ebay got 1 selling rm650.. its ok what.... better grab b4 its too late

quite hard to transform this vf171ex due to tight joint around the diecast area

^^ broken piece by the feet?

nope, that piese is cover for figther mode, when in G or B mode need to take it out to enable hand push out

I am having hard time in getting it hand back to position from batteriod to fighter.

Get a tweeser?

phew from my 1st impression of VF171 EX transformation really unfriendly and kinda prone to be break due to i must use force to move all the stiff joint part. I think i better off putting it at fighter mode forever, changing the batteriod to fighter is a pain in the A$$.

Totally agree. I thought I gonna break this in some stages. Did your wing pegs fall off easily?

And yes, I used the small hobby screw to push the connector tap up during the transformation from gerwalk to battoriod.

This post has been edited by Impulse10: Aug 16 2012, 11:25 AM

Anyone got the renewal armor packs yet? Post some pics plz!

Hi,

just finish my 1/72 mascross Ozma. But the plastic too tight, & when i turn it (with careful) it broke. The broken plastic part r in both leg joinment.

So, do anyone face this problem???
Do 1/100 or 1/60 (Fix figure) have this issue??

The jet mode r very tempting compare to the battlroid mode.

For 1/60 those parts are metal so it wouldn't happen (at least no complain up till now).

just got mine yesterday now trimming going to be painting it got any tips anything to watch out
anyone came across 1/72 VF-25F Armoredmessiah Alto Custom kit in store?

hlj have sales for vf-11b again

^ thanks for da up

I apply topcoat after the water decal. When i tranform, the yellow & black decal scar .
I need to remove the part of decal & re-topcoat

wow thats really bad. Have you replaced the decal with the normal decal? Currently i m painting it..I ll try adding some floor polish on that decal later on before top coating them

This post has been edited by unpronunceable: Aug 27 2012, 08:48 PM

Haha,

since the water decal & the leg part broke, i already no mood to do. The dry sticker just keep it for future use.

BTw, a topcoat for the macross plastic already cantik (the white & grey part), except certain small part u may need to paint it instead of sticker.




Good luck.

yamato reiisue 1/60 fast packs vf-1 come Oct!

for owner of yamato 1/3000 scale sdf-1, does it come fully painted or only with decals?

U can read at Macross World Forum for these ppl own it fully assembly one (plain painted not so attraction to ppl eye) what they all do is custom re-paint it. There are ppl own yamato 1/3000 scale sdf-1 the kit one which is self assembly.