Try using RivaTuner, and setting different clocks for the 2D mode and 3D performance mode.

. Open RivaTuner, ignore any warnings about incompatible graphics driver, then, the main screen should appear.

At "Driver Settings", click the button on the right, then press a picture of a graphics card.

An option to set the clocks of your GPU should appear. Enable "Hardware level overclocking". It will ask you to either reboot / detect now. Select detect now, or if you'd like, you could reboot your PC.

There should be something called " Standard 2D" below the 4 tabs, which are Overclocking, Fan, Compatibility and Overlay.

Set a clock you'd like for Standard 2D, save it, and tick apply overclocking settings at Windows start up.

Then, click on the Standard 2D thing, then press 3D performance, set a clock rate for that, tick apply overclocking settings at Windows start up, then apply, if it says anything related to conflict or something, just ignore it, save, and it should work .

You entered the wrong page in Riva Tuner.

I'll add a few screenies for you.

First Step :


Second Step :


Third and last step, set your overclocking values you desire here.


What did you press to enter the wrong place ( Low level system tweaks )


This post has been edited by TDUEnthusiast: Oct 1 2010, 01:30 PM