i have try to run folding for 5 mins n its good with 4.8Ghz , 1st n 2nd try it get BSOD coz of not enough vcore . 5 mins stress is enough to try out or need longer time ?
Sandy Bridge Overclocking V1, 2500K/2600K/2700K | LGA1155 P67.Z68.Z77
|
|
 May 19 2011, 10:12 PM
Return to original view | Post
#1
|
 
Junior Member
19 posts Joined: Mar 2008  
|
i have try to run folding for 5 mins n its good with 4.8Ghz , 1st n 2nd try it get BSOD coz of not enough vcore . 5 mins stress is enough to try out or need longer time ? |
Quote|
|
|
|
|
May 19 2011, 11:26 PM
Return to original view | Post
#2
|
|
Junior Member
19 posts Joined: Mar 2008
|
QUOTE(clawhammer @ May 19 2011, 10:46 PM) That's not bad but my Hyper 212+ with 2 x F12 push/pull is no where near 80C when I was doing 4.8Ghz with my previous i5 chip im using cooler master V6GT only , maybe i will try again to reach 5.0 ghz when im free .  |
|
|
May 20 2011, 10:42 PM
Return to original view | Post
#3
|
|
Junior Member
19 posts Joined: Mar 2008
|
i don think so for sandy bridge .. coz currently im running on 48x multiplier n my ram i was set to 1333 MHz .
btw , need to run how long or how many prime95 test to test the stability ? |
|
|
May 21 2011, 03:21 AM
Return to original view | Post
#4
|
|
Junior Member
19 posts Joined: Mar 2008
|
QUOTE(clawhammer @ May 21 2011, 02:01 AM) These are synthetic load tests which differs from our daily real world usage. If you pass Prime95, you might fail LinX (or vice versa) these days. What I normally do is just run an hour or two then start playing games, etc. If it doesn't crash or blue screen, you're good to go. What matters is the usability of the PC daily, not cranking up the Vcore just to satisfy an 8 hour Prime test ah ic .. which mean if i run folding 6 hours or more w/o bsod or auto shut down , then shud be good to go rite ? It's still a good tool to test because by doing an hour or two, chances of failing is a lot lesser.btw claw u already get ur 2nd gtx570 ? This post has been edited by babyblur: May 21 2011, 03:23 AM |
|
|
May 21 2011, 09:57 AM
Return to original view | Post
#5
|
|
Junior Member
19 posts Joined: Mar 2008
|
QUOTE(clawhammer @ May 21 2011, 03:59 AM) Yes, if you can fold and game then it's sufficient. Sometimes you can do all your daily task without problems at a lower Vcore but when you prime, it might fail. Prime is good as a tool to check for instability but no point pumping up voltages just to get it passed for long hours oo ic .. this is not good , my 2nd card stay at 55'c w/o air cond , soon i will get wc kit from u as im funding for it now ^^I'm on 580 SLI now and I have the same problem. One of the cards doesn't downclock, lol. I guess it's the driver or hardware like you said  my Dragon Age 2 doesn't improve even with SLI. Some driver crap problem and I'm still finding out.@ashraful as i remember some1 said b4 here , we hardly feel the different on daily usage for 1333 , 1600 or 2133 mhz . u only will see different in benchmarking . |
|
|
May 22 2011, 08:26 PM
Return to original view | Post
#6
|
|
Junior Member
19 posts Joined: Mar 2008
|
QUOTE(jokermerah @ May 21 2011, 01:56 PM) hi all OC sifu out there. can help me to oc my rig? this is my 1st time want to try oc. can anyone teach me how to oc? u can just increase the multiplier to max 46x with all auto setting @ 1.35 vcore , this is as my previous setting with asus maximux extreme . so i guess its the same with asrock . my rig : i5 2500k asrock p67 extreme 4 Msi gtx560 ti twin frozer silverstone strider essential 700 watts noctua nh 12p kingston 1333 4gb X 2 Wd caviar green 500gb & 1tb aerocool sycolne 2 can anyone teach me the basic things before oc? i want to use asrock xtreme tuner programs, am i just increase the cpu multiplier? more then 46x u need to adjust setting . n please browse thru this thread as they provide lot of info about how to oc ur rig , so just dont be lazy to go thru them b4 u ask how to oc my rig . QUOTE(clawhammer @ May 21 2011, 04:23 PM) Yes I have it boss really ar ... thats good .. i really headache with the temp w/o air cond in room , its hitting 60 celcius .Surprisingly my GTX 580 has lower load temps compared to GTX 570 This post has been edited by babyblur: May 22 2011, 08:27 PM |
|
|
|
|
|
May 26 2011, 09:30 PM
Return to original view | Post
#7
|
|
Junior Member
19 posts Joined: Mar 2008
|
QUOTE(ashraful @ May 26 2011, 06:06 PM) currently, i'm doing 4.7Ghz at 1.365vcore try this it might work for u ,trying to do 4.8Ghz, always fail prime (hardware failure) even i tried up the vcore until 1.4v. haha.. do i have to tweak the ram too? hehe.. thanks~! load line calibration = 100% vrm fixed frequency mode = 400khz digi + vrm phase control = extreme digi + vrm pwm mode = extreme vcore = 1.415 CPU PLL = 1.8 this is a few setting u need to set , u cant let all the setting to auto . |
|
|
Jun 1 2011, 05:32 PM
Return to original view | Post
#8
|
|
Junior Member
19 posts Joined: Mar 2008
|
QUOTE(Elite12 @ May 31 2011, 10:41 PM) hi guys i have a quite cpu cooler i think ;p Can i ask if 37C is normal for idle? or there is something wrong with my cooler pls advise. With prime95 i get about 60-66C. ur temp is ok , with prime85 60-66.c is ok also . mine core i7 2600k 4.8 Ghz hitting 70.c with cooler master V6GT .i5 2500k OC till 4.6Ghz tyvm |
|
|
Jun 10 2011, 08:48 PM
Return to original view | Post
#9
|
|
Junior Member
19 posts Joined: Mar 2008
|
just done prime95 @ 5.0 GHZ with 1.5 vcore . temp roughly @ 80.c .
|
|
|
Jun 10 2011, 10:48 PM
Return to original view | Post
#10
|
|
Junior Member
19 posts Joined: Mar 2008
|
QUOTE(clawhammer @ Jun 10 2011, 09:50 PM) Water cooled with 1 x MCR-320 and 1 x MCR-220 but he also has 2 x GTX 570 in the loop. yup ^^ with swiftech 655 pump also  |
|
Topic ClosedOptions
|
| Change to: |  0.0439sec
 0.52
 7 queries
 GZIP Disabled
Time is now: 9th December 2025 - 10:08 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.