anything that i need to change to achieve stable 4.0 ??


Robust Graphics Booster ...............: Fast
CPU Clock Ratio .......................: 8
Fine CPU Clock Ratio ..................: 0
CPU Frequency .........................: 3.76 GHz


--> Clock Chip Control <--

>>> Standard Clock Control
CPU Host Clock Control ................: [Enabled]
CPU Host Frequency (Mhz) ..............: 470
PCI Express Frequency (Mhz) ...........: 100
C.I.A.2 ...............................: [Disabled]


>>> Advanced Clock Control
CPU Clock Drive .......................: 800
PCI Express Clock Drive ...............: 900
CPU Clock Skew (ps) ...................: 0ps
MCH Clock Skew (ps) ...................: 0ps


--> DRAM Performance Control <--

Performance Enhance ...................: [STANDARD]
(G)MCH Frequency Latch ................: [400]
System Memory Multiplier .......(SPD)..: 2.00D
Memory Frequency (Mhz) ..........800...: 940
DRAM Timing Selectable .........(SPD)..: [Manual]

>>> Standard Timing Control
CAS Latency Time .................5....: 5
tRCD .............................5....: 5
tRP ..............................5....: 5
tRAS .............................18...: 15

>>> Advanced Timing Control
tRRD .............................3....: 3
tWTR .............................3....: 3
tWR ..............................6....: 6
tRFC .............................42...: 42
tRTP .............................3....: 3
Command Rate (CMD) ...............0....: 2

--> Channel A <--

>>> Timings Settings
Static tRead Value ...............11...: 10
tRD Phase0 Adjustment ............0....: [Auto]
tRD Phase1 Adjustment ............0....: [Auto]
tRD Phase2 Adjustment ............0....: [Auto]
tRD Phase3 Adjustment ............0....: [Auto]
Trd2rd(Different Rank) ...........6....: [Auto]
Twr2wr(Different Rank) ...........6....: [Auto]
Twr2rd(Different Rank) ...........5....: [Auto]
Trd2wr(Same/Diff Rank) ...........8....: [Auto]
Dimm1 Clock Skew Control ..............: [Auto]
Dimm2 Clock Skew Control ..............: [Auto]

>>> Driving Settings
Driving Strength Profile...............: 800MHz

--> Channel B <---

>>> Timing Settings
Static tRead Value ...............11...: 10
tRD Phase0 Adjustment ............0....: [Auto]
tRD Phase1 Adjustment ............0....: [Auto]
tRD Phase2 Adjustment ............0....: [Auto]
tRD Phase3 Adjustment ............0....: [Auto]
Trd2rd(Different Rank) ...........6....: [Auto]
Twr2wr(Different Rank) ...........6....: [Auto]
Twr2rd(Different Rank) ...........5....: [Auto]
Trd2wr(Same/Diff Rank) ...........8....: [Auto]
Dimm1 Clock Skew Control ..............: [Auto]
Dimm2 Clock Skew Control ..............: [Auto]

>>> Driving Settings
Driving Strength Profile...............: 800MHz

--> Motherboard Voltage Control <--

>>> CPU
Load-Line Calibration .................: [Disabled]
CPU Vcore ...............1.27500V......: 1.31250V
CPU Termination ........ 1.200V........: 1.240V
CPU PLL .................1.500V........: 1.570V
CPU Referen .............0.760V........: [Auto]

>>> MCH/ICH
MCH Core ................1.100V........: 1.200V
MCH Reference ...........0.760V........: [Auto]
MCH/DRAM Ref ............0.900V........: [Auto]
ICH I/O .................1.500V........: 1.570V
ICH Core ................1.100V........: 1.200V

>>> DRAM
DRAM Voltage ............1.800V........: 1.800V
DRAM Termination ........0.900V........: [Auto]
Channel A Reference .....0.900V........: [Auto]
Channel B Reference .....0.900V........: [Auto]

--> Advanced Settings <--

Limit CPUID Max. to 3 .................: [Disabled]
No-Execute Memory Protect .............: [Enabled]
CPU Enhanced Halt (C1E) ...............: [Disabled]
C2/C2E State Support ..................: [Disabled]
x C4/C4E State Support ................: [Disabled]
CPU Thermal Monitor 2(TM2) ............: [Enabled]
CPU EIST Function .....................: [Disabled]
Virtualization Technology .............: [Enabled]