Just got this Wifi modem router from streamyx after i upgraded my package. I having problem that i cant detect the Wifi after i have done the configuration. Wifi light show up. I tried to restart the modem and i was able to detect the Wifi, but when i try to connect it, it will lost signal and cant be detect anymore..Anyone out there having this problem too?

---

Added on September 1, 2010, 5:16 pm no answer

This post has been edited by i1u4ever: Sep 1 2010, 05:16 PM

I just got the same modem from TM today to replace the faulty Riger DB108-WL.

Use Open network authentication mode:



Then, set your default network key number 1 (taking my example screenshot) for your SSID setup in your WIFI client

This post has been edited by eclectice: Sep 4 2010, 05:16 PM

may i ask, for the country, is Malaysia already stated there? why I don't see Malaysia on the drop down list?

same configuration i did with with my modem.. but still having the same problem.. i think i wanna go TM Point and change modem.

It's kinda strange to hear the missing "MALAYSIA" option in the list...hmm..I am still hacking this modem to know what it is capable of...there are a lot of options in this modem which are quite interesting to me... one of them is that it exposes your modem router admin page (port 80) to Internet if you use dynamic DNS name feature.

If you google "Innacomm W3400V Wireless Modem", you will see a lot of modem router pages with the result query like below:

"Innacomm W3400V Wireless Modem Modem Username: Modem Password:"

This is funny since the exposed services are set for LAN side only and not for WAN side. The only exposed service set for WAN side is the ICMP protocol. This is probably used by the "support" account. Even though it will deny you access from WAN side, having the router page exposed to WAN side is not good. The best way to avoid this is to enable firewall setting to the WAN side on the port 80 or to port-forward it to an unused local IP address if you are not using it.

Other risky approach is to enable "LAN-side firewall" option. Unless you have set at least one IP address to pass-through the router LAN firewall in the IP filtering section, you will be totally locked out from your own router! If it happens, you need to reset your router and reconfigure it.

Another serious problem is that there are three accounts: "tmadmin", "support" and "tmuser". If you know the old passwords, you can set new ones. But, I wonder what is the default password for "support" as the other two are quite obvious and need to be changed.

This post has been edited by eclectice: Sep 6 2010, 03:06 PM

Anybody happen to know what is the default modem username and password.
Im trying to enable UPNP(if it has it) or port forward this modem at my uncle's house and he doesn't know what it is

EDIT: NVM found it myself. It was in the user manual >.<

This post has been edited by Molossus: Sep 8 2010, 06:52 PM

@ eclectice

I've my w3400v configured as such but my laptop cannot seem to detect the wireless, although my desktop which is connected straight up to the w3400v has no such problem. Help!

OTOH which wireless router model is a good replacement for w3400v and what's the highlight of the recommended unit??

agak2 berapa jauh signal ni bleh pegi klu guna modem ni?

hello,
i also got the same prob i follow eclectice advice but still got the same prob..need to scan many time to detect my wifi and when want to connect the signal lost and cant be detect anymore..

anyone know how to disable the ssid?
i try choose hid my access point.. but after tick this my wifi is not working at all

thanks

i using this modem router too. How do you guys configure to auto connect the dsl line. I have to manually connect each time the power is off....

access ur dsl router 192.168.1.1
username:tmadmin
password:tmadmin

go to quick setup
protocol:PPPoE
connection mode:LLC
streamyx id:any@streamyx (any* ur streamyx login id)
streamyx pass:******** (* ur streamyx passwd)

press next

wireless settion
tick enable wireless if u wanna on ur wireless connection
ssid:ur wireless name ex: mystreamyx
WEP Encryption:enable (if u wanna put passwd to ur wireless connection, if u wanna open connection disable this option)
Network key (WEP):************* (if u enable wep encryption u need to put passwd ex:0123456789abc - 13ACII max)
Channel:auto

press next

lastly press save

------------------------------------------------
hopefully this will help u..and good luck..

yes it will connect. but when off the router... then it wont auto connect

I just got this modem after complaining to streamyx my old innacom used to dc with wireless....... But, i don't see UPNP with the new modem.......
I am too lazy to set up port forwarding for each and every game I play... sienzzz......
Post Forwarding is at Virtual Servers......
Maybe I will set up a DMZ.... maybe not....

---

Added on October 7, 2010, 4:38 pmCrap this router so bad that even it block Window 7 Homegroup..... wtf...

---

Added on October 11, 2010, 12:11 pmOk, fixed the problem... actually not a fix, but a 'workaround'.... haha...
anyway, first i set static Ip with the mac address of all my computers... -from router side
then I let one of the computers go on DMZ. Then, i saved the settings from the router.... opened the file with notepad++, found the DMZ string, added the other computer's static ip into the DMZ list.... BOOM... now windows 7 home group works.... and all my network apps works... YEA....

But, I'm now thinking of buying a TP-Link WR-1043ND, for the N and Gigabit.
Cos i want to stream my videos to multiple computers and want to make image based backups over the wireless for 1 PC and through LAN for 1 laptop.

---

Added on October 12, 2010, 11:54 amAlamak, after actually using the network, multiple DMZ DO NOT work... it worked for a while but now again... not working.. sigh...

This post has been edited by akash3656: Oct 12 2010, 11:54 AM

I just changed from linksys to this w3400v....and the problem is..i cant access to the web setting which is the 192.168.1.1......

Anyone facing the same issue?????

Make sure are you using the power adapter TM gave you?
If not, then use it... (the technician first didn't change the adapter, the router booted, but the PCs couldn't detect it...)
Then use TM's power adapter, working as expected...
and regarding my UPNP thing, the 'workaround' i posted doesn't seem to work.... worked for few minutes, the not working again.. sigh...

And y change from a better brand to a crap brand, sk3pt? Your linksys spoil ar?

Lol...indeed im pluggin with my linksys adapter.. ..i never thought that the power will affect the access for web setting ...Anyhow, ill give it a try tonight....My Linksys WRT54G2 problem la, take forever to connect DSL...but the Crap brand seem having no trouble connecting to DSL...May b i jus aint that pro for Linksys afterall....

anyone know how to disconnect the connection from 192.168.1.1?..i just want to change my ip address without turning on and off my router..

hi guys, got this router from TM today. first impression its bad. the wireless signal keeps dropping and undetectable. plus it has problems working well with legacy devices like mobile phones which i tried (milestone n iphone). it can succesfully connect with a good signal bar but it just wouldnt surf. i've tried various methods to fix this by fiddling with the security settings and also the wireless channel but no luck. any luck on solving this anyone? it seems that im not the only one with this problem.

any new firmware for this router?