i think both of them are the most snappy and stable rom so far for Eclair.
Using it with voodoo lagfix, there's no more lag, and GPS locked down within 10 seconds, pretty amazing.

nope just remove, then flash voodoo. As easy as that, but if you want to flash new firmware ontop of voodoo, better read the official site for FAQ

Go for it! Almost all the apps open in less than a second, super smooth.

Its how it should be in the first place

its the same thing.

Make sure you REMOVE any other lagFixes before that.

Very simple steps, place the voodoo zip files in INTERNAL sd card, rename it to update.zip

go to recovery, apply update.zip

there will be cool voice to assist you, wait for it to finish, done. =)

don't! voodoo don't work on froyo, so don't do it on JPC

Go here http://www.samfirmware.com/WEBPROTECT-i9000.htm

Find which firmware you like, i'd recommend JM7. Read first page of this thread about how to flash firmware, re-flash it.

just flashed voodoo beta 4! better auto brightness and no more CPU locked at 1ghz bug. and as usual, silky smooth~

Voodoo beta 4 gives around 1.7k quadrant as well, must be something went wrong on your side

Voodoo lagfix doesn't require you to root =)

Just go here http://project-voodoo.org/download , download the update.zip

put it inside your internalSD, rename it to update.zip

go to recovery mode, flash update.zip

wait for few minutes to startup, voila~ you got super fast SGS now.

much better

OCLF starts to lag when you install alot of apps, and it lags like HELL when you installing an app.

voodoo is just much smoother in every way. Try it.

BUT first remove your OCLF before you apply voodoo

quadrant is around 1.7k only, but it does not represent real life situation.
last time i used OCLF it gaves me 2.2k+, but still lag most of the time

I'm on JM7

no need unroot

yes wont gone.

hmm, strange. Nvr faced this before. Maybe you pressed wrongly? or try to flash new firmware then.

go here. http://project-voodoo.org/installation

use the update.zip method, is much easy. Make sure you re-name the voodoo zip file to update.zip

refer to first page of this thread, there's a tutorial, use 512.pit instead for JM7

Did you unplug the cable without dismounting SGS from PC? I got that once because i did that.

pull down notification and dismount from there, dismount from PC doesn't work

maybe is your firmware screw up? try go download mode and re-flash a brand new firmware?

tell me the steps you took

Put your phone to download mode (hold down: volume down, home key, power)

DO NOT plug in your phone yet, Odin / driver does not like it at this stage.

Start Odin3


Click "PIT" button and select s1_odin_20100512.pit file.

Click "PDA" button and select "CODE_I9000XWJM7.tar.md5" file.
Click "MODEM" button and select "MODEM_I9000XXJM3.tar.md5" file.
Click "CSC" button and select the desired version "CSC_I9000???JM?.tar.md5".

Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.

Do this and see. Don't touch other settings, not neccesary

JM7 should have, i rmb i got 3 files

How many files you get in the zip file u downloaded from samsungfirmwares

Doesn't matter, just choose one. Or choose something close to what you're flashing