Just a quick test on Corsair Vengeance 8GB Memory Kit (CMZ8GX3M2A1600C8). Should have run 32M or Hyper Pi at least, haih, really no time. lol. But don't worry, dinos22 (Team.AU OverClocker) managed to stabilized it with 1.68vdimm, 1.25qpi/vtt iirc. Search around xtremesystems.org

Testbed:
CPU: I7 2600K Sandy Bridge
Mainbiard: MSI P67A-GD65
Memory: Corsair Vengeance 4GB x 2 CMZ8GX3M2A1600C8
VDIMM: 1.68v, rated 1.5v
CPU IO/VTT: 1.23v


DDR2133 - 9-11-9-27, rated DDR1600 8-8-8-24
Product Link: Click Here!!

New weapons arrived 

[attachmentid=2018267]

Best i can get my ram to go atm ; ;

[attachmentid=2021708]

The guys here post their numbers like it's a freaking holy grail for processor.

No it's not. These things comes with some issues with the SATA2 ports.

I'm not too sure of the full detail but apparently SB and it's P67 mobos generate too much errors on the SATA2 ports. This results in a shorter lifespan of your HDD and CDROM if you connect them to SATA2.

THe only solution for this? Connect them to SATA3, which is what I've done.

Intel is collecting all the motherboards back on April though.

Finally open the box, sexy beast..

Performance and overclocking wise still unknown yet.

Fatality is under which manufacturer ?

it's too plain on the SB side of story .
anyway, will give it a try on monday .
might be able to finally build up my system today or tomorrow after 3 months of delay T_T
powdercoating and all are finishing .
hehe

haha
well i had to .
no choice .
problems and many celebrations going on .
shop closing, dispute case and all .
had to wait man .

now its finished but d fella doing my casing is now sick .
can't come to deliver the items T_T

Not a very exciting feature i have to say 

re-run on BIOS 1090... 

@kakicam

im on bloomsfield .
SB is my fren's rig .
he asked me to build it up and clock it up ^^,