Got my t8fg 14ch tx.

Qiw u use lipo? Which lipo did u get from?

---

Added on July 12, 2011, 5:02 pmAm i able to save memory and planes without inserting the memory card or u beed to have memory cards? Which in other words... Memory card is only to be used to transfer models?

This post has been edited by sLapshock: Jul 12 2011, 05:02 PM

u can save up to 30 models without the use of SD card i think ... or is it 20 models ?? hehehe
but u will need to have so many models to save in the 1st place la .. hahahahahaaa

i am using this lipo ... http://www.rcsmart.com.my/webshaper/store/...roductItem=2791 .. so far so good .. around 1 yr already i think

why is it ALIGN sells their TREXes more pricier compare to our own LHS?...(eg: RCSmart)....

This post has been edited by cpmboy: Jul 12 2011, 11:23 PM

Those are just for taiwanese .... Local sale in taiwan only.
But i do agree that the prices after currency conversion are cheaper here in malaysia.
Anyhow, compare to other country like US they are actually spending much more lesser than us to buy heli or parts. With the same earning amount (maybe higher than us), they pay a few hundred to get one 450 only .......

Just dismantled the 250 heli into pieces, damn the conditions of the parts really freak me out, have to replace around 30% of the parts i think, that's a cost to buy one brand new clone already. No more second hand heli in the future already unless i know the seller very well .........

yup true...the sze of the currency does play a role here....freakly little 250 u got there bro....

did i not say u almost always get what u pay ?? hehehe
we live and learn lorr .. sometimes we have to pay to learn oso

cpmboy ... can hover properly in SIM yet or not ??
hover = stationary without the heli jumpipng all over the place and u can move the hovering heli to roughly the position u want
and oso in different orientations .. hehehe
if u can ... then it is time to do the real thing soon .. hahahahaaa

Mislead by the seller because he put "almost very good condition" ........
My bcp condition is better than this 250 when i sold and yet i dun dare to say like that loh

---

Added on July 13, 2011, 8:42 amForget to say, that heli still can lift off and quite ok lah. It was my mistake to get the false reading of the collective pitch with that super duper sloppy head.


This post has been edited by daddoo: Jul 13 2011, 08:42 AM

Hmmm, i dont know if its worth to put my 6208sb receiver in my trex 250... 8ch on a heli??????

Haha, if you have no other places to use then why not use it on your trex250?

i think im using clone rx on my trex250 la..ahahahha

clone rx more than good enuff for your helis laa ...
u can set the clone rx for high speed ...

well bro....for 2 days in a row..finish practising and doing the Finless Bob's hover challenge 1....tail-in (30 sec), tail side (left/right) 30 secs & nose-in (30 seconds) hover...and landings (some crazy one...i even tried autorotation).....dunno bro....my dino is waiting caged inside my cart ..........wish me luck...

This post has been edited by cpmboy: Jul 13 2011, 12:25 PM

i forgot ... u have to master your landings too .. hehehe
otherwise tipping over in landings will result in time and $$$

u got tat right...well...might use the training kit also he he..so tat my upcoming heli looks like a drone...

for my 1st heli build (I opt 4 trex 450 pro@sport...later lah) ....I am first looking at what tools and supplies I need for the build.
I wanted to know if I should use the thread lock that comes in the kit or if I should buy the thread lock separately, same thing for the grease in the thrust bearing and auto hub....your guys building experiences are needed here.....

This post has been edited by cpmboy: Jul 13 2011, 02:34 PM

hi,

im a newbie to RC helicopter. I just bought my RC helicopter last week and i dun really play with it much jus some practice on hoping n landing (not until 2 days, operate for 10 mins maximum for a day as i was busy). on the third day i try to operate after a full battery charge the heli fly as usual for 15-20 seconds then suddenly drop down...i was quite disappointed as i had spent about RM150 on it. My controler part is ok i did not do anything it jus drop down like tht.

after a double check i notice tht when i turn it on the LEDs arent on - thus no power n the motor will not run simply because no electricity. But the battery was fully charge, i did dismantle the case n see wats wrong. What i did was turn the switch on for 5 min n i notice some components like the capacitor were hot so as other parts like socket plug to LEDs and no doubt the battery was a bit warm too.

Anyone here can give me advice? The model is Phantom-15 gyro heli

This post has been edited by TeddyBear00: Jul 13 2011, 04:28 PM

Get lamav3 or v4

---

Added on July 13, 2011, 10:15 pmQiw, what did you put for timer st1 and st2? U use both? What are they for?

Currently my throttle hold is on the SF, which is my timer stop for st1 too. My start/reset is SH.

Im not sure what st2 are for or do i really need the stop function.

This post has been edited by sLapshock: Jul 13 2011, 10:15 PM

u actually need only 1 timer .. the 2nd timer is extra and u dont have to use it if u dont want
eg.
1st timer set 2mins ... this one for rempit style flying
2nd timer set 4mins .. this one for normal relaxed flying
so when i get my plane up and rempit kow kow i know to come down on 1st timer ... if i just fly relaxed style then i know batt can fly for 4 mins so i come come 2nd timer lorr ...

mine is set to follow throttle stick ... once i am over certain position (1 or 2 bar from bottom) the timer starts coz thats the time where u start sucking the batt .. no throttle = almost negligible consumption
same goes for my heli coz u almost never hit full negative pitch to stop the timer and even if u do it is for a very short while only
my 2nd timer is set to my idle up switch so i know the longer i stay in idle up mode the faster i have to come down ....

Wow thats even better. Means your timing start only when you have throttle input and when you let down timing stop and resume once again when you input throttle?

Is that possible? Coz i play glider, sometime throttle off and glide then throttle on to climb.

Hehehe, try that on your Tx loh, since you have the thing with you already
Slapshock, you still buy things from heliguru? That shop big or not?

This post has been edited by daddoo: Jul 14 2011, 03:16 PM

definitely no problem la ... u can assign the timer to start with any switch or gimbal position
set the stick position u want the timer to start at ... done !!!