Outline ·
[ Standard ] ·
Linear+
Tv cabinet, Can anybody share your tvcabinet design
|
weikee
|
 Jan 6 2012, 01:51 PM
|
|
QUOTE(phoenix69 @ Jan 5 2012, 11:04 PM) I observe generally all TV cabinet are custom made. The main feature is the Board behind the TV. Usually a Flat Screen TV is installed onto the Board. Thus a wall bracket will be attached to the Board and a hole is opened on the Board to allow TV connection cable to be hidden behind the Board. My query is:---  What is the best design/hinges should the board have to allow easy cleaning and access to the board back area?? Any diagram?? Mine is movable TV table with the 6" raised on the end of the table, cable run out from the raised 6", and when i hang my TV on the wall, or put using TV stand you don't see the cables. All my equipments is place on both side, and there is a hidden "tunnel" go to center drawer. So All on/off and adapters are place in the center. Not sure if you got it. Anyway here the previous picture i took. Maybe later when I have time take the latest photos, with the TV and some of the equipments on the side. 
Added on January 6, 2012, 1:52 pmIs also custom made, using plywood, not melamine. This post has been edited by weikee: Jan 6 2012, 01:52 PM |
|
|
|
|
|
weikee
|
Jan 6 2012, 09:25 PM
|
|
|
QUOTE(phoenix69 @ Jan 6 2012, 09:13 PM) I think I get you. Any Feature Wall / Board later? That is the wall, paint suppose to be darker, but come out lighter color. Anyway, what's done is done. So just enjoy the outcome.  |
|
|
|
|
|
weikee
|
Jan 6 2012, 10:53 PM
|
|
|
QUOTE(webby88 @ Jan 6 2012, 10:40 PM) I have seen in some houses where monster cables are wall embedded and terminated on the wall. Here you can then plug your rear speaker to it. This want is conceal, and is done during renovating time. |
|
|
|
|
|
weikee
|
Jan 7 2012, 11:45 PM
|
|
|
QUOTE(Eleganz Concept @ Jan 7 2012, 01:55 AM) ic, but any ideal where to get this kind of plug? should be in audio shop? or anywhere? Can try the av system shop sell, just like you see it in hotel wall face this type of face plate. |
|
|
|
|
|
weikee
|
Mar 1 2012, 07:21 PM
|
|
|
Equipment remote will not work, wifi is ok cause signal can penetrate wood easy maybe loose some strength.
Mine all equipment out on left and right of the tv cabinet, center is power, signal cables, network with cover.
I think custom made have standard price should be rm300 per foot.
|
|
|
|
|
|
weikee
|
Mar 1 2012, 09:37 PM
|
|
|
Got Kid(s) or not? If got better don't made what's on the photo. my friend unit drop after her 2 kids climb up and jump multiple times.
|
|
|
|
|
|
weikee
|
Mar 6 2012, 04:53 PM
|
|
|
QUOTE(digir @ Mar 6 2012, 03:36 PM) Just to share info with everyone. Placing aircond directly above TV or bed is a very bad idea. If leak, it till damage your equipment. Bed, not too bed just wash. But do you get efficient cooling area if place above the bed? |
|
|
|
|
|
weikee
|
Aug 1 2012, 09:51 AM
|
|
|
Using market rate (I think) custom is about RM 300 per foot run. This was my price last year using plywood.
|
|
|
|
|
|
weikee
|
Aug 2 2012, 09:16 AM
|
|
|
QUOTE(jforjean @ Aug 1 2012, 02:40 PM) console only cost RM300pfr...?
i wish to see the photo, mind to share?  Think my reno usj thread got show the TV cabinet. Currently my new office I won't be able to view photo bucket. |
|
|
|
|
|
weikee
|
Aug 17 2012, 08:30 AM
|
|
|
QUOTE(Escaflowne @ Aug 17 2012, 01:18 AM) Hi all, I need to ask, is it possible to install a TV panel like this ? [attachmentid=3003937] Ignore the material, I didn't put the exact material yet. I'm more concerned on the back panel behind the Flat Panel. The wiring will be concealed behind the wall, then there are blocks of wood/using melamine materiel as the base where the TV would sit on. My installer said it not such a good idea as the it's not strong enough to hold the TV. what is your opinion? Could someone advice as I really would like my panel to look somewhat like this. My 2 cents, the middle wood if is woods, make a gab in between and this gab is the wall, mount the TV bracket to the wall. You need top find a TV bracket that can extend outward, to the thickness of the wood. It will look ugly if the TV is not Install. |
|
|
|
|
|
weikee
|
Sep 28 2012, 08:29 PM
|
|
|
It need to custom build friend. It need to mount to the wall. Budget about 250 to 300 per for run depend on material use.
|
|
|
|
|
|
weikee
|
Jun 15 2013, 08:37 PM
|
|
|
QUOTE(sovietmah @ Jun 15 2013, 08:17 PM) I heard that it is incorrect if your wiring pipe goes horizontally from bottom. suppose to be horizontally and vertically from top ceiling. Not sure how true it is.  Electrical is top to bottom, water pipe bottom up. |
|
|
|
|
Quote
0.0216sec
0.60
7 queries
GZIP Disabled