Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
133 Pages « < 21 22 23 24 25 > » Bottom

Outline · [ Standard ] · Linear+

 Sandy Bridge Overclocking V1, 2500K/2600K/2700K | LGA1155 P67.Z68.Z77

views
     
TSowikh84
post Feb 17 2011, 11:14 PM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
QUOTE(monsh @ Feb 17 2011, 08:03 PM)
what bout PLL voltage ?
does it play any role ?
cause right now im using ud3 + team elite heatspreader with no intention of OCing ram atm .
just going for 4.5-4.8 hopefully.
do u guys think it is possible to reach 4.8 using Hyper212+ ?
*
most cases CPU PLL doesnt affect and wont help OC.
VTT aka VCCIO yes, some chip needs higher VTT ie. 1.25v to boot, some are able to do at stock 1.05v.
Not sure abt this aircooler but supposed can do up to 4.6GHz HT. hmm.gif
monsh
post Feb 18 2011, 02:52 AM

Let's Change The World !
*******
Senior Member
4,196 posts

Joined: Oct 2007
from what i've read on the internet, it mentions that not to touch VCCSA at all .
so does this VCCIO determines the IMC strength of the proc ?
well if it works like VTT, means it doesn't doo much unless im playing around with BCLK and ram right ?

what is the default PLL and what's with the 1.8v thingy ?
TSowikh84
post Feb 18 2011, 06:35 AM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
QUOTE(monsh @ Feb 18 2011, 02:52 AM)
from what i've read on the internet, it mentions that not to touch VCCSA at all .
so does this VCCIO determines the IMC strength of the proc ?
well if it works like VTT, means it doesn't doo much unless im playing around with BCLK and ram right ?

what is the default PLL and what's with the 1.8v thingy ?
*

PLL 1.8v stock is good enuf. Sometimes I need to adjust PLL sometimes dont. Increasing it will produce more heat and vise versa. Stability wise is still a myth.
VCCSA is mem controller, like NB aka IOH, let it auto but some said increasing it might help BCLK OC.
VCCIO stabalizes RTL, is actually the VTT, faster dram needs higher VTT. A proc with very good IMC doesnt need to increase VTT.
Out my knowledge, go google. tongue.gif
kevink82
post Feb 18 2011, 11:50 AM

Regular
******
Senior Member
1,134 posts

Joined: Apr 2008
Few I tried can actually pll, xxxxx and io doesn't seem to do anything for me. Sad none of my chip do more than 102 bclk.
TSowikh84
post Feb 18 2011, 12:17 PM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
QUOTE(kevink82 @ Feb 18 2011, 11:50 AM)
Few I tried can actually pll, xxxxx and io doesn't seem to do anything for me. Sad none of my chip do more than 102 bclk.
*
Every chip has its own frequency wall.
Let's say if my chip could do 100X53 = 5300 should be able to do 106X50 = 5300. For sure BCLK oc is harder as it is tied with mem frequency.
stasio
post Feb 18 2011, 12:25 PM

10k Club
********
All Stars
18,503 posts

Joined: Oct 2007
From: P.Jaya
CODE
We have new official UEFI releases for the P8P67 Standard/Pro/EVO/Deluxe/Sabertooth boards today. You will not be able to roll back to an older UEFI after this update as it contains new firmware and B3 stepping compatibility. Additional UEFI releases for the balance of our P67/H67 product lineup will be released in the near future after qualification testing is complete (H67/P67M/WS). The next official UEFI update (13xx series) in the near future will feature additional user enhancements, USB drift fix and updated Marvell/Intel MEI controller firmware. I highly suggest a Clear CMOS event after loading the updated UEFI and then entering UEFI to reset your custom settings. JJ and I will have updated information on memory setups and SSD testing over the course of the next week.

1. Reset your UEFI to Optimized Defaults, reboot, enter UEFI and then flash to the new UEFI build.
2. After flash and restart, shutdown the system before you enter Windows/Linux.
3. Remover the power cord from the power supply, wait thirty seconds, press Power On button to clear any remaining charge, clear CMOS for five seconds, reattach the power cord, power on the system, enter UEFI, set to Optimized Defaults, save and exit.
4. Enter UEFI, set your system to customized settings based on your system configuration (RAID, OC, etc), save and exit.
Note - These UEFI releases will be on our FTP and Support Sites shortly.


P8P67 Deluxe / Pro / EVO / Standard / Sabertooth - 1305 -
Change Log -
- Improved OC performance using Multipliers or Auto Overclocking
- Improved BCLK and DRAM OC capabilities when enabling the “Internal PLL Overvoltage” option in BIOS. Note - Sleep/Hibernate will not operate properly due to Intel Specs.
- Improved USB performance, Improved P67 XMP profile compatibility (please note, memory with X58/P55 XMP profiles will generally work but is not optimized for P67 and will usually cause problems when overclocking in several cases)
- Per Core Save Fixed
- Disable/Enable BT
- Minor Bug Fixes including new Auto Rules for C-States (C3/C6) when overclocking. If you are overclocking, C-States will be disabled for enhanced performance.
- Intel RAID will not support bootable volumes greater than 2.2TB yet, Intel plans a firmware update shortly to allow this operation. AHCI and IDE are not affected.
- Enhanced AI Suite II compatibility

UEFI 1305 - Pro
http://www.mediafire.com/file/f9ujd5kn3l8k...O-ASUS-1305.rar

UEFI 1305 - Standard
http://www.mediafire.com/file/74uqtkkctbk4...7-ASUS-1305.rar

UEFI 1305 - EVO
http://www.mediafire.com/file/uhyxd79ihfht...O-ASUS-1305.rar

UEFI 1305 - Deluxe
http://www.mediafire.com/file/k84d6d5dz6e1...E-ASUS-1305.rar

UEFI 1305 - Sabertooth
http://www.mediafire.com/file/dn39uvqj5ciy...7-ASUS-1305.rar

This post has been edited by stasio: Feb 18 2011, 12:27 PM
monsh
post Feb 18 2011, 12:29 PM

Let's Change The World !
*******
Senior Member
4,196 posts

Joined: Oct 2007
it's too plain on the SB side of story .
anyway, will give it a try on monday .
might be able to finally build up my system today or tomorrow after 3 months of delay T_T
powdercoating and all are finishing .
hehe
kakicam
post Feb 18 2011, 06:30 PM

Enthusiast
*****
Senior Member
992 posts

Joined: Sep 2010
QUOTE(monsh @ Feb 18 2011, 12:29 PM)
it's too plain on the SB side of story .
anyway, will give it a try on monday .
might be able to finally build up my system today or tomorrow after 3 months of delay T_T
powdercoating and all are finishing .
hehe
*
3 months..? huhu i dont know if i can wait that long.... smile.gif
monsh
post Feb 18 2011, 07:29 PM

Let's Change The World !
*******
Senior Member
4,196 posts

Joined: Oct 2007
haha tongue.gif
well i had to .
no choice .
problems and many celebrations going on .
shop closing, dispute case and all .
had to wait man .

now its finished but d fella doing my casing is now sick .
can't come to deliver the items T_T
stasio
post Feb 18 2011, 08:52 PM

10k Club
********
All Stars
18,503 posts

Joined: Oct 2007
From: P.Jaya
Maximus IV Extreme (BIOS 1092):

http://91.121.148.119/downloads/BIOS/Maxim...e-ASUS-1092.ROM

-Shows CPU Target frequency at boot
kevink82
post Feb 18 2011, 09:10 PM

Regular
******
Senior Member
1,134 posts

Joined: Apr 2008
QUOTE(stasio @ Feb 18 2011, 08:52 PM)
Maximus IV Extreme (BIOS 1092):

http://91.121.148.119/downloads/BIOS/Maxim...e-ASUS-1092.ROM

-Shows CPU Target frequency at boot
*
Not a very exciting feature i have to say sad.gif
kakicam
post Feb 19 2011, 03:26 AM

Enthusiast
*****
Senior Member
992 posts

Joined: Sep 2010
QUOTE(monsh @ Feb 18 2011, 07:29 PM)
haha tongue.gif
well i had to .
no choice .
problems and many celebrations going on .
shop closing, dispute case and all .
had to wait man .

now its finished but d fella doing my casing is now sick .
can't come to deliver the items T_T
*
hahaha pity u.. but they said 'good things come to those who wait'

Added on February 19, 2011, 3:26 am
QUOTE(kevink82 @ Feb 18 2011, 09:10 PM)
Not a very exciting feature i have to say  sad.gif
*
why not very exciting bro..?

This post has been edited by kakicam: Feb 19 2011, 03:26 AM
monsh
post Feb 19 2011, 05:25 AM

Let's Change The World !
*******
Senior Member
4,196 posts

Joined: Oct 2007
yeah .
waited 3 months .
now got all items ready at my place .
will assemble everything and do leak test .
hopefully by tomorrow will finish everything .
oh btw, the front panel got problem a bit .
im thinking its because of the powdercoat makes it a bit thicker .
hopefully can do some alteration without destroying the beauty of it .
fingers crossed >.<"
kakicam
post Feb 19 2011, 06:24 AM

Enthusiast
*****
Senior Member
992 posts

Joined: Sep 2010
hope everything going well there.. oh yeah saw u have btx mod to your tj. cud u send me some pics..? btw are u using it for sb or 1366..?
stasio
post Feb 19 2011, 10:34 AM

10k Club
********
All Stars
18,503 posts

Joined: Oct 2007
From: P.Jaya
GA-P67A-UD4 - BIOS F8F

http://www.mediafire.com/?vk1bko5dl9e9ace

-fix "Vcore + DVID + cold start"
-fix Vdimm
-18.02.2011

Now you can use newly released:

Prime95 v26.5 Build 3

ftp://mersenne.org/gimps/p95v265.zip
ftp://mersenne.org/gimps/p64v265.zip

and

CPU-Z 1.57

ftp://ftp.cpuid.com/cpu-z/cpu-z_1.57-setup-en.exe

ftp://ftp.cpuid.com/cpu-z/cpu-z_1.57-32bits-en.zip
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.57-64bits-en.zip

This post has been edited by stasio: Feb 19 2011, 11:19 AM
monsh
post Feb 19 2011, 02:30 PM

Let's Change The World !
*******
Senior Member
4,196 posts

Joined: Oct 2007
@kakicam

im on bloomsfield .
SB is my fren's rig .
he asked me to build it up and clock it up ^^,
TSowikh84
post Feb 19 2011, 10:35 PM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
re-run on BIOS 1090...

i7 2600K @ 5.1 GHz HT ON
user posted image
kakicam
post Feb 20 2011, 06:20 AM

Enthusiast
*****
Senior Member
992 posts

Joined: Sep 2010
QUOTE(owikh84 @ Feb 19 2011, 10:35 PM)
re-run on BIOS 1090... 
» Click to show Spoiler - click again to hide... «

*
wahh temp 92 degree still stable..?

Added on February 20, 2011, 6:22 am
QUOTE(monsh @ Feb 19 2011, 02:30 PM)
@kakicam

im on bloomsfield .
SB is my fren's rig .
he asked me to build it up and clock it up ^^,
*
aahhh same here.. i oso on bloomsfield.. havent decided to jump into sb yet. but sb is very tempting..

This post has been edited by kakicam: Feb 20 2011, 06:22 AM
kevink82
post Feb 20 2011, 07:02 AM

Regular
******
Senior Member
1,134 posts

Joined: Apr 2008
hmmm i also notice new bios is harder to clock dont know y but cant be bother to flash back to older one atm...
TSowikh84
post Feb 20 2011, 10:28 AM

i7 Clan
Group Icon
Elite
8,711 posts

Joined: Nov 2007
From: Butterworth, PG / Machang, Kelantan
next time I will do LinX at least 50 runs to conclude stability.
« Next Oldest · Overclockers United · Next Newest »
 

133 Pages « < 21 22 23 24 25 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0167sec    0.36    6 queries    GZIP Disabled
Time is now: 2nd December 2025 - 06:58 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.