how to make the cable tidy with this PSU???

Taking out the Core 2 Quad and Mobo



Core i7 930 Processor and Asus P6T Mobo



After Finish Installation with old PSU



After Change the PSU to Cooler Master Silent Pro 1000W Modular PSU



Cable Management with now PSU









This post has been edited by rcwh2000: Aug 28 2010, 08:51 PM

you can get some idea from this thread bro...

http://forum.lowyat.net/topic/1202012

CM SP 1000w u using is modular right???no use cable dun plug it in...

i already minimize the cable that i didn't use except the pci-e cable that spare for SLI upgrade....

cannot hide behind casing?what casing do u use?never see that b4

Yeah,that is fully acrylic case..what brand?..or u just customize it?..

route cable behind the board

not sunbeam... i think is china made....

---

Added on August 29, 2010, 11:01 pmbehind the board???? it won't affect the mobo???

This post has been edited by rcwh2000: Aug 29 2010, 11:01 PM

i dun think behind the board got enough space for those cable...haha alternative way..change casing...got some interest in transparent casing...

got any recommandation??? i need at lease 5 x 5.25 inch bay at lease...

emmm to save the headache..i suggest you get a new casing with cable management in mind............


CM got some low end casing with cable management provision in mind,...
u will be surprise how easy it is to do cable management with casing like this........

i don mind to spend around 400 for the casing... just that i need 5x 5.25 inch bay for future upgrade... hehehe... mind to intro???

-Cooler Master CM690 II Advanced with Transparent Panel ~ RM 329

-LanCool DragonLord Dark Ice K62 ~ RM 379

-NZXT Hades Crafted Series ~ RM 379

in the range...LanCool DragonLord Dark Ice K62 is......

+99999999999999999999999999

thats a damn good case man.....

sometimes i wish i have it oso....lkuckily i got lian li already

haha mADmAN u also support me right? just the outside appearance aredy very seduce me...

thanks for the recommandation... how about HAF 922???

A case with rubber grommet is better for cable management, so I recommend NZXT Hades Crafted Series

This post has been edited by Pis: Aug 31 2010, 09:44 AM

does not matter much...as long there is a provision for cable management.........
i have used K62 and Haf X in 2month period...both with and without rubber grommet.......

Already Change to Silverstone PS-03B-W...





















Uploaded with ImageShack.us

better cable management than ur acrylic casing

look nice huh, the silverstone casing is alu casing?

The window panel you customize yourself?

bro, if doing cable management have to remove everything? my HAF-X needs some cable management

Yea is better and the acrylic casing i change to my previous P4 System already.... coz is more suitable...


for my casing not alu casing is the cheapest silverstone casing


the windows panel is come together with the casing...

if like my style i don think u need to remove everything unless is space limitation... i don think HAF-X is limtied space rite??? so u do the cable management straight away...

for me ur cable tight job really nice & tidy/awesome....
really inspire by ur job..congrats...

thanks bro.... if interested we can form a gathering with this issue to discuss about cable management.... hahaha... by the way i'm in puchong and serdang area...

Where you purchased the casing at? I couldn't locate one which includes the windows panel

Mind sharing some details?

try garage sales section

i try before but can't get it.... actually i get it at ioi mall puchong near it center there... but i forgot the shop name already... coz i seldom buy at there... and i throw my receipt away already... but the shop is beside the pantai remis cafe at it center in ioi mall puchong.... u can try to ask there...

nice cable management, bro....
all put in queue place..
the silverstone case is similar like my CM HAF922..

Thanks bro...

HAF 922 the harddisk bay is facing the side panel rite??? if facing side panel i think cable management is more easy...

haf-x good for cable managment..i dont think need to remove all..
it will delaying ur managment.

yup, but ur cable management for the hdd is fine, look same color with psu cable and the inside of the case.

what i do is just go below the HDD then tie 1 round at the HDD cage.... then u will not see any cable unless the connector only....

acrylic casing u hide the cables in whatever way still can be seen.


1. use small black cable tight
2. use black cable sleeve.

This post has been edited by SkywalkerxX: Oct 31 2010, 11:39 AM

with ur casing, it is hard to hide the cable~~

yea but since already change the cable then i don mind already unless the silverstone can't do cable management...

---

Added on November 4, 2010, 9:14 amAfter Do the Sleeving on PCI-E 2.0 Cable.











This post has been edited by rcwh2000: Nov 4 2010, 09:14 AM

hm... mind sharing what sleeve u use? can hold 8 cable to gather + so long .... omg
spend more time and sleeve each wire? and is it needed to use cable tie with sleeves,the double heat shrink ( wire-heatshrink+sleeve + heat shrink ) not working?

and some amazing picture here.http://psychosleeve.com/

This post has been edited by MidTower: Nov 6 2010, 05:30 PM

actually i buy the sleeve at pasar road... but is quite expensive... those 4 cable is almost spead me around RM 60 for the sleeve and heatshrink...

i spend around 4 days for sleeve the wire and somemore halfway i broke 1 of the connector so i need to order the connector to complete the project and change all the connector... roughly the whole project for costing is around RM 100.00...

if u use cable tie to tie 1st then the sleeve won't expend after u heat up the heatshrink... so i perfer to tie up if u don want u also can try without cable tie... coz when i start do i already try both method....

happy DIY

yea after sleeving then relise its cost quite a lot, but worth it if it turn out nice, also sleeved my casing, used 10++ hr. but still left some work. and my lamptorn sleeving kit cannot even plug out 1 psu cable rm50 gone , molex also female fail. , found out that stapler can be use, but more time consuming, so what kit are you using?

i'm using stapler to remove it but just the PCI-E 2.0 cable only... other i didn't do sleeving coz is very troublesome.... then i just do those easy to see part...