Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed
4 Pages < 1 2 3 4 >Bottom

Outline · [ Standard ] · Linear+

 abit Fatal1ty AN8 for AMD 64bit, Overclocking ability...

views
     
emilz
post Feb 21 2006, 03:01 AM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(cyberloner @ Feb 21 2006, 02:16 AM)
If you are using online update ... confirm u have downloaded a corrupted bios file and flash... (so never online update the bios or kill the mobo)

suggest...
find an an8 board and borrow the bios and plug in your board to test...
if can boot means your bios is corrupted...
so u need to hot flash it...

hotflash
boot by using workable bios, and boot to a floppy that can boot into dos and have the bios of your board... take out the bios chip and put in your bad bios chip in it..
and type runme

if fail to find a bios/ rma it

Hope this help...
*
in my u i'm the only one used this mobo liaw
right now it cannot enter the bios cannot display anything and oso can say cannot press anything

what do you mean buy taking out the bios chip blink.gif
sound like ambulance at the speaker


(borrow the bios and plug in your board to test...) cannot understand by the meaning borrow the bios

(boot by using workable bios) oso cannot understand

sorry i very noob and hard to understand
emilz
post Feb 21 2006, 03:04 AM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(pcmoddingmy @ Feb 21 2006, 02:20 AM)
Bro, did the BIOS flash successfully?
If yes, try using a single stick of RAM instead of one pair.
Else, grab another stick of RAM and try to get the system to boot.
*
right now the thing is, it cannot run any bios it like hang at reading 90 at the seven segment display
try many thing already
change psu, ram, take out the cmos (leave it around 5 Hours and now tring to leave it more than 24 hours)
emilz
post Feb 21 2006, 11:19 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(cyberloner @ Feb 21 2006, 09:32 PM)
take out the motherboard from casing?
and boot outside the casing?
unplug all cdrom/ floppy

some cdrom/ dvdrom cannot mix together... that happen to me while test AX8 that day....

if still cannot RMA is the last solution for u
*
done already larr

i already take out the board from casing and on it with out plug in anything
just plug in the 4 port connector and the 24 pin for mother board and still cannot boot up and enter bios and still hang at 90 lorrrrr

this weak maybe sent for rma larrr and need to wait for several month

and for thous who have an idea please lar help me before i'm sending the board for rma

cause i cannot used my computer and need to fasting playing games liaw.....
cry.gif cry.gif cry.gif
emilz
post Feb 22 2006, 06:47 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


helloooooo

tq for those who help me with my mobo prblm

now ok dont know why i just unplug the c mos battery and leave for 2 days and now ok liaw

it seams that the bios ver 20 not very stable cause after plug in all the mobo back to cpu it hang again and now with old 19 it ok wink.gif wink.gif
emilz
post Feb 23 2006, 09:23 AM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(tictac @ Feb 22 2006, 11:10 AM)
Ok 2more bios for ABIT AN8/AN8 ultra/AN8 SLI/AN8 Fatal1ty/AN8 Fatal1ty SLI

Both bios have DDR300 & DD366 divider enable

1) AN8_20-78us
- with tref @ 200MHz 7.8us
Download LInk: http://forum.abit-usa.com/attachment.php?attachmentid=16398

2) AN8_20-156us
- with tref @ 200MHz 15.6us
Download Link:
http://forum.abit-usa.com/attachment.php?attachmentid=16399

You can enable and disable the patch via bios menu...  smile.gif

As recomended by bigtoe... hope this tref gain you more bandwith wink.gif
*
tic tac is it stable i affraid to kacau the bios already lorrrr laugh.gif

emilz
post Feb 23 2006, 05:05 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(ah_khoo @ Feb 20 2006, 03:13 AM)
dats y old way of bios flashin still d best for me... windows based is kinda risky sumtimes...  smile.gif

mebe dfi way of clearin cmos will help...

unplug all psu connection on d board & batt, leave it for hours then try again...  wink.gif
*
can u help me teach how to do bios flashing the old ways by using thumb drive
since i don't used floppy
smile.gif
emilz
post Feb 24 2006, 08:21 AM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(cyberloner @ Feb 23 2006, 07:52 PM)
The best way to update bios ...
U need to format your usb drive to have system file to boot in dos...
Depent what brand u have there and the software comes with it...
U need to use the software utility to make the usb drive to boot and not by windows...
If the usb drive can boot... what u need to do is just copy all the bios file in the usb drive and type "runme"
*
how to format with have system boot in dos...
don't know ooooo
is it in window rght klick n pick format but cannot create one oooo
emilz
post Feb 24 2006, 03:50 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(wadieq @ Feb 24 2006, 03:09 PM)
how do u flash ur bios b4 this ?? i only use abit flash menu and no problem at all  thumbup.gif
*
abit flash menu lar after what have dont to me i affraid to do that again and want to updated the old way
emilz
post Feb 24 2006, 07:13 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(cyberloner @ Feb 24 2006, 05:14 PM)
told u already...
u need use your flash driver software that comes with it....
if kingston... go www.kingston.com and download the utilities for it to format usb drive as a bootable usb drive...
*
hahahah
sorry n tq for everythng laugh.gif
emilz
post Mar 28 2006, 04:56 AM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


want to ask u guys sice u guys used ur fatality did u guy having any problm wif bios or something like hang or anything ka

mine always hang at bios n some times cannot acces bios n last time got problm already wif the bios

want to trow already my board n take new board lar????? icon_question.gif icon_question.gif

any suggestion
emilz
post Mar 28 2006, 06:18 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(wadieq @ Mar 28 2006, 08:33 AM)
hang at bios when i use abit an8 ultra.. problem solve when i change psu to the new one...  i think it hang because not enough power (using icute = 4 hdd + 2 optical drive + 4 case fan, hhehe)

what PSU that u use ??
*
acbel 550w gold series

is it ka????
conform ka
emilz
post Mar 29 2006, 01:00 AM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


want to ask lar y everytime after i off my supply to my comp, n when on it back the bios promp that the cmos already been cleared......
yhe only thing that has been reset was the cpu freq lets say i set it to 250Mhz and it reset it back to normal setting 200

why????? ar it be like that

y arrrr cry.gif cry.gif

icon_question.gif icon_question.gif icon_question.gif

This post has been edited by emilz: Mar 29 2006, 06:20 AM
emilz
post Mar 29 2006, 07:23 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(r4ydc24 @ Mar 29 2006, 02:55 PM)
AFAIK, mobo has itz own mechanism to reset its own setting(if they r capable to) if u OVER-overclock.. ahhahaha. meaning, the mobo kenot tahan already.

xplanation using metaphor:
mum ask Johnny to wear the pink pants coz it looks nice. Johnny kenot tahan, once mum leave the room, he change into a Bermuda again. ahahahaha  sweat.gif

datz wat i think personally. correct me if i'm wrong guys.. my AN8 only behaves dat way when it is overclocked. not in stock setting.  thumbup.gif
*
ok let say i oc it 2.4 n up only 0.4 for the frequency
voltage supplied through it only 1.45V
voltage supplied to ram 2.70V n the fsb set to 4x multiplier n the setting of the ram that rclxub.gif one depends on someting2 lar

it still the same results last time when i oc it it goes smoothly no problem until now only

y arrrr rclxub.gif rclxub.gif
emilz
post Apr 3 2006, 11:57 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(satanhead2003 @ Apr 2 2006, 11:39 PM)
hmm... so the fatal1ty is out of the equation now. sad.gif can u guys recommend me a mobo ( except DFi ) with rm650 max budget?
*
wait for few mont cause amd want to lunch their new mobo system i think
the mobo that can run with ddr2
n the else i dont know.
maybe around 2 or 3 month

now i oso wait cause want to throw away my abit fatality n get new mobo drool.gif

emilz
post Apr 12 2006, 10:33 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(satanhead2003 @ Apr 11 2006, 10:15 AM)
The way i write it, hmmm. I tell them, i do oc the proper way, increasing voltage, lowering LDT and such. I oso give them links to "complained" at their official forum here  http://forum.abit-usa.com/showthread.php?t=86928 and full length description on the 1T problem here  http://www.maxitmag.co.uk/article.php?articleID=313. Even if i described the 1T problem wrongly, then, these two links should explained it. They sent me a second email n suggesting me to rma the mobo to taiwan.

cheers... I'm off wit abit.
*
yo..
same as me i off wif abit now plan to get dfi but dfi damd expensive
emilz
post Apr 16 2006, 10:29 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(shift2 @ Apr 16 2006, 06:34 PM)
shocking.gif 80C is hot ler..my Abit only 38C in hot sunny day .. smile.gif
*
haha mine only 28C wif my big water SE

with out OC icon_rolleyes.gif
emilz
post Apr 25 2006, 01:51 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


want to ask u guys lar since i start to OC my mobo keep on reset the oc which i already determine..

currently oc at 2.4 only and volt 1.42~1.45 x4
amd 3200++ winchester

what are the problem

bios ver 2.0
rclxub.gif rclxub.gif rclxub.gif rclxub.gif




emilz
post Apr 26 2006, 04:50 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(r4ydc24 @ Apr 26 2006, 04:06 PM)
emilz, haf u tried checking the RAM timing? coz AFAIK, Abit mobos are able to reset the setting everytime an unsuccessful oc haf been done.. since uya proc aint clocked dat hi, mebbe bcoz of the ram.... juz check to make sure.. smile.gif hope dat helps
*
i check already seem no problm 2.7V at ddr333 and 2t

wink.gif how
emilz
post Apr 27 2006, 06:28 PM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(jarofclay @ Apr 27 2006, 05:42 PM)
Perhaps you'd like to run the mem settings at 3-4-4-8. See if that helped.
Your E6 should be able to run 2.7ghz with ample cooling @ 1.55V. Slowly increase the vcore uptil 1.625V until you hit the jackpot for stability. However, make sure cooling is good enough.
*
sory asking stupid question

where to set 3-4-4-8 i know it was in the ram timming setting but which one because there was to many to set
emilz
post Apr 28 2006, 04:01 AM

Regular
******
Senior Member
1,377 posts

Joined: Jan 2003
From: Nothing special


QUOTE(jarofclay @ Apr 27 2006, 06:36 PM)
Check the attachment.
*
tq bro

how about the other timming oso need to kacau or just them
« Next Oldest · Overclockers United · Next Newest »
 

4 Pages < 1 2 3 4 >Top
Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0297sec    0.17    7 queries    GZIP Disabled
Time is now: 3rd December 2025 - 09:11 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.