Intel® Core™2 Duo/Quad Overhauled Rev. 4, The journey continues...
|
|
 Sep 19 2011, 11:23 PM
Return to original view | Post
#1
|
 
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4   
|
i think that TMPIN2 is chipset temp...
try increase a bit your fsb. if got bsod, pump more vcore. but i'd suggest you to keep the vcore below 1.4V. you can oso try set the ram to lower multi to find the highest clock for proc within 1.4vcore. |
|
|
|
|
|
Feb 3 2012, 04:07 PM
Return to original view | Post
#2
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(frostbiteengine @ Feb 3 2012, 02:02 PM) » Click to show Spoiler - click again to hide... «  but this is sing OCable mobo, P45 chipset while your is G31 which is i believe its not for heavy OCer 2. your psu is not a true power which is not recommended for OC RiG. i suggest you to play safe, find a good true psu at least 400W. example : Gigabyte powerock 390W (RM69) --> your system only use 5450 low end, no need to go higher watt PSU. most important is the psu must be a true power, 80% efficiency and active PFC. 3. 25'C for a room without aircond is consider cold actually. how do you check your temp. what software you use 4. install 3rd part cooler for both gpu and cpu. CPU cooler can find any that suit your budget. CM hyper 212+ only rm115, a very good cooler QUOTE(99killer @ Feb 2 2012, 10:36 AM) » Click to show Spoiler - click again to hide... « mobo, proc, GC, psu, etc This post has been edited by lengchai86: Feb 3 2012, 04:11 PM |
|
|
Feb 3 2012, 11:21 PM
Return to original view | Post
#3
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(frostbiteengine @ Feb 3 2012, 07:10 PM) okay .... my idle temp is 24 degree celsius when load at 32 degree celsius ..... and i just bought 600W psu .... and trying to overclock ...fail set at 410 fsb .... what happen ? - how do you check your temp.about the gpu , i wanna buy a new one ... can give me a suggestion ? - 1gb ddr3 with memory clock speed above 800MHz ( below rm 200 price ) - what psu do you bought. its very important - when you set at 410, what is your ram speed and last "1gb ddr3 with memory clock speed above 800MHz ( below rm 200 price )"--< what do you mean by this. you wan to find ddr3 ram? |
|
|
Feb 7 2012, 04:10 PM
Return to original view | Post
#4
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(frostbiteengine @ Feb 5 2012, 10:11 AM) » Click to show Spoiler - click again to hide... « true power psu is about rm300+ for 600W  ok when you increase the fsb until 400 above (proc clock 2.7ghz above) do you pump the vcore or not.. and the ram, you can try to use lower divider so the ram will run at lower speed or you can try increase the ram voltage at highers ram speed. let say 1.95 volt vdimm. *i found something for you but this is E64 an E63. E63/64 OC they oredy reach limit at 2.6 - 2.8Ghz. i think your's oredy reach the limit  for gpu, if you need a gc that have pcie power, at least try find 5750. 5670 doesn't need any pcie power. you can try find at garage sale, look for used 5750/5770. good luck  |
|
|
Feb 7 2012, 09:14 PM
Return to original view | Post
#5
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(frostbiteengine @ Feb 7 2012, 07:22 PM) » Click to show Spoiler - click again to hide... « your current mobo doesn't have vcore vdimm so its not a OCable mobo i can say if you can go for i5, better find a better card. at least find GTX550 or AMD 6850. much2 better than 520 try find this guy : CEX This post has been edited by lengchai86: Feb 7 2012, 09:16 PM |
|
|
Mar 5 2012, 07:39 AM
Return to original view | Post
#6
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(THE ZUL @ Mar 2 2012, 03:15 PM) Intel Dual Core E5400 2.7ghz | OC 3.6 ghz MSI G41M-P28 2.00 GB ram 800mhz 6-6-6-15 | OC 7-7-7-20 (FSB/DRAM 1:1.20)<--this CL7 at what speed? 800MHz? if default is 800Mhz CL6, OC should be 800Mhz CL5, not CL7. or remain CL6 but at higher speed, >800Mhz. since you are using ddr3, is it your module default at 800Mhz? normal ddr3 nowadays is 1333mhz CL9 HD4870 512mb CM PSU 500W. » Click to show Spoiler - click again to hide... « QUOTE(THE ZUL @ Mar 3 2012, 12:53 AM) my psu CoolerMaster Extreme Power Plus 500W<--CM extreme is not a true power psu but its still good psu compare to chap ayam one. ...... so now stable at 3.6 ghz  <--how do you confirm this setting is stable.. any stress tools? OCCT? prime95 3 hours minimum?QUOTE(THE ZUL @ Mar 4 2012, 08:49 AM) i try OC with 2 diff RAM. it is recommended to use 2 identical ram when OC. diff stick combination can make the OC not stable. try increase the vdimm into 1.65V. 1333Mhz should can go up to 1600Mhz.» Click to show Spoiler - click again to hide... « btw, what is your current mobo. OC mobo have special features at bios, not same as normal low end mobo that doesn't come with OC configuration This post has been edited by lengchai86: Mar 5 2012, 07:46 AM |
|
|
|
|
|
Mar 5 2012, 02:25 PM
Return to original view | Post
#7
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(frostbiteengine @ Mar 5 2012, 09:26 AM) Yay ,bro come to the rescue i'm intel noob la after P4 prescott. only know some basic OC only  |
|
|
Mar 11 2012, 07:26 PM
Return to original view | Post
#8
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(Boldnut @ Mar 11 2012, 04:34 PM) for E5400, anything below 1.4v is safe. try stay below 1.35v. E5 and E8 not same bro. E8 can stay at higher clock at low voltage I can get E5800(Original 3.2GHz) to 3.83GHz(333MHzx11) @ 1.32v no prob. I think u should be able to get pretty stable below 1.35v.  or depends on stepping. some stepping has lower voltage then others at same clock |
|
|
Mar 11 2012, 09:22 PM
Return to original view | Post
#9
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(Boldnut @ Mar 11 2012, 08:49 PM) what the heck u talking about? E5800 is the same chip as E5400. sorry bro miss read your reply as E8500, actually yours was E5800. sorry again for miss understanding  |
|
|
Mar 13 2012, 08:42 PM
Return to original view | Post
#10
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(THE ZUL @ Mar 13 2012, 04:21 PM) » Click to show Spoiler - click again to hide... « » Click to show Spoiler - click again to hide... «  i just wonder what is your default team elite timing and speed... CL6/CL7 is consider tight for ddr3 (normal ddr3 nowadays rate at 1333 CL9) tight is better than loose timing. isit your ram can run only at 800/667mhz due to LGA775 proc? lowering ram freq sure effecting the perfomance (in benchmark) in real world, i doubt we can notice any diff... i normally test the the ram perfomance using aida64 memory benchmark to find the best score. this is not the best software but the test is simple and fast. can get the result in a couple second only example (AMD phenom ii system) » Click to show Spoiler - click again to hide... « This post has been edited by lengchai86: Mar 13 2012, 08:42 PM |
|
|
Mar 13 2012, 09:36 PM
Return to original view | Post
#11
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(THE ZUL @ Mar 13 2012, 09:14 PM) » Click to show Spoiler - click again to hide... «  try change in bios, increase ti vdimm from 1.5-1.6v This post has been edited by lengchai86: Mar 13 2012, 09:43 PM |
|
|
Mar 13 2012, 10:11 PM
Return to original view | Post
#12
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(THE ZUL @ Mar 13 2012, 09:43 PM) ya i oc use BIOS. oh ram frequency at 500 (1000Mhz CL6)yea my ram ratio now is 500. my current RAM stats : » Click to show Spoiler - click again to hide... « if you can set at looser timing, CL7 or CL8 how high you ram can go.. can set at higher divider or not? actually you mobo is not for OC. but still can increase the fsb is quite good edy. |
|
|
Mar 14 2012, 11:58 AM
Return to original view | Post
#13
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(frostbiteengine @ Mar 14 2012, 03:01 AM) i think my rating would be medium - high rate ..... already cool and great he asking about setting.. ratio setting for the ram, not your rating |
|
|
|
|
|
Apr 20 2012, 02:25 PM
Return to original view | Post
#14
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(ervinlew @ Apr 20 2012, 11:53 AM) multiplier mean clock ratio?default clock ratio was auto got 2 option 6 and 7 multiplier proc = processor clock ratio. its not the same thing with FSB : DRAM ratioi tried raise my FSB from 266 straight to 333 the unit went down @_@ result me to reset bios any clue? you need to increase the fsb step by step, not straight big jump from 266 -->333 try 266-->270-->275-->280-->285. QUOTE(frostbiteengine @ Apr 20 2012, 12:09 PM) » Click to show Spoiler - click again to hide... « This post has been edited by lengchai86: Apr 20 2012, 02:27 PM |
|
|
Apr 20 2012, 05:24 PM
Return to original view | Post
#15
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(frostbiteengine @ Apr 20 2012, 04:49 PM) i dunno bro ..... i need to use gc to overclock more higher er.. overclock the proc is not related to the gpu.. how the gpu can make the proc go higher.. unless you want to achieve higher score in the benchmark that come with gpu (graphic test) score, then its different story QUOTE(saturn85 @ Apr 7 2012, 04:39 PM) anyone here tried core 2 duo E6600 at 1.7-1.8v? i dun think any air cooling can do this or even WC in our ambient temp here... is it possible? 1.7-1.8v on this 65nm chips won't too high?  http://forums.extremeoverclocking.com/show...ad.php?t=281210 » Click to show Spoiler - click again to hide... « This post has been edited by lengchai86: Apr 20 2012, 05:32 PM |
|
|
Apr 21 2012, 11:36 AM
Return to original view | Post
#16
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(frostbiteengine @ Apr 20 2012, 08:25 PM) i dunno bro ... if without gc , i can't go higher clocks .... of course with GC we can clock higher, but the brand or series of GC is doesn't matter. any GC will doif you OC without GC (using IGP), we can't clock higher because NB not stable, more heat produce. thats why rule in OC, must use discrete GPU |
|
|
May 28 2012, 03:03 PM
Return to original view | Post
#17
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(DotaGamer @ May 28 2012, 11:00 AM) I oc my e2200 from 2.2ghz to 2.8ghz try change your thermalpaste, try mx4. or even better if you can change your CPU coolerwith stock cooler current idle at 40c , max load for 5mins at 83c , tj. max is 85c i didn't touch the voltage at all, can i increase my oc more n more? 3.2ghz without touching the voltage??  get Cooler Master Hyper TX3 or 212evo temp is no 1 enemy in OC |
|
|
Nov 12 2012, 02:06 PM
Return to original view | Post
#18
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
bumping old thread
reading about BSEL MOD this morning just now spending some time to play with this chip Core2Duo E7400.  covering 1 pin using cellophane tape  OC at bios, i can set the voltage to +100mV = 1.35V using this BSEL MOD, the vcore was set to 1.4V  the result for OC using BSEL mod vs bios setting is almost the same result for Aida64 memory benchmark  This post has been edited by lengchai86: Nov 12 2012, 08:11 PM |
|
|
Dec 5 2012, 07:52 AM
Return to original view | Post
#19
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(epyy @ Dec 4 2012, 08:31 PM) first time OC my E7500 from 2.93GHz to 3.4GHz. googling around, I found that this board should at least can do 400 fsb, push more bro » Click to show Spoiler - click again to hide... «  i'm only using cheap G41 mobo, still able to push until 344 fsb (E7400 344*10.5 = 3.6Ghz), vcore@1.4V http://valid.canardpc.com/show_oc.php?id=2549200 |
|
|
Dec 5 2012, 03:01 PM
Return to original view | Post
#20
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(epyy @ Dec 5 2012, 10:40 AM) » Click to show Spoiler - click again to hide... « and using KVR too. don't worry i just like to keep poisoning people, wanna bring back the OC scene just like during single core/ dual core/ X2 era  |
| Change to: |  0.0452sec
 0.23
 7 queries
 GZIP Disabled
Time is now: 3rd December 2025 - 03:42 PM |
Quote
