irenic i can see a lot of user use san diego with all AN8 XXX version... in the abit forum

It have no problem at all to run the X2 CPU...

This post has been edited by cyberloner: Sep 18 2005, 01:01 AM

abit cheap, pretty, nice led, 4 phase power, oc stable, nice uguru software, 100% Japanese capasitor, 1st board with softmenu oc technologies, 1st company using OTES design,
1st board using cooper chipset cooling,
1st 3rd EYE OC technologies (no others can) <-- more than enough and cheap too...
new panel guru direct reset cmos from casing front side...
audio max sound card off the board with nice red led...
using digital optical sound output... (real optical)
oc stable means use pc more than stay in front pc oc oc oc and crash..

Hardocp....
http://www.hardocp.com/article.html?art=NzE3LDc=
Once again we saw a DFI motherboard fail when it comes to long-term stress testing. By "long-term," we mean in excess of 24 hours. While most of the latest heavy hitters from the likes of ABIT, ASUS, and MSI will literally run error free for days under 100% load


DFI LanParty UT nF4 SLI-D
http://www.hexus.net/content/reviews/revie...mlld19JRD0xMDA5
You can see a three-phase power delivery circuit next
( Answer for those argue with me about 3 phase of DFI )

hope DFI can upgrade their board for more stability... maybe tommorow i'll buy...


This post has been edited by cyberloner: Sep 19 2005, 01:09 PM


Attached thumbnail(s)

i dun like cool boot....
oc high high... turn off pc...
turn on again.. cannot boot... =X

Manchester new cpu?
not san diego?

AN8 Ultra is still there....


This post has been edited by cyberloner: Sep 22 2005, 12:39 AM

hell yea
AN8 Ultra got few box here =X

When it launch said and show 3.55 vdimm
new bios now is 3.4 vdimm ....

nforce 4 ... same as AN8

Official Released bios 18 for AN8 Family
OTES dissapear problem with Fatal1ty AN8 SLI
Fix know Fatal1ty SLI otes missing and fix system problem with X-FI sound card...
1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. BIOS compiled date: 09/27/2005

http://cyguru.com/bios/an818.zip



This post has been edited by cyberloner: Oct 20 2005, 10:29 PM

the link i posted is released full version bios 18 now..
X-FI Issue is confirm fix...
1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. BIOS compiled date: 09/27/2005

confirm it is fix compartible with X2 too...
updated ram timing...

it is so far so good to me...

dual 512 kingston value ram with hynix chipset go to 300MHZ @@"
that's WOW

i dun think that rm200 worth... for it...
u have uGURU clock for replacement....

if u are into oc with it... i do suggest u clock from bios cause it is the best way....

µGURU clock...
u can buy it seperately....
it also comes with the 3rd eye mobo.....

about the panel ... no news about it...
heard abit is releasing it but no news about it ...

it is cpu limit....
or maybe not enough voltage.... push more vcore and prime95...

mine can push more but i prefer lower a bit than using max oc
as i know the board can support high htt but was limited by cpu...
if have good cooling + lower multiplier + full vcore ... high htt can be archieve

normal cause it is a fake temp anyway

u guys use tiptac modded ver?

yo AN8 friend.. bios 20 is out
and fix usb / ram issue + support new amd fx cpu.... go update
it should be a good update to you guys

yea more ram option
and the ram setting .. ras precharge set it correctly.. so i dun need to change from 2 to 3 ...
for u irenic



This post has been edited by cyberloner: Feb 17 2006, 07:59 PM


Attached thumbnail(s)

yea DFI .. oc very high....
but stable overclocking still abit....

remove battery a while... put back on..
try boot...
if cannot change ram slot to 3-4 and try boot...
if cannot change power supply... and try boot....
never update bios by using online update...


This post has been edited by cyberloner: Feb 20 2006, 01:45 AM