Outline ·
[ Standard ] ·
Linear+
Sandy Bridge Overclocking V1, 2500K/2600K/2700K | LGA1155 P67.Z68.Z77
|
stasio
|
 May 19 2011, 11:06 PM
|
|
QUOTE(hilmiangah @ May 19 2011, 11:01 PM) im already on those saw ur post at tweaktown forum and grab it but still no avail a mere 4.4ghz need 1.4v at bios and the vdrop and vdroop is bad gonna add another 120 rad to this loop and gonna see how much of an improvement i can get You can switch BIOS to Z68X-UD4-B3 with 10 levels of LLC.  .........modded by me and have Touch BIOS.  I am also on Z68X BIOS and need less Vcore then for P67A(B2/B3).  This post has been edited by stasio: May 19 2011, 11:12 PM |
|
|
|
|
|
stasio
|
May 19 2011, 11:22 PM
|
|
|
QUOTE(hilmiangah @ May 19 2011, 11:14 PM) its compatible?? ok gonna try em out tomorrow OK,PM me tomorrow. |
|
|
|
|
|
stasio
|
May 20 2011, 10:37 AM
|
|
|
BSOD codes for overclocking on the first page. Probably Vcore to low.Give more details.  |
|
|
|
|
|
stasio
|
May 20 2011, 10:52 AM
|
|
|
Depend of your bugdet,if is cheaper buy another indentical set of 1333 2x2GB.
8GB DDR3 Vengeance CL8 you must run separatly.
This post has been edited by stasio: May 20 2011, 10:53 AM
|
|
|
|
|
|
stasio
|
May 20 2011, 12:15 PM
|
|
|
QUOTE(hilmiangah @ May 20 2011, 11:12 AM) yo stasio dude can u pass me those bios u were talking about? thanks Send PM. |
|
|
|
|
|
stasio
|
May 20 2011, 12:26 PM
|
|
|
QUOTE(hilmiangah @ May 20 2011, 12:07 PM) here's the temp of mine
Same Vcore as my on 4.8GB.Testing BIOS F6 for Z68X-UD7 on my P67A-UD7.  » Click to show Spoiler - click again to hide... « |
|
|
|
|
|
stasio
|
May 20 2011, 12:56 PM
|
|
|
QUOTE(hilmiangah @ May 20 2011, 11:12 AM) yo stasio dude can u pass me those bios u were talking about? thanks Once you you are in Z68X BIOS,normally flash with Q-Flash,FlashSPI or Touch BIOS any original BIOS (not modded). Btw,here is latest beta BIOS: GA-Z68X-UD4-B3 - F7aThis post has been edited by stasio: May 20 2011, 12:57 PM |
|
|
|
|
|
stasio
|
May 20 2011, 01:36 PM
|
|
|
QUOTE(ashraful @ May 20 2011, 01:18 PM) now i know... it's my easy tune problem... everytime i opened my easy tune, the multiplier went down form x45 to x 34... why is that? hahah. Now it solved... unless i open easy tune again. haha.. i think so. [attachmentid=2224669] Are you have latest release? Easy Tune6 (Intel) B11.0512.1-Add LLC levels  |
|
|
|
|
|
stasio
|
May 20 2011, 02:59 PM
|
|
|
QUOTE(ashraful @ May 20 2011, 02:54 PM) lol.. i haven't thought of that.. thanks~!! oh... anyway, my 4.5ghz is not stable i think so at around 45 mins of prime 95... the worker#4 always says hardware failure.. can my ram is the one who coused this? vcore 1.35v qtt 1.15v hehe.. thanks! Vcore a notch up 1.355-1.36. Your memory is 1333...... latency? This post has been edited by stasio: May 20 2011, 03:00 PM |
|
|
|
|
|
stasio
|
May 20 2011, 05:01 PM
|
|
|
QUOTE(ashraful @ May 20 2011, 04:55 PM) lol.. i wish my memory is 1333 latency.. it's a normal ram, lol not the performance one. (9-9-9-24) i've run prime for 2 hrs now.. hopefully it can lasts another 12 hrs. hehe.. [attachmentid=2224969] Why you didn't Enable LLC? Not performance RAM you can set QPI/VTT and SAV on AUTO. |
|
|
|
|
|
stasio
|
May 20 2011, 05:24 PM
|
|
|
QUOTE(ashraful @ May 20 2011, 05:12 PM) Lol.. i enabled LLC at bios.. but i need to do anything at easytune? Sorry i didn't know about these things. ahah. I read the glossary at post#1 i thought that everyone has to change the qtt/sav haha..  i'm wrong again. so, i should cancel my prime now and restart again eh? anyway, is this ram ok?G SKILL TRIDENT DDR3-2133 PC3 17066 4GB KIT ([TDS] F3-17066CL9D-4GBTDS ) = RM699 If LLC is Enabled in the BIOS it's OK (ET6 show Default). Your memory need only Auto in QPI/VTT and SAV. For testing in prime you decide. RM699 are to expensive.Contact Owikh84 or DDR3 2133 kit you can found for RM500 or less in garage sales. |
|
|
|
|
|
stasio
|
May 24 2011, 04:30 PM
|
|
|
QUOTE(clawhammer @ May 24 2011, 02:50 PM) The world wide web a.k.a Internet is the largest library in the world  Here's what I found using google in less than 1 minute: http://techreport.com/articles.x/20377/1Have a good read and hope it answers your question. /techreport.com...what a crap testing......CPU-Z latency test,ha,ha   |
|
|
|
|
|
stasio
|
May 25 2011, 05:00 PM
|
|
|
|
|
|
|
|
|
stasio
|
May 27 2011, 07:46 PM
|
|
|
|
|
|
|
|
|
stasio
|
May 27 2011, 07:58 PM
|
|
|
QUOTE(Celestia @ May 27 2011, 07:55 PM) new bios? where u got them? cant find on official site  |
|
|
|
|
|
stasio
|
Jun 22 2011, 08:58 PM
|
|
|
|
|
|
|
|
|
stasio
|
Jun 22 2011, 10:39 PM
|
|
|
P8P67 ftp://61.63.40.137/pub/ASUS/mb/LGA1155/P8...7-ASUS-1704.zipP8P67-EVO ftp://61.63.40.137/pub/ASUS/mb/LGA1155/P8...O-ASUS-1704.zipP8P67-PRO ftp://61.63.40.137/pub/ASUS/mb/LGA1155/P8...O-ASUS-1704.zipMaximus IV Extreme-Z http://91.121.148.119/downloads/BIOS/Maxim...Z-ASUS-0402.ROM1. Improve S4 resume support under GPT boot configuration 2. Improve EPU support for new CPUs 3. Improve USB compatibility 4. Improve PCIE RAID card compatibility 5. Improve S3 resume support when using high frequency DRAM 6. Enable support of IRST 10.5.x 7. Change CPU temperature display from Tjunction to Tcase This post has been edited by stasio: Jun 23 2011, 11:02 AM |
|
|
|
|
|
stasio
|
Jun 23 2011, 12:53 PM
|
|
|
CPU-Z 1.58 Betahttp://www.fileden.com/files/2010/4/14/282...8-32bits-en.zip- AMD FX "Bulldozer" processors family. - Intel Sandy Bridge-EP processors preliminary support. Edit: Still bug , show VTT voltage on Gigabyte Z68X-UD7 (BIOS).   This post has been edited by stasio: Jun 23 2011, 02:03 PM
|
|
|
|
|
|
stasio
|
Jun 24 2011, 02:30 PM
|
|
|
All Gigabyte Z68 series official BIOS updated.
|
|
|
|
|
|
stasio
|
Jun 24 2011, 04:05 PM
|
|
|
CPU-Z 1.58ftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-setup-en.exeftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-32bits-en.zipftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-64bits-en.zip- AMD FX "Bulldozer" processors family (K15). - AMD Llano processors family (K12). - Intel Sandy Bridge-EP processors preliminary support. This post has been edited by stasio: Jun 24 2011, 04:05 PM
|
|
|
|
|
Quote
0.0243sec
0.47
7 queries
GZIP Disabled