Overclockers

Im currently at 3.8ghz on Q9550 E0 using P5Q DLX but having difficulty in getting 4.0ghz

Anyone able to get their Q9550 E0 to 4.0 using P5Q DLX....help would be appreciated. And one more thing, do u guys use OCCT ? I ran OCCT after OC and it keeps on stating CPU too hot but when run on Prime95...no errors

Didnt manage to stabilize at 4ghz....keeps on crashing out. Whats the recommended for GTL Ref and VTT...I inserted GTL both at 0.68 and VTT at 1.57 and it turn out crash.... lolx

Btw, wats VNB ?

alrite..got tht....whats the range for vtt for quad core...vcore currently is 1.37 for 3.8

---

Added on April 21, 2009, 10:12 pmOCCT just stating tht CPU is hot thts all....im stressing it inside hostel...does the temperature in the room have effect ??

This post has been edited by his: Apr 21 2009, 10:12 PM

so, tht means i put VTT on auto ? current VTT now has changed to 1.4, does my PLL also have to change to 1.4 as its now at 1.56. Also i increased vcore to 1.375

cpu temp is now idling at 39 but stressing is at highest 70

Is tht ok ?

bro,

so tht means i change my PLL settings to auto and remain the vtt at 1.4 even after i try OCing to 4.0ghz ?

hey guys....im currently at 4.0ghz using 1.43v and upped vtt by 1.32 ? is it ok ? tends to crash during prime and then restart

ok changed now vtt is at 1.32, vcore at 1.46 and temps when running small fft on prime 95 is 81,76,78,80 on all 4 cores....please advised if anything is wrong

idling temp is around 50-55, using xigmatek hdt-1283, intending to break it to 500fsb to see if my proc and mobo able to. Running daily would be around 4ghz

---

Added on April 23, 2009, 11:00 pmidling temp is around 50-55, using xigmatek hdt-1283, intending to break it to 500fsb to see if my proc and mobo able to. Running daily would be around 4ghz

This post has been edited by his: Apr 23 2009, 11:00 PM