Please give me some comment about this product from www.onitek.com.my
anyone try using it?
some said bi fold cause alot of problem
i'm looking for someone can design my kitchen like onitek type..

I'm using Onitek for my bi-fold doors and also sliding glass doors, so far no problem.

How much is the bi fold? U using fibre glass or poly glass? Any different?

bi-fold im using fibre glass panel. It looks and feels just like any other typical bi-fold doors imho. not sure how much is the bi-fold cuz it was charged one lump sum by my contractor.

they got two website...i think both is the same...but now they using Polyglass instead of fibreglass
so if anyone here using polyglass do let me know the differences...

www.onitek.com.my
and www.ofiano.com

renovation cost a bomb..
or any other type of door for bath room instead of bi fold?
can somebody post your door picture to share.. fibre and polyglass

found a few nice design on the website...
just wondering how it look on real life...the colour & design look...

http://www.doormanufacturers.com.my/panel_...creative02.html

This post has been edited by glamour: Dec 20 2010, 03:49 PM

Sliding door with tempered glass will look nicer but will cost even more

tumpang thread here,

Any one know what brand got sell those plastic PVC bathroom door? just a normal PVC bathroom door with better design (compare to those cheapo-looking PVC door given by developer).

Also what is the price for such door? Hopefully it wont cost more that bi-fold (which bi-fold in the range of 300-500)....

Bro. I think no one using this Onitek door here u only bro. Hehe

Hey! I'm sharing my bathroom bifold door...



Price is around RM350.

This post has been edited by simsimsim: Dec 21 2010, 03:20 PM

I think get bi fold better. I'm now considering to own one too. I got 5xset. www.onitek.com.my ... Nowdays the door look high End and alot art design to choose. Wish to match with my wall colour.


hope more people can show off their cool design here...

This post has been edited by glamour: Dec 21 2010, 08:32 PM

www.wix.com/intrends/onitekdoor

Call 016-7199091 for quote. Good service.

Looks good. I like it when a brand stresses on technical points.

This post has been edited by phoenix69: Sep 24 2011, 11:57 AM

i also will get onitek bi-fold for my bathroom...

Another brand is vitally...price is rm350 (except white coated frame). Hundred of design to choose

Anyone hare actually use this Onitek door before.
It seems to be priced higher than others.
Does it feels solid relative to other brands??????

I know in market have 2 type of folding, the older generation where the clip and jump out. The newer have another clip bottom, and more solid.

Also is about time for me to source 5 to 6 units.

Just make sure that air flow to this door area is not strong. If not you will regret it.

Below is my installation price survey for bi-fold Fiberglas (powder coated);
Reliance Rm 400 (disc rm50 on Reno expo)-delivery 2-3 wk
Vitally Rm 370 min 3 pcs- delivery 1 wk
Onitek ??
In terms of quality, so far reliance is good.

Usually Reliance position themselves in the premium section so I guess their quality has standard.

But Onitek specify 3 main specification that reliance doors do not have
1.SUPER MAGNETIC DESIGN - closer closure.
2.FULL STAINLESS STEEL BEARING ROLLER - durable and anti-rust
3.ADJUST NUT - No need to screw to fill up the gap betwwen the frame and the wall.
(I sound like sales man , got this from Onitek website - http://www.ofiano.com/product/bifold_door/main.html

The question is - Does this makes Onitek better ??!!

My black aluminum framed with frosted glass
bath door and lockset cost my RM650 each
inclusive fitting....
the end result? >>>>> chilling good!

This post has been edited by ride00: Sep 27 2011, 09:09 PM

Only time will tell or better still previous customers.
How about Onitek pricing and delivery?
There's comment saying Onitek installation
workmanship not good, so I really do not know.
I would go for reliance but waiting time is long and Onitek is attracting me with that new features...hmmm

Onitek brand ??

Is it anti jump door?

bad service on onitek.. check with their sales, and can't even provide me quotation after 2 week!! even call to their office and write email .
no one bother ..

they even write in thier website saying
"Onitek has strived to achieve excellent performance in our products and services. Therefore, it has always been Onitek corporate vision to work exceeds customer expectations for better value.
Your satisfaction is always our main priority.!!

i just install 3 pcs onitek bi fold door.. RM 330 per piece..

look good.

planning to install another one at my master bedrooms.

With new type of hangger or old type?

Tot of checking on ofiano, but called to
the Puchong centre, service not so good.
Can't see any of the bi-fold products
which claimed to be good. Ended up with
Reliance instead, in homedec...

They at HomeDec this week too....

Too bad, I walked thru the hall but didn't
see their booth. Did see some others not
so well known brands...Quite keen on
their bi-fold door technology...just can't get
to see their actual product.

Just want to share my experience on Onitek....

Based on the review on Lowyat.net, I found their contact number and tried to call them since last week...

I am staying in OUG, based on the contact number listed in their website. I called the Puchong branch. The operator said that I called the wrong number.
Immediately I asked them, "Isn't this Onitek?" She replied yes, but they didn't supply bi-fold door in Puchong brach. Have to call "another no." without giving me the "another no." she hanged up the call.
Call back 2nd time to ask for the actual number.
They finally gave me the Taman Gembira branch number.

Called on Friday, Saturday a few times to the Tmn Gembira branch number. It is either no one picking up or it was engage.
(Business too good?)

Fine, tried to call again today. After a few times calling at 12noon, finally there is someone answered the call.
I told her that I am interested on the bi-fold door, how much does it cost.
She then answered in an official way by telling me depending on the size of the door.
Told her that I have an existing bi-fold door and would like to change to a new one. She explained she wasn't sure, as she wasn't involve in sales. Took down my number by telling me that the salesperson will give me a call.

3 minutes later, she returned the call and asked me to take down the salesperson's no.
As I was driving, then I told her why not ask the salesperson to call me or SMS me the salesperson's number.
She were paused for more than 30 second, and I even thought the were connection issue, have to hello hello...??
She then replied me in an entertained tone, said will SMS me...
Yet I still didn't received any sms from her. Nor any call from the salesperson.

I am so ready to pay them for a new door, why should I call them twice?
Why not the salesperson call me? Since he is taking commission for his service?

Had a very bad experience dealing with them.

Anyone care to share how much does a bi-fold door cost from them??
Is it both side also come with the printing? Or just one side?

This post has been edited by aXin: Dec 5 2011, 09:39 PM

I have called their Puchong office (from the website) and the lady told me that this was their store, no showroom. Hafta go near kuchai lama there. Called Kuchai Lama, say wanna see sample. She say no sample or showroom. I do not believe so I dropped by their office there. When I went there then I only understand.
-Onitek have no showroom in Klang Valley.
-The office is a sales office full of sales people.
-Onitek sell to installers who sells to end users like us.
-So if you wanna see an onitek sample door, you have to go to their installers that have showroom.
-I saw one of the installers display at Homedec (I think) WIT sumting.. (The door looks cheap)-maybe it was stuck to a filmsy plywood door thus not stable and it was non powder coated thus makes it feel very thin thus overall effect CHEAPO liao..