined: Jun 2007 From: Perak 
|
Hi guys,
How does this looks to you? Is it healthy? or maybe i can fine tune something for better result/stability? » Click to show Spoiler - click again to hide... « CPU is running 4.5Ghz @ 1.336v load 1.344v idle.. all others on auto Ambient temp inside case is 35C (as displayed by fan controller) Cooler config using air from inside case to blow out through radiator Planning to use this 24/7 Need advice Thanks This post has been edited by wandzul: May 21 2011, 01:14 PM |
|
|
|
|
|
May 27 2011, 03:35 PM
Return to original view | Post
#2
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
Is this safe for everyday use?
p/s: ambient temp inside case was 35C at that time  This post has been edited by wandzul: May 27 2011, 03:45 PM Attached thumbnail(s) 
|
|
|
May 27 2011, 04:58 PM
Return to original view | Post
#3
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
QUOTE(amy89 @ May 27 2011, 04:35 PM) Try running linX longer and see got any error plus do you really need it overclocked all the time because if you are just surfing the net just use the stock settings much stable and your hardware is not always stress up.You can save in your bios a few clock settings.So you can save a few of your OC settings and stock settings so if you want to use it just load it.Your temp is considered ok if you are using stock cooler or maybe entry level air cooler.But is fun OC'ing but just do it safe.Hehe Thanks for the reply ---------------------Got gambar Kahwin on desktop....Not bujang anymore  -------------------- are 20 loops not enough?  stock cooler?  im using modded H50, that temp was after i tested linX with AVX (SP1).. before SP1, load temp was like 67ish with 35C ambient inside case..p/s: yes not bujang anymore, expecting new member in family in couple months  This post has been edited by wandzul: May 27 2011, 04:59 PM |
|
|
May 27 2011, 07:08 PM
Return to original view | Post
#4
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
QUOTE(OC4/3 @ May 27 2011, 06:07 PM) Seem like good enough to me as long as no random crash experienced is it worth it? a 16C & 0.64++ vcore jump over from 4.0ghzbtw, what does residual means anyway? :noob: need advice.. thanks  This post has been edited by wandzul: May 27 2011, 07:10 PM |
|
|
May 28 2011, 02:12 AM
Return to original view | Post
#5
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
QUOTE(amy89 @ May 28 2011, 01:14 AM) I have read in some forum and watch a few vid in youtube showing H50/H70 does not perform that great because they say the liquid temp inside need to reach a certain temp before it can release heat with the radiator.Unlike cooper heatpipe cooler that release heat at any temp and cool down faster.My first time running linX I ran for 50mnt because this is my only pc so cannot run long.But I ever ran linX for 8Hour two times...huhu 16hours might be true, but in my experience stock h50 performs similar to megahalem.. furthermore, im using a modded h50, using distilled water with additional 240 rad..  How boring that time but luckily no last minute error. however im settling down for 4.0ghz.. load temp is around 61C @ 31.6C ambient @ ~108GFlops.. passed 100 loops so far no prob thanks for ur advice UPDATE: been searching the net and found out that linpack with AVX @ 4.5ghz does really produce 80ish temp though.. so i think my proc & h50 are doing okay This post has been edited by wandzul: May 28 2011, 02:23 AM |
|
|
May 28 2011, 07:32 PM
Return to original view | Post
#6
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
QUOTE(lichyetan @ May 28 2011, 05:11 PM) when come to this questions, its always depends on personal preference. I dont know whether my proc is normal or not, but the vcore configs are like:Performance ? Noise ? and Power Consumption.... Some prefer silent + lower power consumption Some prefer performance to the max... For me, I take the middle band by tweaking to the optimum balance between them.  1.344v for 4.5ghz =additional 0.048v for 300mhz inc 1.296v for 4.2ghz =additional 0.102 v for 200mhz inc 1.192v for 4.0ghz =additional 0.194v for 700mhz inc ~0.98v for 3.3ghz thats why i stopped at 4.0ghz.. 1.344 vcore seems a bit high for 24/7 use.. BTW, my proc can pass 100 loops of linX if i lower the vcore for another 1-2 step but strangely the GFlop drops from 108+ to 79+..  which value should i go for? can somebody enlighten me?This post has been edited by wandzul: May 28 2011, 07:33 PM |
|
|
|
|
|
Jul 16 2011, 07:07 PM
Return to original view | Post
#7
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
QUOTE(DesktopLimousine @ Jul 16 2011, 05:31 PM) so, batch is nothing? only the cpu luck is worth? its YOUR luck |
|
|
Jul 18 2011, 12:23 AM
Return to original view | Post
#8
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
QUOTE(lat_lonelyboyz @ Jul 17 2011, 02:39 AM) so can i know how's ur 'luck' is going on ur cpu bro? no luck with mine.. saw some people hit 4.8GHz i5 2500K with 1.42v at 1.40 vcore 4.8ghz, it goes BSOD b4 booting into windows.. so i guess that's the highest vcore i would try, no more further as i dont dare to do so.. now settling with 4.5ghz 1.33vcore, load temp 74c with LinX + SP1 non-A/C room.. running on modded H50 block+pump with 360 rad.. This post has been edited by wandzul: Jul 18 2011, 12:26 AM |
|
|
Jul 27 2011, 02:08 AM
Return to original view | Post
#9
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
QUOTE(DesktopLimousine @ Jul 26 2011, 10:48 PM) latest OC result by me, i7 2600k @ 5.0Ghz, 1.4V nice temp!TEMP result: Without Prime95, 36c~45c With Prime95, 65c~76c » Click to show Spoiler - click again to hide... « Is it safe to run at 76c for gaming only? not really 24/7 have u tried LinX with SP1? |
|
|
Jul 27 2011, 02:57 PM
Return to original view | Post
#10
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
QUOTE(DesktopLimousine @ Jul 27 2011, 02:48 PM) i got something to ask, why my 2600k cpu temp getting high at low voltage? i read some tests concluding that (forgot from which site):i've tried running 4.5Ghz @ 1.35V and get 27-34 celcius at idle and 4.5Ghz @ 1.25V the temp is 32-40 celcius at idle... but, most of people said that the low voltage u got will freeze the temp.. more vcore = more heat also more frequency = more heat p/s: 27c idle, so u're in an a/c room? |
|
|
Jul 30 2011, 12:14 AM
Return to original view | Post
#11
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
QUOTE(DesktopLimousine @ Jul 30 2011, 12:03 AM) what is LINX? and how to test it? btw, which one is more good, Linx or Prime95? i prefer LinX (as per link on 1st page) with Win7 updated to SP1  if u happen to test it, please post the result here.. |
|
|
Jul 30 2011, 07:49 PM
Return to original view | Post
#12
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
QUOTE(DesktopLimousine @ Jul 30 2011, 01:10 AM) which problem size and memory(mib) i should choose for the testing? i'll just choose max available memory after disconnecting from network and closed most tray resident programs.. |
|
|
Aug 3 2011, 08:41 PM
Return to original view | Post
#13
|
|
Junior Member
152 posts Joined: Jun 2007 From: Perak
|
QUOTE(DesktopLimousine @ Aug 3 2011, 07:07 PM) thanks for the reply, check post #1.. and before that, be sure to update your win7 into Service Pack 1what is the latest Linx? can give me link plz? |
|
Topic ClosedOptions
|
| Change to: |  0.0472sec
 0.55
 7 queries
 GZIP Disabled
Time is now: 7th December 2025 - 07:08 PM |
Quote
