Haha...You are new here, so you dunno
We all know

@AceCombat
Thanks

-pWs-

@lichyetan
Same as my q9300. No matter what you do still same.

-pWs-

RealTemp and CoreTemp are basically the same.
The difference is that they using different Tjmax value if you notice it.

-pWs-

Go for E7200 better. Just my opinion

-pWs-

Yea...cheaper than e8 series.
Overclockability dunno

-pWs-

Quad is hard to oc compared to Dual.
If you want to buy Quad, better choose a nice board

-pWs-

It depends on your preference and ram capabilities.

Preference
If let say you only use 400 (FSB), your ram will run @ 800MHz 1:1.
From here, if you want to overclock ram, you can use other divider.

Ram Capabilities
If you use 500(FSB), your ram will run @ 1000MHz++ on 333/800
Now, most of the ram can run more than 1000MHz. But if take for example, the ram cannot run more than 1000MHz. So you will forced to use 1:1 to lower down the ram speed.

-pWs-

Should be fine w that temp n vCore.

-pWs-

My Q9300 highest temp is 72.

-pWs-

What ram is that??

-pWs-

Bro silverfire,

Please update mine.
Thanks a lot.

14.637 - -pWs- - 3.508GHz, 467 x7.5 / DFI DK P45 / 4GB DDRII-935, 4.0-4-4-8 / Thermalright 120 Extreme



-pWs-

This post has been edited by -pWs-: Oct 6 2008, 02:25 AM

Ermmm...GTL is like abstract thing. Hard to know which one is sweet point.
Have to trial and error many many times.

-pWs-

http://www.xtremesystems.org/forums/showthread.php?t=202292

-pWs-

New version RealTemp should have Tjmax set to 100 by default.
Am I wrong??

-pWs-

This post has been edited by -pWs-: Oct 28 2008, 05:35 PM

Ermm...it seems that DFI DK P45 T2RS Plus having low 12v rails is true.

Anyone measure using DMM?

-pWs-

This should go to Hardware Questions & Answers

Anyway, it is up to your choice whether to stick w Intel o go to AMD.

-pWs-

Look on this.
This guide by kmarc will give you some ideas on overclocking.

http://forum.lowyat.net/index.php?showtopic=623648&hl=

-pWs-

Stock should be 1.275 from CoreTemp right?
But VID differs from board to board.

-pWs-

There are still few seconds to boot up even stock setting.

-pWs-

SPI 1M does not prove your current setting is stable neither bro.

-pWs-