i bought the asus p8p67 - LE
cant set the vcore in bios .. so hard..
need to use ai suite II in os.. eventho i dont trust oc software lol

eh, where to get the updated linpack for stressing this SB platform ?

http://registrationcenter-download.intel.c..._10.3.2.005.zip

thanks stasio .
will try this later on this monday .
btw, this linpack will affect the performance of x58 platform or not ?

btw owikh did u swap ur maximus iv for b3 yet? i saw cex say ready stock?

Maximus B3 will be ready on March 15
Expecting other Asus boards to be the same.

ah ok saw cex state ready stock

owikh84,
did you try run your memory 8-9-8..?

At what speed?

2133 or above (with CR1).

This post has been edited by stasio: Feb 25 2011, 04:10 PM

Didnt try that supposely beaten by C7.
But doing great at 2133 7-10-7 @ 1.65v

eh that will fail prime95 latest version with AVX blend custom 3.5gb each fft 30 mins for sure. on the first fft

Could be true, didnt stress that for 24/7 purpose just for Pi is fine.

owh thanks...just need to be sure...here in LYN...for me is the actual test...review usually in different country and different enviroment...and again thanks owikh and others sifus

Finally Streamyx 4Mbps is back to normal after 4 days no signal...

Intel Core i7 2600K 5.0GHz HT ON (4C/8T)
Gigabyte P67A-UD7, F8X
2x2GB G.Skill RipjawsX 2200C7 @ 2133MHz 7-10-7-27-1T
2x MSI GTX580SLI, 930/4100Mhz
Corsair AX1200

134.5w vs 115.8w





Hottest ambient: 35C

This post has been edited by owikh84: Feb 27 2011, 04:10 PM

My fast run 32M on hypers,waiting for RipjawsX F3-17000CL8D-4GBXMD.



This post has been edited by stasio: Mar 1 2011, 09:44 AM

Maximus IV Extreme -(Official BIOS 1101)

ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...e-ASUS-1101.zip

SABERTOOTH-P67-(Official BIOS 1305)

ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...7-ASUS-1305.zip

This post has been edited by stasio: Mar 1 2011, 01:25 PM

m4e ppl heads up on that bios 1101

uses more vccio a lot more lol.
and u cannot rollback if u flash to that bios

thanks for sharing... but i had been getting BSOD 124 frequently since downgrading from 951 to 088. that was on 2nd bios since bios1 was corrupted lol couldn't recover anymore. Now i just wanna swap with B3.

---

Added on March 1, 2011, 7:56 pmUD7 is good for 5.0GHz and below only.
5.1GHz @ 1.55v bios set LLC2 load @ 1.608v still BSOD 101 (not enuf vcore)
on M4E 5.1GHz @ 1.51v bios set 100% LLC load @ 1.536v stable d.

This post has been edited by owikh84: Mar 1 2011, 07:56 PM

just back home and saw these on table





originally want to get ripjawsx from owikh84, but noticed that his set is green pcb, then i decided to try my luck to hunt a set black pcb ram.

will upload some result after 15 march.
now still thinking between p8p67 deluxe and p67a-gd80 which one to buy, need some suggestion from you guys. thank you.

This post has been edited by nncl: Mar 1 2011, 08:44 PM