Phenom II 955 temperature
|
|
 Sep 24 2010, 09:44 AM
Return to original view | Post
#1
|
 
Senior Member
1,304 posts Joined: Jan 2009 From: Kuala Lumpur  
|
u should worry more about the core temp though, cpu temp is usually the socket temp, not the cpu.
Added on September 24, 2010, 9:50 amand try keep it below 62C This post has been edited by GothFebrio: Sep 24 2010, 09:50 AM |
|
|
Sep 24 2010, 01:49 PM
Return to original view | Post
#2
|
|
Senior Member
1,304 posts Joined: Jan 2009 From: Kuala Lumpur
|
QUOTE(buraqdunia @ Sep 24 2010, 01:10 PM) may i know about that more? my opinion is, i can make 1 core usage 100% using prime95. if 1 core that high, my cpu temp raise about 2 to 5 degree. if, prime 95 used by default setting, 100% cpu usage will distribute evenly between each core. each core do less. so, core temp always show less then cpu temp. so, my opinion again if wanna bring heat down usually i look the bigger figure. so, the bigger temp is cpu temp. refer = cpu temp worry = core temp core temp high = cpu burn Added on September 26, 2010, 12:09 pmjust bought a hyper 212 plus yesterday, i have to say its really a good cooler, (this result is with 2 fans, refer siggy) my cpu(refer siggy) temp: (cool and quiet off, c1e support off, cpu vid 1.4v, 3.6Ghz) idle 39C, load 48C, room temperature(no aircond) (cool and quiet off, c1e support off, cpu vid 1.4875v, 3.8Ghz) idle 42C, load 54C, room temperature(no aircond) This post has been edited by GothFebrio: Sep 26 2010, 12:09 PM |
|
|
Sep 28 2010, 07:27 PM
Return to original view | Post
#3
|
|
Senior Member
1,304 posts Joined: Jan 2009 From: Kuala Lumpur
|
QUOTE(deric88 @ Sep 28 2010, 04:04 PM) what Thermal paste you using and how u apply it? i use the thermal paste given, i just put lines between the pipes(something like this, the last one, http://benchmarkreviews.com/index.php?opti...1&limitstart=5)make sure the srews are tight and in a correct position 
|
| Change to: |  0.0195sec
 0.48
 7 queries
 GZIP Disabled
Time is now: 20th December 2025 - 03:36 PM |
Quote