Outline ·
[ Standard ] ·
Linear+
Sandy Bridge Overclocking V1, 2500K/2600K/2700K | LGA1155 P67.Z68.Z77
|
DesktopLimousine
|
 Jul 27 2011, 09:32 PM
|
|
QUOTE(owikh84 @ Jul 27 2011, 08:21 PM) yes, could be this reason also, since higher VRM freq will increase temp. VRM is to regulate the voltage for stability & OC. Higher VRM freq increases OC range; wheres lower VRM resulted in better system stability. I've just saw an Asus forum recommend to use 350 VRM frequency for OC.. i found it http://hardforum.com/showthread.php?t=1578110This post has been edited by DesktopLimousine: Jul 27 2011, 09:35 PM |
|
|
|
|
|
DesktopLimousine
|
Jul 27 2011, 10:22 PM
|
|
|
does CPU can damage if run at undervoltage?
|
|
|
|
|
|
DesktopLimousine
|
Jul 27 2011, 10:40 PM
|
|
|
QUOTE(owikh84 @ Jul 27 2011, 10:26 PM) undervolt will get BSOD bro. how about CPU? nothing happen? |
|
|
|
|
|
DesktopLimousine
|
Jul 28 2011, 09:41 PM
|
|
|
Asus  |
|
|
|
|
|
DesktopLimousine
|
Jul 30 2011, 12:03 AM
|
|
|
what is LINX? and how to test it? btw, which one is more good, Linx or Prime95?
|
|
|
|
|
|
DesktopLimousine
|
Jul 30 2011, 01:10 AM
|
|
|
which problem size and memory(mib) i should choose for the testing?
|
|
|
|
|
|
DesktopLimousine
|
Jul 30 2011, 09:40 AM
|
|
|
QUOTE(stasio @ Jul 30 2011, 09:09 AM) is this BIOS? i cant see the bios 0603 version for p8z68-v at asus website? where'd u get the latest bios? This post has been edited by DesktopLimousine: Jul 30 2011, 09:43 AM |
|
|
|
|
|
DesktopLimousine
|
Jul 30 2011, 08:17 PM
|
|
|
QUOTE(stasio @ Jul 30 2011, 03:22 PM) Yes,is BIOS.  ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/This BIOS should be posted on the Download site on July 31. lol, nice work dude~ im going to update my bios, but some people said it's too danger for updating mobo bios, it can cause failure, only update if we got problem.. is this true? |
|
|
|
|
|
DesktopLimousine
|
Jul 30 2011, 09:05 PM
|
|
|
QUOTE(selfdz87 @ Jul 30 2011, 08:32 PM) no problem if u know what are u doing... btw with asus board,its really eazy to update bios... just follow the manual... update using pendrive rite? what is ur bios version for p8z68-v? This post has been edited by DesktopLimousine: Jul 30 2011, 09:05 PM |
|
|
|
|
|
DesktopLimousine
|
Jul 31 2011, 03:02 AM
|
|
|
my current speed for my 2600k is 4.5ghz at 1.25v, it have been stable for 2 days just surfing the internet and forum.. but today, when i played game for 3 hours, i got BSOD error 000x0000124
why is it suddenly BSOD after 2 days stable?
and this kind of error "0000x00000124" is stand for?
btw, i've stress it with Linx and no error for my CPU, maybe it is the problem with the RAM? VTT? how to set VTT?
This post has been edited by DesktopLimousine: Jul 31 2011, 03:24 AM
|
|
|
|
|
|
DesktopLimousine
|
Jul 31 2011, 11:54 AM
|
|
|
QUOTE(owikh84 @ Jul 31 2011, 07:31 AM) up ur vCore a bit check refer to post #1 for BSOD code  but, with my current vcore, it was stable using IBT and LinX test.. some people said it was VTT problem, how to find setting for VTT in Asus BIOS? |
|
|
|
|
|
DesktopLimousine
|
Jul 31 2011, 03:10 PM
|
|
|
QUOTE(owikh84 @ Jul 31 2011, 02:28 PM) BSOD 124 is more likely related to insufficient vcore. increasing VTT might help. For Asus board, VTT is now combined into VCCSA/VCCIO. thx for the guide, will test it with IBT and Linx, prime95 too long :S
Added on July 31, 2011, 3:20 pmwhat stress setting should i set for IBT? stress level maximum? my current RAM is 4GB (2x2GB) 1600mhz This post has been edited by DesktopLimousine: Jul 31 2011, 03:20 PM |
|
|
|
|
|
DesktopLimousine
|
Jul 31 2011, 03:37 PM
|
|
|
lol, an error.. so it surely problem with cpu?
|
|
|
|
|
|
DesktopLimousine
|
Jul 31 2011, 10:11 PM
|
|
|
for Asus EZ mode in Bios setting, should i choose power saving mode, normal mode, or Asus optimal mode for overclocking?
|
|
|
|
|
|
DesktopLimousine
|
Jul 31 2011, 10:43 PM
|
|
|
QUOTE(owikh84 @ Jul 31 2011, 10:35 PM) actually safe voltage for SB up to 1.55v. But i don't think air cooler is able to do handle if not running in an aircond room. around 4.0GHz most SB could use stock voltage @ 1.25v; 4.5GHz at 1.35-1.4v. but then again don't forget the vdroop effect. normal mode should be fine. pls refer to Asus P67/Z68 OC Guide for more OC tips. mobo specific question sometimes hard to answer here. what is the value for threads setting in IBT? |
|
|
|
|
|
DesktopLimousine
|
Jul 31 2011, 11:17 PM
|
|
|
btw im using 2600k
|
|
|
|
|
|
DesktopLimousine
|
Aug 1 2011, 12:20 AM
|
|
|
hehe nvm, btw thx i'll post the best and stable vcore i can get for 4.5Ghz
Added on August 1, 2011, 4:49 amshould i set the VRM frequency to manual in asus bios setting?
Added on August 1, 2011, 6:45 amhmmm  my current speed is at 4.5Ghz at 1.29V now, and it is stable with IBT and Linx test.. last time i am able to stable it at 1.25V with Linx, but i try to download IBT and try to stress with it. it become un-stable and need to change the vcore to 1.29v  This post has been edited by DesktopLimousine: Aug 1 2011, 06:45 AM |
|
|
|
|
|
DesktopLimousine
|
Aug 1 2011, 02:45 PM
|
|
|
without HT, im getting low fps
|
|
|
|
|
|
DesktopLimousine
|
Aug 1 2011, 03:50 PM
|
|
|
QUOTE(duboisi @ Aug 1 2011, 03:39 PM) What is the vcore as reported in CPU-Z @ 4.5Ghz? i set in BIOS 1.25v, and in CPUZ it shows 1.238~1.240 |
|
|
|
|
|
DesktopLimousine
|
Aug 1 2011, 04:51 PM
|
|
|
im also using air-cooling coolermaster v6gt heatsink but i dont know what problem is this, using Linx my voltage 1.25v is stable, but when im using IBT it's not stable and need to increase voltage.. |
|
|
|
|
Quote
0.2074sec
0.40
7 queries
GZIP Disabled