LOL.. Ur car really so terrible one har?? He only remap the A/F ratio isit? Does he remap the Gearbox gearchange controls too?? To match the gear shifts to proper speed ratio for maximum pickup?

Gf mana?? Go around somewhere mah.. Stay at home very sien one.. Go watch Meet the Little Fockers.

Roger. For me springs is much cheaper lah.. Rm160 for a set of APM Performax. Absorbers mahal sikit.

Can counter it mah.. Lower rear springs with taller ducktail spoiler.

Oh u stay near plentong one ah?? Me in skudai area. XD

Its very tough ady loh.. Look at the pic.. Surprisingly the interior cabin intrusion very less.. Just too bad no air bag only.. If not sure can save the driver..

Ok rev kaw kaw.. I still dont understand bout the faulty fuel pump part. That means the fuel pump cant pump enough fuel to the engine?
Mai mai come i help u.. U dont dare rev i help u rev..
Want to test how much improvements can be obtained from the tuning.

Psst.. PM me too..

Owh.. Yest i pour full tank.. Went for 140km ady. But my meter still show that i only use LESS THAN 1/4 OF A GAP!
Impossible FC so good.. And i fill till the fuel gun auto stop then i nvr fill anymore ady..

BTW Esso Mobil now got contest to win a Myvi.. From now on i will pinjam everyone my car as long as they pour petrol for me.. hehe..

Noticed it.. If u brake really hard or u are going downhill.. U magically have free petrol, but only to be taken away when u go back uphill..

LOL.. It still have to lah.. I wished i could switch off the engine and only switch it back on when its starting to go uphill.. XD.

I always search around automotive garage and ZTH marketplace there.. Probably can get a good deal somewhere there.
I want to install LED fog lamps first before changing my head lights..

Yeah.. Exactly.. Im getting the E-class ones.. Hella design.. Or probably the Audi A6 ones if possible.. Gonna cost a bomb though.. But hell its worth it..
So damn bright and i like the color.. Pure white.. Not the bluish ones..

No lah.. Merc E-class can put what.. Of cos mine also can.. haha..

Light behind the bumper as in??

Oh like those under car lights?? awesome.. HID sure wei,.. change ur foglamps for HID ones first lah.. But seriously i hate it lah.. Cos HID doesnt work with reflector style head lamps.. It scatters the light too much.. It only works with projection lamps..

Hvnt found any yet so far.. Im still finding for it..

When wanna meet up? I want to test ur car first b4 the ECU reverts to BLM 1.3.. hahaha..
Sounds like what Jacky did was merely just reset the system and choose aggressive mapping in the start.. He did not change the base map value or overwrite the defaults..
Oic.. Nothing major lah.. I thought the fuel pump cant pump enough fuel to the engine causing it to be underpowered.

LOL.. Happens to me too.. Where u misjudge the distance.. When u go to the workshop they just remove the bumper, straightened back the clips and fix it back.. In JB i get it done for free.. In KL, probably around RM10-20.. U can go to those bodywork shops to get it done.

The bodyshop can rivet it back in for u.. But the downside is once u have rivetted u cant remove the bumper unless u remove the rivet and re-rivet it back..

Yeah gila that fella..2K can get standalone Unichip Q+/E-manage Ultimate.. Even better than just changing the ori ECU basemap..

Rivet it from the inside lah.. U wont see it from the outside.. And rivets can be removed.. But then if u want to fix it back u need to have the rivet gun handy lah..

Yeah on the inside, but they will drill another hole beside the ori one and plug this in..
http://www.amazon.co.uk/Moulding-Mounting-...l/dp/B002WK0CEA
http://www.amazon.co.uk/Bumper-Retaining-S...l/dp/B002WJKUE8

Its cheaper than fixing the original clips.. Since u are going to change the bumper in 6mths time..

Yeah sort of.. Not too sure how its done though.. Its like they drill a smaller hole beside the original hole and use this rivet to hold it together.

TT sessions update coming up.

Coming up..

Maybe the SC might not give u a new bumper.. But probably they got a way to fix it up i guess.. Im sure they got a way to fix it cos they also do heavy repairs in the SC.

Nope. Im from JB.. staying near Kip Mart there..
Got reason to change to aftermarket who not happy wor..

Yeah u can just add on.. The window will become slightly thicker but its ok. Unless u are adding on security tint then i suggest u remove the existing tint first.
But current tints on the market are good enough ady. So i guess u dont need to put 2 layer tints and can remove the original tint.

But i see JB got more trees than KL.. haha..

Centre Of Service Excellence.. First and 2nd post got the details over there.

2nd post of this thread there i have put it all up there..

LOL.. Instead of buying full slick tires u make ur head slicker?

Yeah.. But he is busy till after CNY...

Well he is just trying his luck.. I dont think it would be any harm asking.. We dont need to stuck up with our ego just because we know we cant claim something. Who knows the SC might have some ways of repairing it back to original? We never know till we ask. As we can see from the pics he posted the bolt hole in the bumper has been totally ripped out.. This shows that its not just a simple job of bending back the brackets and just refit the bumper.. So lets put it to a rest here and see what solutions can fenrir0402 come out with first.

Erm go to Sunway area.. A lot of bodyshops.. I am free for the mth of jan (jobless). So if u want me to recommend some bodyshop then i can bring u around there..

Tadah Im back! Sorry quite busy since new year.. A lot of things to settle.

Yeah the pic shows the bumper bolt hole totally ripped out.. Must have been a big pothole and a real heartbreaking crunch when he drove into the hole.

Check and see if the red dot in the middle of the meter panel is blinking. If yes then close the door, lock and unlock the car.. Sometimes u turn the key too fast and the car ECU still blur blur.. Hvnt wake up yet.. Just turn it slower step by step..

Ur horse needs to breath once in a mth.. XD

Persona body with Ferrari DNA?? I love that..

LOL.. Ur car changed from Persona to Saga BLM ady.. haha.. I wonder if she complaint about the steering being too heavy..
My friend who has been driving a Myvi for 2.5years drove my car yest.. And she complaint my steering is so damn heavy compared to Myvi.. And yeah i concurred too.. Myvi and Vios steering are so damn light..

I always start my car in P. The only 1 time i had problem was when my car is in N though.. Thats y i always start my car b4 getting into it.

DIY loh.. Do u have the waxing machine? If u want to do it by hand its going be be tedious.. Then i suggest u go to professionals to do it.. Its only going to cost RM188.. For polish and wax..

Total i spend was RM240 for VS+GC.. He charged me for GC installation..

In my opinion for something that cost RM240, its not worth it.

1) Slightly smoother shifting.. Not noticeably faster at all.. But high rev (5.5k-6.5k) gear change is faster.
2) Air-con colder? Nah.. During really hot hot afternoon sun i dont feel it cools down my car any faster.. Still feels the same. In the morning though even the standard without VS aircon is more than cold enough for me.
3) Improved FC? Nope.. Its still the same.. In fact it looks like it has increased but thats cause i got stuck in more terrible, non-moving jam lah.. So cant totally blame the VS.
4) Improved low end torque? No, no noticeable difference even if there is. My IronHide feels exactly the same with and without it.
5) Idling, there is an improvement. Slightly lesser vibration from the compressor kicking in.. U still can feel the vibration. Only lesser.. But due to that u can hear the compressor more clearly as it kicks in.. Sensory deprivation i guess.. So u get lesser vibration, but u feel like the compressor is louder..
6) The headlights and meter panels STILL DIMS AS PER NORMAL when the compressor kicks in. Not even noticeable difference. But due to the louder compressor, when it kicks in u hear it, and u will more oftenly glance at the meter panel to check idling speed and u can see the dimming effects..

So for RM240 worth of dough to increase ur performance.. Nah.. I dont really see the difference.. I wouldnt recommend it to you.. I guess for the same amount of money to increase performance, u can change extractor to 4-2-1 which would definitely give better low end torque. Or drop-in + iridium spark plugs for more performance or save up somemore for a lightened crank pulley.. This would at least be guaranteed of a few extra horses from ur engine..

Friday afternoon? Awesome.. I am already there..