ngeh3x......    i like yg first tu..

Anyone here tried the nanomist before?
Does it really helps to cleanse the odour inside ur car and the air-cond blower?

nanomist

tettttt ure wrong...eventho u send to psc n something happen later on it is actually quite a hassle to claim from them...of course u can say u change the belting etc with psc but later they would say it is caused by something else and if ure lucky they would say ok they replace the part but charge labour work from u...in the end sama je hantar PSC ke hantar bengkel ayam ke kalau nak jadi tu tetap akan jadi...at least hantar bengkel ayam tgh buat keje ko leh menyebok dok situ tgk btol tak diorg buat keje n klo rasa x konfiden soh dia buat sampai btol2 puas ati...anta PSC tinggal kunci lepak lounge pomen dia bawak kete tu ntah ke mana ntah2 pegi lepak makan dulu ke apa ke tau2 kete siap...aku tau sbb aku keje proton n dulu ada membe keje service center ni...

aik marah bunyik bro...jgn marah2 nnt x hensem cam aku

anyway aku reply base on :

About PSC,if they done something wrong, u can make complaint n maybe if the fault is really on them then for sure they will be responsible coz all the work that they have been done to your car, they will record it unless the mechanics really sengal..

tu sbb aku ckp sama je anta luar ke anta psc ke klo bende nak jadi tetap jadi n time claim sama je kene bertegang urat gak...psc ada rekod dlm sistem...bengkel luar ada rekod dgn receipt...not necessary diorg akan take full responsibility tak kira la psc ke bengkel luar ke but psc u pay more la n not necessarily the mechanic in psc buat keje bagus...kadang2 diorg ni nama je trained technician tp masa product briefing dtg pagi tunjuk muka sign attendance lepas lunch ilang  g mengulau...tapi x semua la ada gak technician yg bagus...

pastu klo ko hantar kt psc yg besar2 contoh COSE atau kt semban psc seblah giant tu mmg diorg xkan bagi ko masuk dlm tgk diorg buat keje...contohnya kt COSE dengan kete belambak keluar masuk ko just bole dok perati daripada jauh tgk thru glass window...

mcm aku rekemen pomen aku tu sbb mmg dia sendiri pakai campro...dia sendiri rnd bende2 yg dia nak buat...n dia konsentrate on campro engine walopon engine2 laen dia bole jugak buat tapi dia lebih byk amik customer campro...

so tepuk dada tny selera...aku bkan nak kondem sgt PSC ni sbb kalo aku ckp lebih2 org dalam marah kata x support proton la sesama proton pon xnak support tapi aku cakap based on direct experience...

satu lg klo warranty da abes siap sedia la nak dgr harga yg super pekak especially bila engine jem...aku mmg xkan mampu la nak anto kt psc aku just anta psc klo nak cek pdt je tu pon kt bengkel kawan aku...klo x mmg aku pegi jumpa ayam je la hahah

Mana nak repair windscreen area KL ? (tengok google ada Dr Cermin @ Jalan Pahang ngan Jalan Pandan) ... Tapi tak tau rate berapa.

Pagi tadi tengah sedap2 pecut, batu datang dari mana tatau kena windscreen .... 2 bijik pulak tu .... nasib tak pecah windscreen ni .... Nak kata lori, takda lori pun. Suspek ada orang balik batu ....

Jadi kat highway plus headed towards KL few km lepas rawang exit.

tettttt ko salah lagi...

sebis tuka minyak itam semi sintetik eneos molybdenum RM110...minyak rm30-rm40 aku amik kire klo minyak parak cam aku RM10 dpt 50km je max...tol rm20...total rm170 and aku still rasa competitive la dgn harga luar...klo da kamceng dgn pomen dia blanje makan worth rm10 hahah...dtg bole gelak2 bole maki pomen bole belajar mcm2 drpd aku bodo tatau pape pasal campro sampai skang...satisfaction PRICELESS...

ahlong rilek je dari gombak dtg tuka minyak itam...ada bdak persona dok balakong rilek je turun semban sebis minyak itam...ada bdak gen2 cps dok putrajaya rilek je dtg semban adjust fpr n tune campulley...paling best ada je bdak cps melaka dtg semban semata2 nak soh aku pasang plug padahal bkan xle tggu aku pas kt membe kitorg nnt bawak balik melaka pasang aaa...alasan dtg jauh2 boring jln jauh dpt makan angin...wahkahkahkah...tepuk dada tny la kt mana nak sebis...

PS: klo sebis minyak itam barang semua bawak sendiri pomen amik upah rm10 je...x mahal mana pon

---

Added on February 22, 2011, 4:49 pmklo x teruk sgt bole tahan sebulan 2 lagi n polisi insuran x kover ko g topup dulu insuran...pastu lepas 2 bulan ko g claim...

Rugi la kalo ai yg dekat ni buat sumbung buduh takmo pi jumpa pomen power ni ek...x gitu kanda? huhuhuhu...

Eh...buat extractor tu kat dia ni jugak ek?

Kalo nk contact dia...tanya pape just mention ur name bley ka kanda? 

oh btw,

ATF oil 4 liter kan, dlm rm 22 x 4; labour charge selalu berapa ye? 

oh... nowadays less than rm18 is imitation, more than rm21 is genuine

ATF need 4 n half bottle for gebox w/o ATF cooler. 

oh ok bro. spare part shop near me rm22 for ori proton ATF
xde tulis labour ka? 

Which one is the better semi-sync oil?
Petronas or Shell or any other brand?

Btw, if buy own ATF, which Proton SC will change for you?

Thanks for info. 

Last round they give me Petronas Syntium 800 15W40, pedal feel so heavy...
Mind to share your's?

Any recommend Proton SC in Seremban area? Need it for 25K service.. 

changed my atf oil with ori proton. rm22 x 4; then buy a dextron III rm13 cap ayam to do the flush.

according to the mech, my atf oil still ok, but i want to change liao coz oredi more than 40k km

total = (rm22x4) + rm13 + rm12 = RM113

actually that mech ask rm10 oni, but i give more la..  good workmanship!

bro edi78 and m2m2605 and others who know....

any good shop to ketuk dan cat around bangi??not my car,my friend's car..MyVi SE...
side skirting langgar road divider masa corner...i think no need ketuk, jz sand it (to let it smooth...dunno right term or not), put body filler and sand it till smooth, spray and glaze...

p/s: nasib baik ada skirting...if not need to ketuk...haha..

campro stendet aku ni pon org sakit nak keja...watpe nak turbo? perghhh ayat riak sialllll hahahah...2009 ye la laju...masuk 2010 mula stendet...skang makin stendet...adoi aiiiii kancil potong pon selambe je hahahaha