imho, abit an8 is a damn good overclocker but DFI is simply better. check the ocing results. dfi constantly scores higher.

yes agree.. n the cpu limit is 1.7v
but with 1.6v vcore limit thats the max i can go. i think if i got 0.1v extra, i can go further.. coz other board r up to 1.7v


This post has been edited by e-jump: May 6 2005, 08:58 AM

well...the board is certainly capable of reaching that speeds, but it all draws down to the processor and ram that is paired with it...do some research before purchasing (like me...looking for good 3500+ processor )

up to 313mhz HTT


Attached thumbnail(s)

anymore fan boys here want to say something before i close this thread?

Edited by PCcrazy: thread cleaned..fear of unnecessary flaming

This post has been edited by PCcrazy: May 13 2005, 01:31 AM

AN8 Fatal1ty SLi


Source :
http://www.technoa.co.kr/content/View.asp?pPageID=57474

With Guru front panel around �110 + VAT

Source :
http://www.theinquirer.net/?article=22994

Anyway the voltage option looks serious at 0.05V increasement
Adjustable VTT voltage & new VTT divider ddr/2

Hope they back in game

the ABIT AN8 Fatal1ty SLI

Vdimm : 2.50V - 3.55V
Vtt voltage: 1.25v ~ 1.75v and DDR/2



Source :
http://www.bodnara.co.kr/bbs/?imode=view&D...1&&category=150

Yes ABIT Build to KILL...
my Precious
http://www.abit-usa.com/products/mb/techsp...ies=1&model=246

New uGURU Clock
http://www.abit.com.tw/upload/products/guru-panel.htm

This post has been edited by cyberloner: May 13 2005, 05:30 PM

wow.... nice one...

Dear all user...
please check out here..
http://www.tomshardware.com/motherboard/20...ket_939-17.html

CPU-Z Ver 1.29

* New PCI devices report.
* Switch for VCore report in .ini file.
* VCore report on some uGuru mainboards.
* Improved clocks computation.
* Improved support for latest AMD CPUs, Celeron D 3x1 (EM64T).
* Improved support for SiS 649, 650 and 656 chipsets, Intel 915PM chipset.
* Improved stability when several instances of CPU-Z are running in the same time.
* Restored html report in ghost mode (see "Parameters" chapter above).

Your question is answered....
Thanks for care ahout my vcore....

ABIT Fatal1ty AN8

b4 i got consider about this board also but i won't use SLI, so i go for AX8, not bad also

DFI....you wont regret it....

Guys, was just wondering bout the CMOS switch on the Fatal1ty mobo. Shud b quite easy for us to do the same right? Just plug in 3 wires to the CMOS point n put a switch at the end of it to switch between 1-2, 2-3. Anybody tried it b4?

ABIT FATAL1TY AN8 SLI
You won't regret too

dun want SLI

go for FATAL1TY AN8

This post has been edited by cyberloner: Jun 10 2005, 01:24 AM

Dude don't go for SLI unless you plan to SLI 2 6800Gt's ... if you plan to SLI 6600GT... it's better you buy one 6800 ultra or Gt...look at the SLI board after installing the Card you got hardly any place for normal PCI cards alredi....put one Audigy zs there,..gone...normally a 6600GT's fan will encroach onto the next PCI slot..... don't get SLI unless you plan to SLI the HIGHEST end card... because 2 SLI cards give you lots of Power, but also cost you lots of power and create lots of heat...... In my opinion SLI isn't that good an idea, DFI overclocks better but Abit offers better package.., at lyp i think you can find Fatal1ty for RM630, DFI around RM700,... but if you really want SLI... I think DFI lanparty is the only way to go.

anyway.DFI can support to go higher fsb n vdimm as well..

i got fren using Abit fatality,it's really stable n look cool

No doubt the Fatal1ty is a great board, but most hardcore OCers still using DFI

Emm this two board got it own Pro n Cons

It need to c whatever wat kind of user u r

Wan powerful OC go 4 DFI

abit look great wif it OTES but OC litter lose to DFI..

Maybe it is still in beta bios..
hope new bios is better....

i buy for RM59X but you all buy for RM 7xx
=P

This post has been edited by cyberloner: Jun 13 2005, 01:55 AM