I'm on 1101 bios and don't seem to get double reboots. It only happens sometimes. I didn't overclock my BCLK a lot yet for now.

can u change bclk to 101, go into windows then shut down.
next startup see got double post a not

Downclocked to 4.5GHz due to high room temp

---

Added on April 8, 2011, 8:48 pmis it latest LinX much stressful? It feels like after trying latest Linx i only got such high temp.

---

Added on April 8, 2011, 9:07 pm

I test back the previous 0.6.4 linx, i found the previous version takes longer time to complete each task, latest version takes 50sec high GFlops, previous takes 110sec low GFlops, its means latest version is really much stressful, it squeeze every juice of my cpu to work, tats why more heats is created.

This post has been edited by FiragaZ: Apr 8 2011, 09:07 PM

now i knew my h70 not tat sux actually , last time was surprise because saw you all using hyper 212 clock at 4.5ghz and get same temperature with my h70.

@firagaz, can you show you ram speed? cause i also clock at 4.5ghz now, how come i can get 124gflop but you only get 95gflop

My ram currently at default.

ASUS MaximusIV-Extreme BIOS 1204

ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...e-ASUS-1204.zip

This post has been edited by stasio: Apr 9 2011, 12:58 AM

mine...



This post has been edited by lichyetan: Apr 9 2011, 01:32 AM

I had the same problem Maybe a new BIOS will fix it.

This post has been edited by clawhammer: Apr 9 2011, 04:24 AM

u get 120+ GFlops because of performance ram?

Prime95 v26.6 Build 3

ftp://mersenne.org/gimps/p95v266.zip
ftp://mersenne.org/gimps/p64v266.zip

ur GFlops is a bit lower than average.
do u mind to try priority in LinX setting to "above normal"
clear up some ram to at least 3000MB for LinX, close all the background apps.

his glops is correct

u get more when running higher ram speed

This post has been edited by cstkl1: Apr 9 2011, 11:58 AM

4.6 2133MHz


4.6 1333MHz


2500K should be producing the same GFlops, unless CPU throttling.

Guys , how the performance for this MB : ECS P67H2-A3　，think of get this for the I7 2600K .

acther please tell me where to get a 2500K/2600K that does 5Ghz I'm stuck with a crap CPU!

what mean CPU throttling?

Keep buying lor, there will be new batch reaching today. Will be grabing more myself. kiak kiak kiak...

---

Added on April 11, 2011, 10:55 amWill be changing my board also due to the annoying double post. Argh !

This post has been edited by acther: Apr 11 2011, 10:55 AM

dude i had the same batch as his

it sucked so bad it needed cpu pll overvoltage at 4.6ghz

Where did you buy them? Why not you sell me your 5ghz chip after you've got your 5.3ghz chip? Lol

This is bad. Most chips can boot until 48x without cpu pll overvolt enabled. 5.0GHz at lower than 1.5v is no luck for me after 3 months hunting. Bad luck of mine.