No deal.

Have to include some important factors e.g. type of cooling, speed PLUS vcore and ambient temperature (e.g. air-con)....

Eh.... I just remember I don't have a 45nm.....

This post has been edited by kmarc: Jul 21 2008, 03:30 PM

ya agree agree..even me dont know what temp should i follow
core temp,real temp,from bios all give different result..

nvmind then i just give one from bios reading
intel E8400 at 3.8ghz ,1.32v idle 31`c load 34`c - 36`c

i now currently using xigmatek red scorpion s1283...ahaha duno good not

---

Added on July 21, 2008, 5:49 pmi read it from review...many ppl said its quite good

This post has been edited by enson: Jul 21 2008, 05:49 PM

even my vanilla xigmatek also good enuf ady..
why not yours..just make sure u install properly ok la

i facing weird problem with my q9550, the temp seems inbalance no matter how i remount, IHS or mayb didnt use quad core nozzle and uses 4.5mm nozzles? if tht's the problem i'll just leave it there, lz to disassemble my wc...

This post has been edited by lichyetan: Jul 21 2008, 09:48 PM


Attached thumbnail(s)

erm...my temperature is 49 degrees...shud not be that hot rite? i installed properly dee..i using ss kit

@lichyetan
Same as my q9300. No matter what you do still same.

-pWs-

49`c?but we not sure if that is the real temp..
if u check the temp wif different utility all result are not the same

i read this using core temperature,...but BIOS show me cooler..43 'c...i wonder which wan more precise

thats the problem..
i ask here b4..now still confuse which are the real temp..
but for my motherboard..got temp indicator inside..
if what shown at it is real im happy ady

RealTemp and CoreTemp are basically the same.
The difference is that they using different Tjmax value if you notice it.

-pWs-

most mobo got temperature indicator inside rite...haha

---

Added on July 22, 2008, 8:14 amtj max...my core temp utility show me 105d'c..wow...

---

Added on July 22, 2008, 8:16 amusing everest software
cpu - 39d'c
core 1 and core 2 - 49'c


This post has been edited by enson: Jul 22 2008, 08:16 AM

prolly ur IHS is convex on one side...core 0 and core 2 are rougly similar, same goes for core 1 and core 3...so, maybe on core 0 and core 2 side, it is slightly convex...less contact compared to the other side. just an idea.

my Q9450 @ 3.2GHz 1.12vcore idle

core temp reading

48c 46c 44c 44c

load
56c 56c 51c 50c

using TRUE and TX-2

for me it's consider very hot,but i'm not sure which TJ Max to follow but i prefer the hotter one.

any idea?

ya,but for enson case he might get confuse with it..
u know what the Tjmax ka bro?i cant find any webby


err..sorry,i mean the one wif digital screen

ooo...maybe...

---

Added on July 23, 2008, 12:16 amohh..is it reliable?

This post has been edited by enson: Jul 23 2008, 12:16 AM

mm..thats what im still thinking of..
but what it show are same with few other utility

and guys,i think my core temp is quite high..

on load core 1 and 2 is 49`c to 53`c

i think the temperature is depend on mobo.

i tried E7200 on Maximus II Formula and a MSI P35 Neo 3,both reading totally different,

same wif my case..
my asus p5kc and now biostar give different reading also..
is it cause of the chipset?
just now i try use everest ultimate to read the temp
cpu temp is 32`c and only the core temp too high..
err sorry for noob question,which one we should consider when we OC?the cpu temp or the core temp?for me either if one of the temp high sure
i`ll do something for it

CPU : C2D E8400
CPU clockspeed : 4.824ghz
Motherboard : Abit IP35 Pro
RAM model : Crucial Ballistix Tracer 800mhz
RAM capacity : 1GB X 2
RAM speed : 536MHz, 5-5-5-10
RAM mode : Dual channel
Cooler : Dtek Fuzion V2
OS:Window XP daily os

Done some benching just now.
Hit 4.8ghz with some v changes