Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
129 Pages « < 43 44 45 46 47 > » Bottom

Outline · [ Standard ] · Linear+

Hobbies RC Flying Models v3

views
     
daddoo
post Jun 3 2011, 11:32 PM

New Member
*
Junior Member
39 posts

Joined: Jul 2007
QUOTE(QiW @ Jun 3 2011, 09:07 AM)
u sure u did not put in v2 main shaft ??
PRO and v2 main shaft is not the same ... not sure about main shaft for sport though ....
i have never heard of problems like this one ... coz the PRO main shaft for the ring where u put washers and it will not slip below the main bearing block


Added on June 3, 2011, 9:13 am

u can choose to use stock whip antenna ... that one looks like the one on your radio ... i have included those in .... but do not expect much performance from those la
the one on the plane is called a cloverleaf antenna custom made tuned to the frequency i use ... the one on the receiver is called a skew planar wheel oso custom tuned
these design has the best multipath rejection ... and oso u dont lose much video when u bank or go behind small object
u try with stock antennas and those antennas then u will know the difference

what i have now can go further than your naked eyes can see the plane laa .. hahahahahaa
i have never been a height flyer ... the longest distance i have flown with it so far is about 800m at 200-300m height
*
I am sure it is a Pro version main shaft.

Nvm lah, I have another problem now, the blade tracking a bit weird liao, at different throttle stick position sometimes it is tracked sometimes it is out of tracked. Suspecting the SF mixing arm because there is quite a lot of play when I move it left and right using my finger.

Qiw, yours one got this kind of play or not?

TSQiW
post Jun 4 2011, 12:52 AM

Casual
***
Junior Member
354 posts

Joined: Sep 2006
From: KL
minimal free play ... all nice nice tight tight .. hehehe
prolly coz i have not crashed it inverted yet .. hahahahaa


Added on June 4, 2011, 12:52 amminimal free play ... all nice nice tight tight .. hehehe
prolly coz i have not crashed it inverted yet .. hahahahaa

This post has been edited by QiW: Jun 4 2011, 12:52 AM
daddoo
post Jun 4 2011, 10:28 AM

New Member
*
Junior Member
39 posts

Joined: Jul 2007
Aiya .... fed up already. Originally that SF mixing arm already had small play and now it gets worse.

Stock parts not really so good and durable, hehehehhehe gonna try those clone parts and see .... Tarot one quite OK I think, or maybe Flasher .....
TSQiW
post Jun 4 2011, 01:53 PM

Casual
***
Junior Member
354 posts

Joined: Sep 2006
From: KL
cannot blame manufacturer if u crash ... coz anything can happen in a crash ... if they make it out of super strong metal and super heavy but will not damage so easily ... oso ppl will complain one .. hahahahaa
sLapshock
post Jun 4 2011, 02:36 PM

Getting Started
**
Junior Member
124 posts

Joined: Jan 2010
Flasher and tarot are good substitute, when you crash whether original or clone parts, it doesnt make either one damage less, its about compability when buying clones....
Dont sucked up to original parts too much...

But if u rich..wanna get original then go ahead, like me i cant afford original.

TSQiW
post Jun 4 2011, 08:48 PM

Casual
***
Junior Member
354 posts

Joined: Sep 2006
From: KL
so how mr shock ??
want the FPV stuff or not ??
if u want then i will start dismantling from my plane ... the vtx and vrx is still being used by me now
sLapshock
post Jun 5 2011, 06:18 PM

Getting Started
**
Junior Member
124 posts

Joined: Jan 2010
If its havent been on sale on July, i will get it from you. Now abit tight, because my engagement is this month.
TSQiW
post Jun 5 2011, 07:25 PM

Casual
***
Junior Member
354 posts

Joined: Sep 2006
From: KL
ok ... CONGRATS btw
put photo of groom and bride to be laa .. tongue.gif
davidfly80
post Jun 5 2011, 11:31 PM

New Member
*
Newbie
1 posts

Joined: May 2010
quite busy lately no time to mardi look for rc helicopter senior or expert there.i will try make it on this weekend.
TSQiW
post Jun 6 2011, 01:09 AM

Casual
***
Junior Member
354 posts

Joined: Sep 2006
From: KL
this morning got bad incident there
the heli sifoos there looking to stamp their control on the place ... hahahaha
daddoo
post Jun 6 2011, 07:14 PM

New Member
*
Junior Member
39 posts

Joined: Jul 2007
QUOTE(QiW @ Jun 4 2011, 01:53 PM)
cannot blame manufacturer if u crash ... coz anything can happen in a crash ... if they make it out of super strong metal and super heavy but will not damage so easily ... oso ppl will complain one .. hahahahaa
*
I understand this but when the heli is totally new it has some play already. Including the tail rotor hub and one of the blade grip ..... Just that the crash make it worse ......
But nvm lah, nothing is perfect ...... tongue.gif


Added on June 6, 2011, 7:17 pm
QUOTE(sLapshock @ Jun 4 2011, 02:36 PM)
Flasher and tarot are good substitute, when you crash whether original or clone parts, it doesnt make either one damage less, its about compability when buying clones....
Dont sucked up to original parts too much...

But if u rich..wanna get original then go ahead, like me i cant afford original.
*
Hehehe, I am trying this way actually. Went back to my hometown and there is a hobby shop selling Flasher parts. Got one pair of their mixing arm but it is not really cheap there, just about RM10 cheaper compare to the original one.

If later the clone parts are good enough I think I will switch to them also.


This post has been edited by daddoo: Jun 6 2011, 07:17 PM
TSQiW
post Jun 6 2011, 08:38 PM

Casual
***
Junior Member
354 posts

Joined: Sep 2006
From: KL
maybe some of the clone parts could be better
my PRO is the 1st gen ... maybe 1st gen has better QC ?? hehehehe
daddoo
post Jun 6 2011, 09:23 PM

New Member
*
Junior Member
39 posts

Joined: Jul 2007
QUOTE(QiW @ Jun 6 2011, 08:38 PM)
maybe some of the clone parts could be better
my PRO is the 1st gen ... maybe 1st gen has better QC ?? hehehehe
*
Probably tongue.gif
The price you paid for your 450 Pro is higher than what I have paid for mine ....

But strange, usually first batch is prone to a lot of quality problem and improving from batches to batches ......... hmm.gif
TSQiW
post Jun 6 2011, 09:54 PM

Casual
***
Junior Member
354 posts

Joined: Sep 2006
From: KL
its actually 1st batch of most things are prone to design problems ...
yup ... i paid much more than u for my PRO
daddoo
post Jun 6 2011, 11:19 PM

New Member
*
Junior Member
39 posts

Joined: Jul 2007
Qiw, do you believe if you upgrade those plastic tail parts (tail servo tray, tail bearing hub/holder, tail L link, tail pitch link etc) to metal it will improve your tail performance like your gyro gain?

I changed those and now i can reduced to another 10% gyro gain while the tail still hold solid, but not sure if it is because of these upgrades.
davidfly80
post Jun 6 2011, 11:54 PM

New Member
*
Newbie
1 posts

Joined: May 2010
what incident happen at mardi ? I dont understand what you said ?
TSQiW
post Jun 7 2011, 08:28 AM

Casual
***
Junior Member
354 posts

Joined: Sep 2006
From: KL
its ok david ... dont need to know laa .. hehehehe

mr daddoo ...
yes i believe .. coz align plastic parts can wear out pretty quick .. the clones have a lot of better metal parts to put in the PRO
even my rudder control rod has been modded to CF ... hehehe
daddoo
post Jun 8 2011, 09:15 AM

New Member
*
Junior Member
39 posts

Joined: Jul 2007
In gyro HH mode, usually when the slider moves to either end it will bounce back a bit and then stop totally. But if before it stops then bouncing back and forth a little bit then only stop is this a sign of stripped servo gear?
TSQiW
post Jun 8 2011, 10:51 AM

Casual
***
Junior Member
354 posts

Joined: Sep 2006
From: KL
maybe your end points too much .. mine does not do that
do not move your stick until slider touches the end .. u should stop b4 it touches the end ... if u do that u might get some servo binding at full stick rudder
i set my end points (using gp750) about 0.5-1mm b4 it hits anything to be safe
daddoo
post Jun 8 2011, 11:19 AM

New Member
*
Junior Member
39 posts

Joined: Jul 2007
I am following the way you are using actually, I was doing all these things without spooling up the heli and found this issue.

There is no binding at all because I can hear the servo buzz if it is. It is like when I move full rudder stick and release slowly, then the tail pitch slider will jitter a bit before stop. So back to the question, could that because of a stripped servo gear ar?

This post has been edited by daddoo: Jun 8 2011, 11:23 AM

129 Pages « < 43 44 45 46 47 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0340sec    0.14    6 queries    GZIP Disabled
Time is now: 3rd December 2025 - 06:29 AM