Another supporter of GSKILL. Post some results ya.

The vcore vary from board to board and some board require a few step higher voltage to stable at same clock speed.

Trial run, not the limit yet and sub-timing not optimised as well

Asrock Z68 Extreme 4

Memory run at 2125Mhz at 7-7-7-20. Factory BIOS.



This post has been edited by louislkw: May 5 2011, 10:36 AM

Thank you. I'm very young le dun call me so old.

Ya, will do Pi in this few days.

1.71V to work for this. My 3rd and 4th best sticks. Vtt didnt touch.

Not sure. Let you know if I have any info.

No waza, sub-timing untouch and vtt-auto

Personal preference. Given you 5GHz, are you fully utilise the speed and also with more heat output except the numbers is look nicer in benchmarks. Just find the sweet spot correspond to your comfortable heat output.

Only max the hws when there is a need.

The Professional board would be a choice for 24/7 set up. Top end boards are mean to max the hws in benchmarking and not much different from mid range boards in 24/7 setup.

DDR3 2284MHz running without sweat..



No usb to ps/2 converter, cant run super 32M

300% of memtest just serve as a milestone. I dun have SP1 installed on my bench hdd.

As you know, memory are behave different even the same pair and the voltage vary from motherboard to motherboard. One work higher and one work lower.

Definately my pair is not binned from GSKILL.

PS: Received quite a few of PM enquiry about GSKILL memory hence offer GSKILL memory Mass Order. Limited Time till 31/5/2011 depend on response. If respose good, order will proceed early. Pls PM me your order. Payment will be through PAYPAL.

This post has been edited by louislkw: May 17 2011, 05:21 PM

1.6V good luck to ur chip..

VTT hmm.. only increase in lousy board...

You mean this one?

Nope no way can do it, the better one is the 8-9-8 @ 2133mhz..

GSKILL Ripjaw-X F3-12800CL8D-4GBXM 8-8-8-24 @ 1.5V

Straight to CL7-8-7-24 @ 1.5V



Without much issue,

DDR3 2133MHz 9-11-9-28 @ 1.6V

No. It should be Hynix IC.

It is just served as a info. Shoudn't be a problem under prime but take hours.

What problem you have?

Just received the sample from Gigabyte. Z68 bundled with 20GB Intel 311 Series SSD.

GSKILL SNIPER

Spec 1600MHz, 9-9-9, 2x4GB

1.585V, 2133MHz


HyperPI32M

Let rock it.. Spec GSKILL 1866mhz 9-10-9-28 16GB,

Running at 2133mhz 9-11-10-28 16GB at 1.625V

HyperPI 32M


Super PI 32M


Aida64


LinX


This post has been edited by louislkw: Jul 24 2011, 06:34 PM

Want BIG want FAST????

Give you BIG and FAST. 4x4GB 16GB memory running in 2133mhz with only 1.6133mhz oh with 2 different pairs memory oh!!

Very big improvement for MSI. Not marketing talk.

Black slots - DDR3 1866mhz CL9-10-9-28 1.5V spec
Blue slots - DDR3 1600mhz CL9-9-9-28 1.5V spec

Hyper PI 32M half way,


Completed Hyper PI 32M,


LinX for one hour plus test for stability. Fully load the cpu and memory to maximum!!

---

Added on August 12, 2011, 4:14 pm













This post has been edited by louislkw: Aug 12 2011, 04:19 PM

Hello Guys,

Pls dun miss it!!! Waiting YOU!

http://forum.lowyat.net/topic/2037249

ending or started?