currently i'm fine tuning my rig,so have to slow slow tune cause i have exam this few days,but still tangan itch go do some fine tune too.

anyway,will update u asap,no worry about this.

btw,is Q9450 @ 3.2GHz with 1.11vcore consider good?

oh well...thanks alot ya... wish u the best of luck in ur exam

exam....Add oil...can add blood if u wan

just got this oem e6230, can OC to 3.5ghz
got 1 problem, why my mushkin HP2-8500 cannot run at ddr2 1066 speed, which is stock?
even i set to any divider to use, will fail to boot.. i even +vcore to 2.3v which is more than stock suggested still cannot boot..
is it the ram problem? can i change it with shop??


Attached thumbnail(s)

waa.. got or not... 1.11v @3.2ghz ar ... i can do 3.2ghz on stock vcore only...

What suck is your max clock imo
You need tpower i45

no one comment my oc...T-T

2.3vcore?
i think it's 2.3vdimm right?
anyway,there might be one stick of them is a bit faulty,try to swap the ram slot.
if the problem still there,u have to test the ram with only one stick and run them in 1066 speed.
good luck in trying

yup,confirmed prime stable with 1.11vcore

it vdimm.. lolz.. ady tried swap ram slot and it boot into window, orthos 5 sec fail. and application crashes...

maybe if u could give a bigger picture so people can read the readings on ur screenie better plus it would be good if u could fire up coretemp or any other temp software, so people can have some idea what is the temp like running at 3.2G. and how long did u run prime95/occt before it failed, at what vcore, what vdimm used, blabla...u just cant simply paste ur superpie screenie and said that u cant get to 3.2G and expect people to help u...they (coz i'm no sifu either ) need the info to help u.
so, good luck

C2D E8200
Mobo: Asus P5k se/epu
memory : TWIN2X2048-6400C4DHX 2x1gb

i can only OC till 3.48ghz and my ram only till 860mhz

further than than i system crash dee...wats the limit of my system?

is this good enough for my rampage+q9450 was thinking of 24/7 setting..

pll:1.57
vtt:1.2
vcore:1.16
@3.4ghz





yo ace tell me ur final setting

This post has been edited by kaiser_falco: Jul 29 2008, 04:40 PM

wow q9450...but i prefer c2d E8600....but no $$..

guys,i was just wondering,i know that G0 runs cooler,but how does B3 performs?is there any exception for certain batches etc?

ok.this my new result,pls comment

Surprisingly E4500 can run 400fsb

bro...just 399.i try to push to 400 but failed.

Mine...i'm new to intel..before this AMD fan..lolz..

CPU : C2D E4400 L2
CPU Clockspeed : 3.33Ghz (333x10)
Motherboard : Abit FP-IN9 fatal1ty
RAM Model : Crucial Ballistic 8500 DDR2
RAM Capacity : 2x1GB
RAM speed : 400MHz, 5-5-5-18
RAM mode : Dual Channel
Cooler : AC freezer 7
Time : 17.953s

@ryudox

unlink ur ram ro fsb ratio.
then run ur ram in 1066MHz CL4,try to push ur ram and u will see some improvement.

@ryudox

hav u try to push higher ur bus speed?
n....it is better if ur cpu n ram ratio is 1:1....