voltage the lowest it can do? well.. 955 i fogot already plus older deneb perform different, true x4 perform diff and also unlocked x4 also diff..

but somehow i have a feeling that 3.6ghz is doable with stock vcore..but ur vcore not that high either..to gain 3.8ghz, i think <1.45v..

that winova u bought from hope-remember right? mine is good woh.. try tweak more..

Hey. I have never thought of that. How do you do memtest. At the start of Bios? Or using software?
Awesome man   That's what I'm talking about. How did you do that? And with 1.344v sumore

You have my out most respect

Btw, I stopped playing with Multiplier and tweak the FSB.

I'm now running 212FSB with Multiplier at 17 which gives about 3604Mhz.

I clocked my VCore to 1.425 to give it more stability, maybe lower it when if it works.

My HT link now is at 2120Mhz and my ram clock change to 706Mhz.

Will Prime it and see whether it will survive 5 mins

The thing is, electronic components don;t normally have wear and tear like mechanical components. But I suppose it has something similar though. Normally electronic components will fail completely if its time.

And you're lucky if your PC suddenly shutdown or unable to boot. It means that the PSU fail safe is working and it kept your other PC components from being damaged. Cheers to Enlight
Do you still have the old Enlight you mentioned, I'm sure it can be repaired.
Well, given their price I'm would be really really surprised if they give cheapo components lorr. They HAD to give extra large capacitors and extra powerful transformer and extra quality IC's if they want to supply more power to the PC.

I see I see..thanks for the info bro. By tight timing you mean 7-7-7-10 or 10-10-10-20?

I'm setting my ram at 9-10-9-25 @ 1410Mhz. It pass the first round of Memtest so it should be fine i guess. Normally u Memtest the RAM timing to determine the stability?

get winovava 8gb... can do 1600 @ 7-7-7 w/ 1.62v... not bad + berry affordable.

i think it's normal, larger ram on a stick = higher d latency...  or something like that if i'm not mistaken... 
8gb kit ah bro? trfc must be 160ns regardless 4/8gb... 

Latest RAM Timing.

8-9-8-23-30 @ 1.6v  /  FSB:DRAM = 3:10

MemTest pass 1 round. No error found.

Prime for 15 minutes. 2 sessions. Success.

Looks like OK. But is tight timing faster or slower?  So far I'm quite satisfied with my current clock and configuration
Do you think its possible to push 3.8Ghz with this RAM timing? Now running stable at 3.6Ghz  

Have modded my casing by adding another 12cm intake fan. Have to take out 3 DVD Bays to do that. Looks ugly but it works.
Temperature is lower by 8c

Yea, should have done that a long time ago..the best part is, I'm only using double-side tape to secure my fan onto the DVD-Rom bay  

I'm gonna get a good 8cm fan for my exhaust next. The one I'm using now is so freaking weak. Totally cannot feel any air coming out.

Woah..I wish I can put 12cm fan but unfortunately the screw mount and exhaust mesh is only for 8cm fans.
Haizz...I'm saving money to buy new casing. Always wanted a CM HAF series, gonna get the HAF-X

later i will change
ade bajet trus sapu 212+ 

a quick suicide run
bet it wont past a minute on prime95

Hehe. HAF 912 not big enough. I actually like 922 alot of the design is a bit outdated, interior is not black and the side transparency is not big enough. Waiting for a replacement for it
Haiz..I don't think I can runt my 955BE at 4.0Ghz. At 3.74Ghz the temp at full load is nearing 55c, almost hit the heat wall edi.

Btw, 1 noob question, did you guys enable or disable AMD Cool n Quiet while OC or Priming? I always leave it on..

Nvm. I still got my old mobo, just in case
I see. On is better cause I'll leave my PC on sometimes to DL.

I see. But since its not giving me any problems I'll just leave it on for now. Only if it kacau me then I'll turn it off 

Vimc?
wht is tht?nb?
sos plz

vIMC maybe labelled differently for different manufacturers in the bios...my gaygay board shows as CPU NB Volt

what i read,max is 1.5...

http://www.techreaction.net/2010/10/14/phe...clocking-guide/

ram instability,increase cpu-nb volt
imc instability,increase cpu-nb volt...unless i read it wrong...
telltale of ram n imc instability...bsod...correct?

thts the higher nb?
lots of timing change from stock

maxed out on the cpu nb vid?

reverting back to previous bios...wish me luck...or send donation    

not every single mhz needs volt..

let say older deneb x2 can do 3.1ghz to 3.6ghz with stock vcore
regor is like 2.7ghz > 3.3ghz with stock vcore

for thuban, 1.4 is >3.8ghz already and 4ghz possible..

Bro. That AIDA64 you use is for what?