[attachmentid=2192135]

my new case !! can fit 1440 radiator !! =D 360 * 4

I just did a quick Prime Blend run and aircond remote is 24C/medium fan and it's on the other corner of the room, not blowing directly to my PC which is under the table. Temps are lingering around 60C's and I'm only using a Feser 360 with 3 x F12's. I also have a GTX 570 together with the loop The Gentle Typhoon won't do any better, maybe 1C or less (at least not noticeable in my tests) Sorry if some of the apps are outdated, haven't been updating myself of late. If I do a Small FFT, temps will go up a little bit more but it will never exceed 70C. 32nm on a WC setup with 80C+ load is a sad thing, haha. It needs a better radiator and like I said, those Black Ice GT are some of the worst rads around.

[attachmentid=2223866]

Haha, I'm sure his would be better Nowadays I just leave everything stranded, don't even have the chance to really meddle with the PC. Come home, play PC, sleep, go to work again the next day. Life is boring

The Feser surely won't fit but I've just ordered a PC-A05N I plan to have a MCR-320 on top and MCR-220 at the bottom. HDD bays would be removed. I think the issue here is if a custom WC kit running at 80C then something is really wrong somewhere as temps should be better. As long as we have reasonable fans then we're good, the RM60-70 fan won't make any wonders and even if it does, the difference are somewhat minimal.

I'm just trying to help, no harm done and sorry if I said anything wrong

Edit: I also forget to mention that I'm using a CRAP Aqua Kryos XT Delrin block It's not even an Apogee XT or anything of that sort.

I initially wanted the TJ-07 but looking at the amount of money I had to spend on the casing and amount of time I can meddle with it, I thought it's a better option to go for cheaper cases. I stumbled upon this cute little Lian Li and I want to give it a shot

Actually you have any suggestions for an inverted ATX case? I was looking around for some good mid towers but can't seem to find it
Btw, are there any new Sandy Bridge processors coming soon like 2700K or some sort? It seems that everything now comes to a halt again

some chips are facing hard time even to stable at 4.8ghz. My case, 1.45v also not so stable. and sommore the temps are high even on mid range water kit. but its still cant compare to heat generated by older generation bloomfield at same clock. 

degradation in terms of speed or voltage?
some said it's due to BIOS when they're losing 100-200MHz after BIOS flashing.
waiting for MIVE-Z keke 

try this it might work for u ,



this is a few setting u need to set , u cant let all the setting to auto .